Maytag/Maytag_Thumb/MI3UZPVB.gif
See part 24 in the diagram
Replacing your Kenmore Refrigerator Ice Maker Water Fill Tube Kit play video
( Grid squares measure 1x1 inch )

Get in touch, we're here to help!

Open until 12am EST

customerservice@partselect.com

Ice Maker Water Fill Tube Kit

★★★★★
★★★★★
21 Reviews

Rated by 34 customers 

Really Easy 

15 - 30 mins 

Ratings submitted by customers like you who bought this part.

Get this part fast! Average delivery time for in-stock parts via standard shipping: 1.8 days.

 Fits your 10631414200!
 Fits your 10631414200!
PartSelect Number PS11739222
Manufacturer Part Number WP2196157
Manufactured by Whirlpool
Product Description

Ice Maker Water Fill Tube Kit Specifications

The icemaker water fill tube provides water to the icemaker so it can produce ice and dispense water. If you notice that your ice maker is not making or dispensing ice, or is leaking, you may need to replace the water fill tube. This water fill tube kit comes with a fill tube and a compression nut. This part is made of white plastic and is approximately 10 inches in length. The ice maker water fill tube is in the rear of the fridge. To complete this repair, you will need a 1/4 inch nut driver and a utility knife. Before beginning this repair, you may want to disconnect the water and power supply to the refrigerator.
How Buying OEM Parts Can Save You Time and Money play video

How Buying OEM Parts Can Save You Time and Money

Troubleshooting
This part fixes the following symptoms:
Leaking | Ice maker not making ice | Not dispensing water | Ice maker won’t dispense ice
This part works with the following products:
Refrigerator, Ice Maker, Freezer, Wine and Beverage Cooler.
This part works with the following products:
Kenmore, Whirlpool, KitchenAid, Roper.
Part# WP2196157 replaces these:
AP6006156, 1112845, 2154070, 2154080, 2154081, 2174759, 2174760, 2182015, 2196035, 2196157, 836489, 841907, 842896, 848725, 849908, 983655, 983990, W10281566
Questions and Answers

Ask our experts a question about this part and we'll get back to you as soon as possible!

10 questions answered by our experts.
Sort by:
Sorry, we couldn't find any existing answers that matched.Try using some different or simpler keywords, or submit your new question by using the "Ask a Question" button above!
Donald
August 16, 2017
My ice maker is not getting water to the tube at the top inside of the freezer.
For model number ED22TEXHW02
Hi Donald, Thank you for your inquiry. I would suggest checking your fill tube to see if there is any ice blockage preventing water getting to your ice maker. The second thing that I would suggest you look into is your water inlet valve. Test both of the solenoids on that part with a multi-meter to see if they are working correctly. Good luck with your repair.

9 people found this helpful.

Was this helpful?
Thank you for voting!
Bobbi
September 24, 2019
I have replaced the water inlet valve, and cleaned water lines and ice maker thoroughly but i am still not getting any water to the ice maker. The ice maker goes through the process but water gets to it. What could be the problem ?
For model number TT14DKXKQ03
Hello Bobbi, Thank you for the question. If the valve was not the issue and the lines are clear and it is still not filling, this normally means the ice maker is defective and will need to be replaced. Hope this helps!

3 people found this helpful.

Was this helpful?
Thank you for voting!
John
February 23, 2018
The ice cubes taste funny. Is there anything in the ice maker that can cause that? I have an external water filter and it's been replaced and later bypassed and i still have the same problem. The ice cubes are normal size and everything else seems to function normally.
For model number ET22DKXAN02
Hi John, Thank you for your question. Ice cubes that taste funny can be caused by food containers left open or by food that has spilled inside the refrigerator. If the ice has been sitting in the refrigerator and it has not been used, it will absorb food odors. You may also have a bad water supply that is causing the ice cubes to taste funny. I hope this helps. Thank you and have a great day!

1 person found this helpful.

Was this helpful?
Thank you for voting!
Mike
March 24, 2018
Our ice maker quit working so we ordered part number w10130935. When we took out the maker we saw the fill tube inside the freezer was frozen solid. So we installed the new motor module thinking maybe the system has a way to melt that ice but found after 10 hours it did not thaw. We are wondering why would that fill tube freeze solid, what would cause that and what should we check to fix this problem? The water line? Can you give some pointers?
For model number ET20DMXAW00
Hello Mike, Thanks for your question. This type of issue typically arises from a leak or problem with the water inlet valve. You may want to examine the solenoid and test it with a multimeter for electrical continuity - replace it if it shows no continuity. I hope this helps.

1 person found this helpful.

Was this helpful?
Thank you for voting!
Related Parts:
Joanne
January 31, 2020
Water is leaking in the ice bin after ice is dispensed, what part do i need to fix this problem?
For model number ED26SSXLWR0
Hello JoAnne, Thank you for your question. Our sources suggest replacing the ice maker water fill tube kit under part PS11739222 for your model to fix the leaking. We hope this helps.

