See part 9 in the diagram
( Grid squares measure 1x1 inch )
Timer
$240.62
In Stock
In Stock
Get this part fast. Average delivery time via standard shipping: 1.8 days.
PartSelect Number PS11739343
Manufacturer Part Number WP22002202
Manufactured by
Whirlpool
Product Description
Timer Specifications
The timer controls most of the operations of the washer: water level, tub filling and emptying, length of cycles, and cycle setting sequences.
How Buying OEM Parts Can Save You Time and Money
Troubleshooting
This part works with the following products:
Washer.
This part works with the following products:
Maytag.
Part# WP22002202 replaces these:
22002202
Questions and Answers
We're sorry, but our Q&A experts are temporarily unavailable.
Please check back later if you still haven't found the answer you need.
Sort by:
Search filter:
Clear Filter
Your search term must have 3 or more characters.
Keep searches simple. Use keywords, e.g. "leaking", "pump", "broken" or "fit".
Sorry, we couldn't find any existing answers that matched.Try using some different or simpler keywords, or submit your new question by using the "Ask a Question" button above!
Edda
December 2, 2017
I suspect timer problem ????? pulling knob, water will not start, nothing. but when pulling rinse, rest works. rinse cycle starts, fills, everything , is this this the correct part ??
For model number LAT8506AAE
Hello Edda, Thank you for writing. You can also try checking your water inlet valve, the lid switches, or the water pressure switch as well. Hope this helps!
1 person found this helpful.
Was this helpful?
Thank you for voting!
Customer Repair Stories
Average Repair Rating: 4.0 / 5.0, 2 reviews.
What's this?
Sort by:
Search filter:
Clear Filter
Your search term must have 3 or more characters.
Keep searches simple. Use keywords, e.g. "leaking", "pump", "broken" or "fit".
Sorry, we couldn't find any existing installation instruction that matched.
wouldn't agitate or rinse
First I removed the cap covering the timer clip then removed the 5 screws that held the cover on the back. I then pulled the element out about 3 inches and disconnected the harness and the ground wire. then reversed the above procedures. Work great!
-
David from Aurora, CO -
Difficulty Level:Really Easy -
Total Repair Time:15 - 30 mins -
Tools:Nutdriver, Pliers, Screw drivers -
4 of 6 people
found this instruction helpful.
Was this instruction helpful to you?
Thank you for voting!
The machine would fill with water at the start and then nothing would happen, heard a slight ticking sound in the timer.
Unplug the machine,
Remove screws from the top panel,
Remove cover of dial of timer,
Remove the split washer holding the dial,
Pulled the dial off,
Remove the wire plug from the back of timer,
Installed new timer.
Put it all back together.
Remove screws from the top panel,
Remove cover of dial of timer,
Remove the split washer holding the dial,
Pulled the dial off,
Remove the wire plug from the back of timer,
Installed new timer.
Put it all back together.
-
William from HUNTINGTN BCH, CA
-
Difficulty Level:Really Easy
-
Total Repair Time:30 - 60 mins
-
Tools:Screw drivers
-
Parts Used:WP22002202
1 person
found this instruction helpful.
Was this instruction helpful to you?
Thank you for voting!
Customer Reviews
Filter By Rating:
Sort by:
Search filter:
Clear Filter
Your search term must have 3 or more characters.
Keep searches simple. Use keywords, e.g. "leaking", "pump", "broken" or "fit".
Sorry, we couldn't find any existing reviews that matched. Try using some different or simpler keywords.
Linda W - June 9, 2018
Timer
Timer was easy to install. Washing machine back to normal after eighteen years of no problems. Everything great.
Model Cross Reference
This part works with the following models:
PartSelect Number: PS11739343
Manufacturer Part Number: WP22002202
Manufacturer Part Number: WP22002202
Brand
Model Number
Description