Refrigerator Crisper Drawer with Humidity Control Specifications
The crisper drawer (Crisper Pan, Refrigerator Crisper Drawer) with humidity control is meant to keep your vegetables and fruit as fresh as possible by allowing you to regulate the humidity levels within the drawer. It attaches on the inside of your refrigerator to the bottom of the crisper shelf. This drawer can break from misuse or accidental damage. It is also subject to material fatigue over time. If broken or damaged, it may be difficult to slide the drawer in and out, and it should be replaced. This plastic drawer measures 14.92 inches long, 7.6 inches high, and 16.5 inches wide and comes in white/clear.
broken meat drawer and glass shelf,ordered humidity control drawer and shelf
Diagram is not clear, meat drawer is designed to fit on bottom of shelves and humidity control crisper drawer is intended for next level up, after realizing the proper arrangement it was a relatively easy, however after first trying the crisper at the lower level it was not easy to recognize the proper locatiom
The original drawer had chipped along the glides and would not close properly
The refrigerator had to be pulled away from the wall far enough to permit the door to open fully, but no tools were needed and no difficulty was encountered. Removed the old drawer and discarded it. Inserted the new drawer and closed the humidifier vent. Pushed the refrigerator back in place. Job done.
Donald from SENECA, SC
Difficulty Level:
Very Easy
Total Repair Time:
Less than 15 mins
3 of 5 peoplefound this instruction helpful.
Was this instruction helpful to you?
Thank you for voting!
crisper drawer side slide broke off
bought a new crisper drawer
Ramon from LAWRENCE, MA
Difficulty Level:
Really Easy
Total Repair Time:
Less than 15 mins
5 of 7 peoplefound this instruction helpful.
Was this instruction helpful to you?
Thank you for voting!
< Prev
1
2
3
Next >
Questions and Answers
Ask our experts a question about this part and we'll get back to you as soon as possible!
129 questions answered by our experts.
Sort by:
< Prev
1
2
3
Next >
Search filter:
Clear Filter
Your search term must have 3 or more characters.
Keep searches simple. Use keywords, e.g. "leaking", "pump", "broken" or "fit".
Sorry, we couldn't find any existing answers that matched.Try using some different or simpler keywords, or submit your new question by using the "Ask a Question" button above!
Anthony
July 20, 2017
I cannot tell if this is the right drawer for my fridge. I am looking for a humidity drawer that is about 14 inches long and 16.5 wide and 8 inches deep. What are the measurements
Hi Anthony, great question. Based on the information provided by the manufacturer this part is 14.92 inches long, 7.6 inches high, and 16.5 inches wide. I hope this helps!
80 people found this helpful.
Was this helpful?
Thank you for voting!
Regina
July 20, 2017
Your website led me here to replace my broken drawer. But in the picture your part says Humidity Control and mine says Produce Saver. Is this really the part I need? TIA
Hello Regina, this is the right drawer/bin WP2188656 that you’re looking for and it is a replacement part sourced directly from the manufacturer. Occasionally this will happen where it will not match your drawer word for word. However, it will fit in your fridge and will work just the same as the part it is replacing. I hope this clears things up for you!
32 people found this helpful.
Was this helpful?
Thank you for voting!
Shauna
July 20, 2017
Can you confirm this is the part I need for my fridge? The bottom of my crisper drawer is cracked and needs replacing. With that said my fridge is a different brand than the manual, and the drawer is a different brand than both the manual and the fridge. Is that normal?
Hello Shauna, thanks for the question! This can get a little confusing sometimes because the unit was built by Whirlpool but it is branded as a Kenmore, and yes this is a common occurrence. Rest assured that this is the correct crisper pan WP2188656 for your model, and it is an OEM replacement part. Please let us know if you have any further questions.
21 people found this helpful.
Was this helpful?
Thank you for voting!
Dao
January 9, 2019
I need to replace my crispier pan because both side is cracked. Is this the right part for my model?
For model number ED5FHAXSQ00
Hello Dao, Thank you for contacting us. I have researched the model you have provided and have found the part you are looking for is Part Number: PS11739122 for the bottom Pan, Part Number: PS11739119 for the middle Humidity Control Drawer and Part Number: PS869293 for the smaller Snack Drawer. Thank you for your inquiry, good luck with this repair!
This is a refrigerator i bought in 2001...the part i need is a left sided crisper drawer/bin with a slanting back....the pull out handle section has a piece broken off leaving a rather Sharp edge on the pull piece... i do not have the part # on the crisper/bin/drawer thank you
For model number ROPER 125204 RT18AKXJW
Hello Sondra, thank you for your question. The left side crisper drawer that slants on the back is part number Crisper Drawer Part Number: PS11731260. Please enter the part number into the site for current price and availability. Good luck with your repair!
7 people found this helpful.
Was this helpful?
Thank you for voting!
Barb
October 22, 2017
I need to replace my humidity drawer and also need the humidity control housing and slider. Does the drawer come with the housing and the slider?
Hi Barb,
Thank you for your inquiry. Yes, this drawer has the humidity control. I hope this helps. Thank you and have a great day!
7 people found this helpful.
Was this helpful?
Thank you for voting!
Katy
November 12, 2017
I need to replace the humidifier drawer in my 2015 Whirlpool refrigerator. The back wall of the drawer is on an angle. The drawer shown for this model number has a straight back. Will the replacement drawer still fit? Thank you, katy
For model number WRS322FDAW04
Hi Katy,
Thank you for your question. The crisper drawer with humidity control that is listed under your model number does have a slanted back to it and it will fit in your refrigerator. I hope this helps. Thank you and have a great day!
7 people found this helpful.
Was this helpful?
Thank you for voting!
Ben
May 13, 2019
Where can i find the water filter on this model Whirlpool frig. The filter lite turns yellow and i have reset it to turn Green. It will need replacing soon. Thanks ben
For model number ed5pvexws08
Hello Ben, thank you for inquiring. For your model the replacement Water Filter is part PS11722128. It is located at the bottom left of the fridge behind the Kickplate Grille.
6 people found this helpful.
Was this helpful?
Thank you for voting!
Dave
November 19, 2017
Is this drawer the correct one for a Maytag msd2559xem04?
For model number Maytag MSD2559XEM04
Hello Dave, Thank you for contacting us. I have researched the model you have provided and have found the part you’re looking for is Part Number: PS11749661. Hope this helps!
5 people found this helpful.
Was this helpful?
Thank you for voting!
Mary
November 9, 2019
The crisper drawer that is shown is not the size i need for my refrigerator
For model number WRF989SDAM
Hello Mary, thank you for your question. The two crisper drawers that sit side by side in the fridge is PS11728127. Please enter the part number into the site for current price and availability. Good luck with your repair!
4 people found this helpful.
Was this helpful?
Thank you for voting!
< Prev
1
2
3
Next >
✖
Ask a Question
Ask our experts a question on this part and we'll respond as soon as we can.
