Maytag/Maytag_Thumb/52497.gif
See part 9 in the diagram
( Grid squares measure 1x1 inch )

Get in touch, we're here to help!

Open until 10PM EST

customerservice@partselect.com

Timer

$ 269.65   On Order

Get this part fast. Average delivery time via standard shipping: 1.8 days.

PartSelect Number PS11739392
Manufacturer Part Number WP22002867
Manufactured by Whirlpool
Product Description

Timer Specifications

The timer controls most of the operations of the washer: water level, tub filling and emptying, length of cycles, and cycle setting sequences.

How Buying OEM Parts Can Save You Time and Money

Troubleshooting
This part fixes the following symptoms:
Timer will not advance
This part works with the following products:
Washer.
This part works with the following products:
Maytag.
Part# WP22002867 replaces these:
22002867
Questions and Answers

We're sorry, but our Q&A experts are temporarily unavailable.
Please check back later if you still haven't found the answer you need.

Customer Repair Stories
 Average Repair Rating: 4.4 / 5.0, 2 reviews. What's this?
    Sort by:
    Sorry, we couldn't find any existing installation instruction that matched.
    The washer was stopping at each part of the wash cycle
    I looked at the exploded view that was posted on the website which was a big help. I took off the back and took off the control knob. I then unscrewed the timer from the console and it took a couple of minutes to realize that the timer moved to the left and had these lugs that anchored it to the console. The fact that there was only one screw should have been a give away. The hard part was disconnecting the wiring plug from the old timer.
    The install was in reverse and easy.
    The only problem is that while the washer no longer stops at every step of the cycle it still periodically stops at the 2nd and the 3rd rinse.
    I don't know what that is, I suspect it is a relay but I am having trouble figuring out which relay it is.
    Overall, it ws a piece of cake and the washer does run better.
    • Fred from Riverside, CA
    • Difficulty Level:
      Easy
    • Total Repair Time:
      15 - 30 mins
    • Tools:
      Screw drivers
    • Parts Used:
      WP22002867
    20 of 20 people found this instruction helpful.
    Was this instruction helpful to you?
    Thank you for voting!
    machine stopped at rinse cycle. shut off.
    removed 5 screws from back of control panel holding back panel cover. removed control knob from front of control panel. removed screw holding Timer. slid Timer module to right and pulled Timer out. disconnected plug from old module. plugged
    new module in and reversed previous removal procedure. Unfortunately this did not correct the problem as machine still stops at rinse cycle and shuts down. misdiagnosis on my part. called repairman and he diagnosed a bad control board.
    Cost is 3 times cost of Timer alone.
    • Royce from Woodstock, GA
    • Difficulty Level:
      Really Easy
    • Total Repair Time:
      Less than 15 mins
    • Tools:
      Screw drivers
    • Parts Used:
      WP22002867
    16 of 18 people found this instruction helpful.
    Was this instruction helpful to you?
    Thank you for voting!
      Model Cross Reference
      This part works with the following models:
      PartSelect Number: PS11739392
      Manufacturer Part Number: WP22002867
      Brand
      Model Number
      Description
      Maytag
      MAH4000AWQ
      Washer - Residential
      Maytag
      MAH4000AWW
      Washer - Residential
      Maytag
      MAH4000BWQ
      Washer - Residential
      Maytag
      MAH4000BWW
      Washer - Residential
      Maytag
      MAH5500AWQ
      Washer - Residential
      Maytag
      MAH5500AWW
      Washer - Residential

      Get in touch, we're here to help!

      Open until 10PM EST

      Contact Customer Service