1 person found this helpful.

Was this helpful?
Thank you for voting!
Sahana
July 6, 2021
Hello, Water is not dispensed, but the ice dispenses fine. What could be the problem? I see cold water coming out at the back of the refrigerator, but there is no water in the bottom front tubing behind the filter cover. Should i expect water to be flowing in the front tubing all the time or does it get water there only when the water switch is triggered?Thanks for your help. sahana
For model number 10657282791
Hi Sahana, Thank you for your question. If your refrigerator is not dispensing water, there are some parts that you will need to check to see which one is causing the issue. You will need to check control bracket, the micro switch and the nozzle and tube. We hope this helps! Good luck with the repair!

Was this helpful?
Thank you for voting!
Related Parts:
Bobbi
September 24, 2019
Is there a way to test the ice maker ? Does the ice maker tell the inlet valve to send water?
For model number ESTATE TT14DKXKQ03
Hello Bobbi thank you for writing . Yes it does , there are test you can do for the water inlet Remove the water inlet valve from the refrigerator. Disconnect your fill line from your water valve Remove any wire harness or harnesses from your water valve. Push down on the tabs and remove the hoses. Once you remove the water valve, be sure to check the screen for any debris or blockage. Grab a multi-meter and set it to the lowest Ohms of resistance for your part. If you have any analog meter, touching the two metal probes together will zero out. To test your valve, touch one probe to each terminal. Depending on the part, your part can read between 200 and 500 Ohms. Note: If you have a fridge with both an ice maker and water dispenser, your Ohms of resistance may be higher. If your valve didn't reach those levels it probably needs to be replaced. Hope this helps. Contact us anytime.

Was this helpful?
Thank you for voting!
Billy
November 16, 2021
The plastic line from the water pump outlet to the water fill tube for the ice maker became disconnected, possibly broken. I tried to re-insert the water line back into the ice maker water fill tube, but it isn't a secure fit and still leaks a lot. I was going to order the Ice Maker Water Fill Tube Kit Part Number: PS11739222 to try and fix this problem. But was wondering if it might be the plastic water line to the freezer ice maker?
For model number AFD2535DES
Hello Billy, Thank you for contacting us. We recommend replacing both parts together. We have researched the model you have provided and have found the part you are looking for is Part #: PS11747816. If you need help placing an order, customer service is open 7 days a week. Please feel free to give us a call. We look forward to hearing from you!

Was this helpful?
Thank you for voting!
Related Parts:
Pat
September 15, 2022
Water leaking from bottom of vents or gray center part in base of freezer - ice maker working. Sheet of ice forms on base floor of freezer Lowered temp in refrig - freezer n refrig working fine!
For model number WRT771RWYM01
Hello Pat, thank you for your question. We have researched your model and found that the issue is probably with the Drain Tube, part number PS12711022. If you require assistance to place an order, please contact customer service. We hope that helps!

Was this helpful?
Thank you for voting!
Related Parts:
Robert
17 days ago
We've had slow water from the dispenser a long time, now the water not going to ice maker. What parts should I be looking to replace.
For model number ed22pw
Hello Robert, Thank you for your inquiry. It sounds like an issue with the water inlet valve dispenser solenoid, and you will need to replace the entire water inlet valve. You can test it beforehand with a multimeter. If you are unfamiliar with how a multimeter functions, we have videos available to assist you. Good luck with your repair.
play video

