Part Location Diagram of WP2188242 Whirlpool Ice Dispenser Kit Motor - 120V 60Hz
See part 2 in the diagram
Replacing your Whirlpool Refrigerator Ice Dispenser Kit Motor - 120V 60Hz
( Grid squares measure 1x1 inch )
Customer Service Representative

Get in touch, we're here to help!

Open until 12am EST

customerservice@partselect.com

Ice Dispenser Kit Motor - 120V 60Hz WP2188242

 Fits your ED5LHEXTD00!

Rated by 4 customers 

Easy 

1- 2 hours 

Ratings submitted by customers like you who bought this part.

$ 258.98
  In Stock
Electrolux Family Store
Get
up to
40%
off a new
appliance

Sign up for the Electrolux Family Store and receive exclusive savings on Frigidaire and Electrolux.

Get this part fast! Average delivery time for in-stock parts via standard shipping: 1.8 days.

 Fits your ED5LHEXTD00!
PartSelect Number PS11739113
Manufacturer Part Number WP2188242
Manufactured by Whirlpool
Customer Service Representative

Get in touch, we're here to help!

Open until 12am EST

customerservice@partselect.com

Check if this fits your product and find model diagrams

Need help finding your model number?
Product Description

Ice Dispenser Kit Motor - 120V 60Hz Specifications

This motor rotates the auger. When the auger rotates, it pushes ice out of the bin, through a chute to the user.
How Buying OEM Parts Can Save You Time and Money

How Buying OEM Parts Can Save You Time and Money

Part Videos

Replacing your Whirlpool Refrigerator Ice Dispenser Kit Motor - 120V 60Hz

Replacing your Whirlpool Refrigerator Ice Dispenser Kit Motor - 120V 60Hz
Troubleshooting
This part fixes the following symptoms:
Ice maker won’t dispense ice
This part works with the following products:
Refrigerator.
This part works with the following products:
Whirlpool, Kenmore, KitchenAid, Estate.
Part# WP2188242 replaces these:
AP6006049, 1119024, 2152109, 2152118, 2155263, 2188242, 2188385
Back to Top
Customer Repair Stories
 Average Repair Rating: 2.8 / 5.0, 4 reviews. What's this?
  • 1
Sort by:
Sorry, we couldn't find any existing installation instruction that matched.
Was not dispensing ice, motor shaft had broken
Once the part arrived it would have been an extremely simple install, however the part was shipped defective. Only 1 of the six potential mounting holes had been tapped. Leaving 5 without threading whatsoever. After demanding a refund I was told I would have to pay for shipping again to send it back and it would talk 7 to 20 weeks ........ yes you read that correctly. For my return to be processed and I could be issued my refund. Long story short I tapped the holes myself and was then able to install. Everything works but I will never buy ANYTHING from this website again.
Other Parts Used:
Ice Dispenser Motor Coupling
  • Sean from COVENTRY, RI
  • Difficulty Level:
    Really Easy
  • Total Repair Time:
    15 - 30 mins
  • Tools:
    Nutdriver, Screw drivers
1 person found this instruction helpful.
Was this instruction helpful to you?
Thank you for voting!
Ice maker would not dispense ice
1. Removed Ice cube bin. 2. Removed the 4 screws holding dispenser bracket in place. 3.Unplugged electrical connector for motor and removed the unit. 4. Removed the coupler,wiring connections and three screws holding dispenser motor to mounting bracket. 5.Installed new dispenser motor onto bracket, put on coupler and connected wiring to motor. 6. Installed newly assembled unit put ice bin back into place. Dispenser works great.
  • William from Victorville, CA
  • Difficulty Level:
    Easy
  • Total Repair Time:
    15 - 30 mins
  • Tools:
    Nutdriver
20 of 25 people found this instruction helpful.
Was this instruction helpful to you?
Thank you for voting!
Ice Dispenser won't eject ice cubes
I assumed the motor had burned out. I removed the 4 hex-head screws to remove the bracket holding the motor. I had to squeeze the electrical fitting to the motor located in the right rear of the compartment in order to electrically disconnect the motor, since the lower part of the fitting has a latch that prevents its easy removal. Then I could insert a vice grips on the shaft and on the coupling in order to (reverse) unscrew the coupling from the motor. I initially received the wrong replacement motor, but when the correct one arrived, it installed on the mounting bracket easily and I reinstalled the bracket with motor easily. It turns out a new motor did NOT fix the problem, so I'm not sure what to do now.
Other Parts Used:
Ice Dispenser Motor Coupling
  • Richard from Lynchburg, VA
  • Difficulty Level:
    Really Easy
  • Total Repair Time:
    More than 2 hours
  • Tools:
    Pliers, Screw drivers, Socket set
32 of 45 people found this instruction helpful.
Was this instruction helpful to you?
Thank you for voting!
Ice Maker would not eject the Ice either by cube or crushed
removed the Ice Tray, removed the cover that the motor is attached to, The biggest problem I had was getting the coupler off the drive shaft. It would not tightyen up and would not turn auger. I had to remove the unit and take a hack saw to cut the coupler off
The other problem I could not get the wireing harness unpluged from the refigrator, and had to remove each individual wire from its contact. I had to remove the whole motor unit inorder to get the old coupler off.
Other Parts Used:
Ice Dispenser Motor Coupling
  • Jack from College Station, TX
  • Difficulty Level:
    A Bit Difficult
  • Total Repair Time:
    More than 2 hours
  • Tools:
    Screw drivers
69 of 96 people found this instruction helpful.
Was this instruction helpful to you?
Thank you for voting!
  • 1
Questions and Answers

