Whirlpool/Whirlpool_Thumb/UUJONWRE.gif
See part 29 in the diagram
( Grid squares measure 1x1 inch )

Get in touch, we're here to help!

Open until 12am EST

customerservice@partselect.com

Door Shelf Retainer Bar End Cap - Left Side

★★★★★
★★★★★
5 Reviews

Rated by 13 customers 

Really Easy 

Less than 15 mins 

Ratings submitted by customers like you who bought this part.

Get this part fast! Average delivery time for in-stock parts via standard shipping: 1.8 days.

 Fits your 10657051790!
 Fits your 10657051790!
PartSelect Number PS11739224
Manufacturer Part Number WP2196190
Manufactured by Whirlpool
You May Also Need?
Product Description

Door Shelf Retainer Bar End Cap - Left Side Specifications

This white door shelf retainer bar end cap is sold individually. Use it for the left side of your refrigerator door shelf retainer bar.
How Buying OEM Parts Can Save You Time and Money play video

How Buying OEM Parts Can Save You Time and Money

Troubleshooting
This part works with the following products:
Refrigerator.
This part works with the following products:
Whirlpool, Kenmore, Roper.
Part# WP2196190 replaces these:
AP6006158, 2182122, 2196190
Questions and Answers

We're sorry, but our Q&A experts are temporarily unavailable.
Please check back later if you still haven't found the answer you need.