Was this helpful?
Thank you for voting!
Related Parts:
Part Videos

Replacing your Kenmore Refrigerator Ice Maker Water Fill Tube Kit

Replacing your Kenmore Refrigerator Ice Maker Water Fill Tube Kit play video
Customer Repair Stories
 Average Repair Rating: 4.2 / 5.0, 34 reviews. What's this?
Sort by:
Sorry, we couldn't find any existing installation instruction that matched.
Broken elbow on icemaker water fill tube.
Removed 2 screws holding water fill tube to rear of refrigerator and pulled out, matched old part with new to make sure of proper match. Guide new fill tube thru hole, making sure it is aligned with slot in ice cube tray on inside of freezer. Install new plastic line from water pump outlet to water fill tube, check for leaks, job done.
  • Charles from Orland Hills, IL
  • Difficulty Level:
    Really Easy
  • Total Repair Time:
    Less than 15 mins
  • Tools:
    Nutdriver
130 of 141 people found this instruction helpful.
Was this instruction helpful to you?
Thank you for voting!
water in the door despencer stopped working and did not make ice
first thing i did was to turn off the water supply line to the frig,then pulled it away from the wall and removed the cardboard backing at the bottom of the frig.
then i loosened the nut on the supply line to the fill valve removed the two screwsholding in the fill valve,un hooked the two electrical plugs.[i had allready disconected the electric when i pulled the frig out]then i un hooked the other two water line conected to the fill valve,replaced the valve with the new one rehooked everything . the ice machine tube was only a matter of loosining up the nut on the tub takeing off the two nuts on the back of the frig the just pull out the old tude install the new one rehook the water line ,turn the water back on check for leaks get all the air out of the line by using the water despencer in the door and your good to go .
Other Parts Used:
Ice Maker and Water Dispenser Dual Inlet Valve
  • Don from BALTIMORE, MD
  • Difficulty Level:
    Really Easy
  • Total Repair Time:
    Less than 15 mins
  • Tools:
    Screw drivers, Wrench (Adjustable)
27 of 34 people found this instruction helpful.
Was this instruction helpful to you?
Thank you for voting!
The Ice maker would not work.
We rolled the refrigerator out away from the wall and it was obvious where the break was located. We took out the old water spout for the ice maker and replaced the tube and the tubing from the solenoid. We turned it on and soon we had water dripping everywhere. We unloaded and defrosted the freezer which got all of the remaining ice that was stuck in there. We put everything back together. I read in some instructions in the manual that it might take 24 hours for the ice maker to reprogram itself and start producing ice. I was only about 12 hours and we had ice again and everything worked well. You really do not have to disconnect the water from the main line, the solinoid controls that part of operation and turns the water off until the ice trays are free and clear.

JLB
Other Parts Used:
Water Tube Kit
  • Jerry from Boulder, CO
  • Difficulty Level:
    Easy
  • Total Repair Time:
    1- 2 hours
  • Tools:
    Screw drivers
22 of 42 people found this instruction helpful.
Was this instruction helpful to you?
Thank you for voting!
ice maker was leaking water
Parts went right into place as the pictures showed and was working again in about 30 minutes. The only thing that wasn't working was the ice took forever to make, but solved that problem by turning up the temp in the freezer.
Other Parts Used:
Plastic Tubing Inserts - 4 Included Ice Maker Fill Tube Gasket
  • Sandra from Temecula, CA
  • Difficulty Level:
    Really Easy
  • Total Repair Time:
    15 - 30 mins
  • Tools:
    Screw drivers
13 of 22 people found this instruction helpful.
Was this instruction helpful to you?
Thank you for voting!
The refrigerator leaked water every time the ice maker filled.
The problem was discovered to be a cracked fill tube head, This part extends behind the refigerator and is VERY vulnerable to breakage when the box is pushed backagainst a wall space! Placing a shim under the vertical part of the fill tube fixed the problem even without replacing it with the new part. So, now I have a spare!
  • Robert E. from Darien, IL
  • Difficulty Level:
    A Bit Difficult
  • Total Repair Time:
    Less than 15 mins
11 of 16 people found this instruction helpful.
Was this instruction helpful to you?
Thank you for voting!
Ice maker fill tube broken
The repair I performed was so simple it doesn't merrit mentioning. What I was really impressed with is finding a source this easy and user friendly (even though they didn't have the dishwasher soap dispenser I needed). The parts were easy to find on your site and because of your simple methods of finding and describing your parts I was able to buy a markedly better filter at a cheaper price than my usual source. They may have the same part but because they are oriented to showing you only the specific part you request rather than showing you all options, like your site, I wound never have known that filter existed. Thank you for a good resource.
Other Parts Used:
Water Filter Rinse Aid Dispenser Cap
  • Robert from Annapolis, MD
  • Difficulty Level:
    Really Easy
  • Total Repair Time:
    Less than 15 mins
  • Tools:
    Screw drivers
10 of 15 people found this instruction helpful.
Was this instruction helpful to you?
Thank you for voting!
Broken gooseneck on fill tube
The gooseneck on the icemaker fill tube extends out beyond the back cabinet of the refrigerator, and is easily broken. Luckily, this part is a piece of cake to replace. You'll literally spend more time pulling out your fridge and cleaning out behind it then you will replacing this part.

Shut off water supply line, and turn off ice maker (lift the metal bar in the ice bucket all the way up). Loosen the hose fitting, and remove two screws. Pull out the old tube, and slide the new one in. You may have to wiggle the tube around from the inside to get the alignment correct. Replace screws and fitting. Turn water and ice maker back on, and check for leaks. It really is that easy! It took me longer to type this than to actually replace the part.

