See part 42 in the diagram
( Grid squares measure 1x1 inch )
Ice Maker Cover Bracket
$7.09
In Stock
In Stock
Get this part fast. Average delivery time via standard shipping: 1.8 days.
PartSelect Number PS11739245
Manufacturer Part Number WP2198641
Manufactured by
Whirlpool
Product Description
Ice Maker Cover Bracket Specifications
This is the replacement ice maker cover bracket for your refrigerator. It is made of white plastic and is approximately 5 inches wide and 2 inches long. The ice maker cover bracket holds and supports the ice maker cover. If the ice maker cover is loose or missing, you may need to replace the bracket. You will also want to replace the bracket if it will not stay in place, or if it is cracked or broken. To replace the cover bracket, simply remove the ice maker cover, then use a ¼ inch nut driver to loosen and remove the bracket. Screw in the new bracket and replace the cover to complete your repair. This is an OEM part that is sold individually.
How Buying OEM Parts Can Save You Time and Money
Troubleshooting
This part works with the following products:
Refrigerator.
This part works with the following products:
Kenmore, KitchenAid, Whirlpool, Maytag.
Part# WP2198641 replaces these:
AP6006179, 2198641
Questions and Answers
We're sorry, but our Q&A experts are temporarily unavailable.
Please check back later if you still haven't found the answer you need.
Part Videos
Replacing your Kenmore Refrigerator Ice Maker Cover Bracket
Customer Repair Stories
Average Repair Rating: 4.4 / 5.0, 6 reviews.
What's this?
Sort by:
Search filter:
Clear Filter
Your search term must have 3 or more characters.
Keep searches simple. Use keywords, e.g. "leaking", "pump", "broken" or "fit".
Sorry, we couldn't find any existing installation instruction that matched.
broke tab on cover bracket
removed old bracket and replaced with new one - two screws and it was done - simple
-
brian from fresno, CA -
Difficulty Level:Really Easy -
Total Repair Time:Less than 15 mins -
Tools:Nutdriver -
Parts Used:WP2198641
6 of 8 people
found this instruction helpful.
Was this instruction helpful to you?
Thank you for voting!
Ice Maker cocker Bracket broken hinge
Easy repair. Remove 2 hex bolts. And remove.Install Bracket and replace 2 hex bolts and reinstall ice maker door to bracket. 10 minute repair.
-
Louis from PELHAM, NY
-
Difficulty Level:Really Easy
-
Total Repair Time:30 - 60 mins
-
Tools:
-
Parts Used:WP2198641
1 person
found this instruction helpful.
Was this instruction helpful to you?
Thank you for voting!
Replaced Ice maker cover bracket
The repair went OK, it is done. It would have been easier if a nut driver was not needed. Plus the location of the nuts was a bit difficult to manage a removal but not impossible.
-
Cheryl from FLEMINGTON, NJ
-
Difficulty Level:A Bit Difficult
-
Total Repair Time:15 - 30 mins
-
Tools:Nutdriver
-
Parts Used:WP2198641
1 person
found this instruction helpful.
Was this instruction helpful to you?
Thank you for voting!
I broke one tab tht holds to door on
unscrerwed the broke part and screwed in the new one---5 minutes
-
Charles from Everett, WA
-
Difficulty Level:Really Easy
-
Total Repair Time:Less than 15 mins
-
Tools:Socket set
-
Parts Used:WP2198641
1 of 2 people
found this instruction helpful.
Was this instruction helpful to you?
Thank you for voting!
ice maker stoped working
removed old unit, and replaced with new one found
the job to be very simple. I hand no problems.
and the unit is working fine.
the job to be very simple. I hand no problems.
and the unit is working fine.
-
Frank from Omaha, NE
-
Difficulty Level:Really Easy
-
Total Repair Time:Less than 15 mins
-
Tools:Nutdriver
-
1 of 4 people
found this instruction helpful.
Was this instruction helpful to you?
Thank you for voting!
Bracket broke
Removed screws, took out the old one and put in the new one.
-
Paul from Auburn, MA
-
Difficulty Level:Really Easy
-
Total Repair Time:Less than 15 mins
-
Tools:Screw drivers
-
Parts Used:WP2198641
0 of 2 people
found this instruction helpful.
Was this instruction helpful to you?
Thank you for voting!
Customer Reviews
Filter By Rating:
Sort by:
Search filter:
Clear Filter
Your search term must have 3 or more characters.
Keep searches simple. Use keywords, e.g. "leaking", "pump", "broken" or "fit".
Sorry, we couldn't find any existing reviews that matched. Try using some different or simpler keywords.
Gregory D - January 24, 2021
Very easy repair - worked as expected
The 4 star rating is not because of PartSelect - everything went perfectly from them, and I would give them 5 stars. The 4 stars is really for the manufacturing of the part itself - it is all plastic, and appears to me, that it is meant to break at some point. What ever happened to making parts out of aluminum that could bend and not snap? KitchenAid does this on purpose, I'm sure.
William H - March 1, 2019
Just what was needed.
Very pleased with its the part and the quick delivery.
Karen G - October 16, 2018
Excellent service
Appreciate the quick delivery of My part and the easy installation that followed.
Teresa B - June 5, 2018
Perfect
Exactly what I ordered, quick shipping.
Dan M - May 1, 2018
Excellent part, great service and fast shipping!
The right part, great sales rep on the phone, priced right and fast shipping! Would buy from again! Thanks Dan
Bradley M - February 7, 2018
Ice Maker Door
Part was exactly what I needed, inexpensive, got here quickly and installed easily. Thanks!
Model Cross Reference
This part works with the following models:
PartSelect Number: PS11739245
Manufacturer Part Number: WP2198641
Manufacturer Part Number: WP2198641
Brand
Model Number
Description