Customer Repair Stories
 Average Repair Rating: 4.9 / 5.0, 13 reviews. What's this?
Sort by:
Sorry, we couldn't find any existing installation instruction that matched.
The ice maker was dripping into the bin and turning all the cubes into a solid block
Followed directions enclosed with new ice maker.
1. Unplugged refrigerator. Removed three screws holding ice maker with a 1/4" nut driver while supporting ice maker with free hand
2.After removing ice maker from sidewall, unplugged wire pigtail and removed entire ice maker unit
3. Installed new pigtail, and bail wire from old ice maker, onto new ice maker
4. Holding ice maker with one hand, inserted new pigtail into plug, aligned water fill tube and held unit in position to reinstall 3 screws with 1/4" nut driver
5. Set wire bail in down position, plugged refrigerator power cord back in. About an hour later had new ice cubes.
This was a much easier job than I had anticipated. Thank you PartSelect! I am a happy camper once again. This refrigerator is in my motorhome.
Other Parts Used:
Replacement Ice Maker Door Shelf Retainer Bar End Cap - Right Side
  • MACKE A from NEWPORT, OR
  • Difficulty Level:
    Really Easy
  • Total Repair Time:
    15 - 30 mins
  • Tools:
    Nutdriver, Screw drivers
18 of 25 people found this instruction helpful.
Was this instruction helpful to you?
Thank you for voting!
My refrigerator is over 10 years old. Over time a few of the door shelf end caps had broke leaving it hard to store things in the door. Recently one of the shelf support studs broke. We did an on line search and found Part Select and had replacement parts in just a few days.
My wife had the shelf end caps and trim replaced before I got home. The shelf support stud was very easy to install. A pair of pliers and a simple turn and the broke piece was out and the new one was in.
Other Parts Used:
Shelf Support Stud - White Door Shelf Retainer Bar End Cap - Right Side Door Shelf Trim
  • ROLAND from CAIRO, GA
  • Difficulty Level:
    Really Easy
  • Total Repair Time:
    Less than 15 mins
  • Tools:
    Pliers
5 of 8 people found this instruction helpful.
Was this instruction helpful to you?
Thank you for voting!
Replace two broken Door Shelf Retainer Bar End Caps
To get the broken end cap off of the retainer bar, hold the retainer bar still and pull the broken end cap straight off on a line that is parallel with the retainer bar, and with a little tugging. Might even have to tap the end cap lightly. Slide the new cap back on to the retainer bar and then put the end cap back into the door slot by putting the bottom of the end cap into the slot first by tilting the upper part back a little, then pushing down on the end cap to get it down into the slot far enough to let the upper part go in. Then adjust the end cap up slightly to cause it to snap into place.
  • CHARLES from INDIANAPOLIS, IN
  • Difficulty Level:
    Easy
  • Total Repair Time:
    15 - 30 mins
2 of 3 people found this instruction helpful.
Was this instruction helpful to you?
Thank you for voting!
The door shelf retainer bar ends snapped and broke causing the contents of the shelves to fall ended up taping them with plumbers tape
I myself unwrapped the plumbers tape I had holding the shelf and retainer bar ends together until I received the replacement part. I snapped the retainer bar into the door and yahoo, all fit and was snug and I now have two replaced working shelves. It was great! Thank you for ALL that your site did!!
  • Rochelle from Sterling, AK
  • Difficulty Level:
    Really Easy
  • Total Repair Time:
    Less than 15 mins
2 of 4 people found this instruction helpful.
Was this instruction helpful to you?
Thank you for voting!
Plastic Broken
Replaced shelf retainer end clip left side.
  • Wayne from ALBUQUERQUE, NM
  • Difficulty Level:
    Very Easy
  • Total Repair Time:
    Less than 15 mins
1 of 2 people found this instruction helpful.
Was this instruction helpful to you?
Thank you for voting!
End cap broken
Removed the old ones , this was easy because the clip part of the end cap was broken off. I simply
inserted the plastic clip part if the new end cap into the slot in the door and presto it was done.
Then I replaced the other end cap the same way
Other Parts Used:
Door Shelf Retainer Bar End Cap - Right Side
  • George from St Louis, MO
  • Difficulty Level:
    Really Easy
  • Total Repair Time:
    Less than 15 mins
1 of 3 people found this instruction helpful.
Was this instruction helpful to you?
Thank you for voting!
Replace shelves
The repair went very smooth, and fast. First I made sure I looked at markings for correct side. I snapped bottom in first and top snapped right in.
Other Parts Used:
Door Shelf Retainer Bar End Cap - Right Side Door Shelf Trim
  • sergio from edgewood, MD
  • Difficulty Level:
    Really Easy
  • Total Repair Time:
    Less than 15 mins
1 of 3 people found this instruction helpful.
Was this instruction helpful to you?
Thank you for voting!
door clips on back of end caps broken allowing shelf to move and items falling from shelf
removed owner applied "tape" and broken end caps from shelf.replAced end caps and snapped back into door slots. very simple operation but
the highlight was relative ease in finding parts at partselect. i was afraid given the age of refridgerator i would not be able to find replacement parts.once i found their website and described part it popped up in-stock and in several different colors. THANKS PARTSELECT!!
Other Parts Used:
Door Shelf Retainer Bar End Cap - Right Side
  • charles d (chad) from albertville, AL
  • Difficulty Level:
    Really Easy
  • Total Repair Time:
    Less than 15 mins
1 of 3 people found this instruction helpful.
Was this instruction helpful to you?
Thank you for voting!
minor annoyances I lived with for far too long
Haven't used the bottom door shelf of my refrigerator for years, lived with a lint filter on my hand-me-down dryer that was taped with electrical tape since the day I inherited it, and loaded and unloaded my dishwasher with irritation because of a broken clip on the bottom rack. Ordered the parts from PartSelect and got them in just 2 days. Fixed all three problems in about 15 minutes total. It's like getting new appliances...why didn't I do this sooner?
Other Parts Used:
Adjustable Peg Clip Lint Filter
  • Kimberly from Livonia, MI
  • Difficulty Level:
    Really Easy
  • Total Repair Time:
    Less than 15 mins
0 of 1 people found this instruction helpful.
Was this instruction helpful to you?
Thank you for voting!
Door Shelf Retainer Bars
This was a really simple repair, but Parts Select made it super simple. The website was really easy to use and the parts arrived very quickly. I'm glad I found this website! Thank you!
  • Paige from San Anselmo, CA
  • Difficulty Level:
    Really Easy
  • Total Repair Time:
    Less than 15 mins
0 of 1 people found this instruction helpful.
Was this instruction helpful to you?
Thank you for voting!
Customer Reviews
Average Rating:
★★★★★
★★★★★
5 Reviews
4.8
Filter By Rating:
  • 5 Stars
    4
  • 4 Stars
    1
  • 3 Stars
    0
  • 2 Stars
    0
  • 1 Star
    0
Sort by:
Sorry, we couldn't find any existing reviews that matched. Try using some different or simpler keywords.
Model Cross Reference
This part works with the following models:
PartSelect Number: PS11739224
Manufacturer Part Number: WP2196190
Brand
Model Number
Description
Kenmore
10650022000
Refrigerator
Kenmore
10650022001
Refrigerator
Kenmore
10650022002
Refrigerator
Kenmore
10650022003
Refrigerator
Kenmore
10650022004
Refrigerator
Kenmore
10650027000
Refrigerator
Kenmore
10650027001
Refrigerator
Kenmore
10650027002
Refrigerator
Kenmore
10650027003
Refrigerator
Kenmore
10650027004
Refrigerator
Kenmore
10650032000
Refrigerator
Kenmore
10650032001
Refrigerator
Kenmore
10650032002
Refrigerator
Kenmore
10650032003
Refrigerator
Kenmore
10650032004
Refrigerator
Kenmore
10650037000
Refrigerator
Kenmore
10650037001
Refrigerator
Kenmore
10650037002
Refrigerator
Kenmore
10650037003
Refrigerator
Kenmore
10650037004
Refrigerator
Kenmore
10651051990
Refrigerator
Kenmore
10657051790
Refrigerator
Kenmore
10657051791
Refrigerator
Kenmore
10657051792
Refrigerator
Kenmore
10657058790
Refrigerator
Kenmore
10657058791
Refrigerator
Kenmore
10657058792
Refrigerator
Kenmore
10659021990
Refrigerator
Kenmore
10659021991
Refrigerator
Kenmore
10659021992
Refrigerator

Get in touch, we're here to help!

Open until 1am EST

Contact Customer Service