Only one potential catch. The instructions warn that you may have to cut the new tube to match the length of the old tube, so make sure you compare the length of the old and new tube. I didn't have to to do anything - the replacement part was the exact same length of the original. If by chance you do need to cut the tube, you'll need small saw of some sort, such as a coping or hack saw.
  • Thomas from Brunswick, OH
  • Difficulty Level:
    Really Easy
  • Total Repair Time:
    15 - 30 mins
  • Tools:
    Screw drivers
10 of 11 people found this instruction helpful.
Was this instruction helpful to you?
Thank you for voting!
ice maker leaking or overflowing into ice bend
first bought new ice maker installed it-didn`t fix the problem. next bought fill tube kit and dual outlet vale -installed those ice maker works GREAT no leaks -no ice froze together in bend. thanks for the help GUYS.
Other Parts Used:
Dual Outlet Valve Kit
  • LARRY from DYER, TN
  • Difficulty Level:
    Easy
  • Total Repair Time:
    30 - 60 mins
  • Tools:
    Nutdriver, Pliers, Screw drivers, Wrench set
9 of 13 people found this instruction helpful.
Was this instruction helpful to you?
Thank you for voting!
Ice maker was over flowing with water and freezing in freezer
I first ordered the wrong part number and received a 2 way valve, but after talking to customer service they provided me with the correct part number for the correct 3 way valve and gave me an RMA to return the wrong part. I disconnected the power and turned off the water and removed the old valve. The new water inlet valve had slightly different water tubing self compression connections, so I had to cut off the old tube nuts with a pair of dikes on my existing tubing and simply push the trimmed tubing all the way into the new valve connection ports. After connecting the new water inlet valve, I checked for leaks and found none. I also had to remove my internal ice maker to remove all of the frozen ice. After reinstalling, the next day my ice maker was making ice again. In the mean time I had also ordered a new ice maker, which I probably do not need now. I can't decide whether to keep it for a spare or to request an RMA.
Other Parts Used:
Ice Maker and Water Dispenser Dual Inlet Valve
  • Theodore from Broken Arrow, OK
  • Difficulty Level:
    A Bit Difficult
  • Total Repair Time:
    More than 2 hours
  • Tools:
    Screw drivers, Socket set
4 of 4 people found this instruction helpful.
Was this instruction helpful to you?
Thank you for voting!
Filler tube broken and old tube frozen over
this is a snap! 2 screws an a nut to tighten and it works like a charm. the filler tube in my Kenmore refer had broken off in the back. ( really bad location to put this in the beginning) if you push the refer to close to the wall you can break it off easily. remove the water line by loosing the nut and remove the hose from the fill tube ( This assumes you have already turned of the water supply or you are standing in a large puddle)remove the 2 screws that hold the filler tube in place. pull out the old filler tube in and slightly upright motion. replace the new fill tube into the same hole and replace the screws. replace the hose and tighten the nut, turn the water back on and check for leaks your done !!
doesn't that feel great?
  • Alan from Chino, CA
  • Difficulty Level:
    Really Easy
  • Total Repair Time:
    Less than 15 mins
  • Tools:
    Nutdriver, Pliers, Screw drivers
4 of 5 people found this instruction helpful.
Was this instruction helpful to you?
Thank you for voting!
Customer Reviews
Average Rating:
★★★★★
★★★★★
21 Reviews
4.5
Filter By Rating:
  • 5 Stars
    15
  • 4 Stars
    4
  • 3 Stars
    1
  • 2 Stars
    0
  • 1 Star
    1
Sort by:
Sorry, we couldn't find any existing reviews that matched. Try using some different or simpler keywords.
Model Cross Reference
This part works with the following models:
PartSelect Number: PS11739222
Manufacturer Part Number: WP2196157
Brand
Model Number
Description
Kenmore
106106-8130600
Refrigerator
Kenmore
106106-8130610
Refrigerator
Kenmore
106106-8130620
Refrigerator
Kenmore
106106-8130630
Refrigerator
Kenmore
106106-8130640
Refrigerator
Kenmore
106106-8130650
Refrigerator
Kenmore
106106-8130660
Refrigerator
Kenmore
106106-8130680
Refrigerator
Kenmore
106106-8130690
Refrigerator
Kenmore
1061068130670
Refrigerator
Kenmore
10631400200
Refrigerator
Kenmore
10631402200
Refrigerator
Kenmore
10631404200
Refrigerator
Kenmore
10631409200
Refrigerator
Kenmore
10631410200
Refrigerator
Kenmore
10631412200
Refrigerator
Kenmore
10631414200
Refrigerator
Kenmore
10631419200
Refrigerator
Kenmore
10639420990
Refrigerator
Kenmore
10639422990
Refrigerator
Kenmore
10639424990
Refrigerator
Kenmore
10639427990
Refrigerator
Kenmore
10639430990
Refrigerator
Kenmore
10639432990
Refrigerator
Kenmore
10639434990
Refrigerator
Kenmore
10639437990
Refrigerator
Kenmore
10647021790
Refrigerator
Kenmore
10647021791
Refrigerator
Kenmore
10647022790
Refrigerator
Kenmore
10647022791
Refrigerator

Get in touch, we're here to help!

Open until 1am EST

Contact Customer Service