We're sorry, but our Q&A experts are temporarily unavailable.
Please check back later if you still haven't found the answer you need.

5 questions answered by our experts.
  • 1
Sort by:
Sorry, we couldn't find any existing answers that matched.Try using some different or simpler keywords, or submit your new question by using the "Ask a Question" button above!
David
October 28, 2017
Cannot get auger to turn on its own.Can turn by hand after i melted all ice around it.Can then unit by hand ,but when put back together, does not work. Can't even hear motor running to turn auger. Should i replace the auger motor?
For model number 10656724602
PartSelect logo
Hi David, Thank you for your inquiry. If the motor is not running then I would replace it. I hope this helps. Thank you and have a great day!

4 people found this helpful.

Was this helpful?
Thank you for voting!
Dona
September 9, 2019
I am trying to find instructions to replace the ice chute motor
For model number KSCSF25FTSS02
PartSelect logo
Hi Dona, thank you for your question. There is an installation video listed above in the part information. Here is the link: https://youtu.be/J5O1QfQIxtQ. Good luck with your repair.

2 people found this helpful.

Was this helpful?
Thank you for voting!
Tom
December 10, 2018
The icemaker makes a very loud noise intermittently i disconnected and removed auger from freezer compartment noise stopped. Question is likely cause is solenoid or motor. Ice maker works.
For model number ed5fhexnq00
PartSelect logo
Hi Tom, Thank you for your question. The sound you are hearing is likely the auger motor and you will need to replace it. I hope this helps. Thank you and have a great day!

1 person found this helpful.

Was this helpful?
Thank you for voting!
Micky
January 2, 2018
No ice delivery: - how do i determine if it is the motor or the solenoid; the auger does move by hand but i hear no noise when i try the dispenser. Also the water does not dispense but the ice maker does make ice. Water valve solenoid? 2-problems, thank you
For model number KSBS25FKBL00
PartSelect logo
Hi Micky, Thank you for your question. To verify which part is causing the issue you will need to use a multimeter to check the continuity of each part. I hope this helps. Thank you and have a great day!

Was this helpful?
Thank you for voting!
John
April 7, 2023
Ice maker makes ice infrequently and solid ice forms under the cylinder and in the shallow trough in the ice container. It dispenses ice when the solid ice under the cylinder is not binding and the water dispenser seem to be working fine. What parts might need to be replace to fix these ice maker problems. Thanks, John
For model number GD25DFXFW02
PartSelect logo
Hello John, Thank you for asking. We suggest testing the Water Inlet Valve. Set your multitester to the R X 1 ohms setting to test for continuity. Place each of the multitester's leads on a terminal. Your multitester should display a reading between 200 and 500 ohms. Closely examine your water inlet valve. The exact ohm resistance rating you should test for may be marked on the valve. We hope this helps!

Was this helpful?
Thank you for voting!
Related Parts:
  • 1
You May Also Need?
Model Cross Reference
This part works with the following models:
PartSelect Number: PS11739113
Manufacturer Part Number: WP2188242
Brand
Model Number
Description
Kenmore
10650022000
Refrigerator
Kenmore
10650022001
Refrigerator
Kenmore
10650022002
Refrigerator
Kenmore
10650022003
Refrigerator
Kenmore
10650022004
Refrigerator
Kenmore
10650027000
Refrigerator
Kenmore
10650027001
Refrigerator
Kenmore
10650027002
Refrigerator
Kenmore
10650027003
Refrigerator
Kenmore
10650027004
Refrigerator
Kenmore
10650032000
Refrigerator
Kenmore
10650032001
Refrigerator
Kenmore
10650032002
Refrigerator
Kenmore
10650032003
Refrigerator
Kenmore
10650032004
Refrigerator
Kenmore
10650037000
Refrigerator
Kenmore
10650037001
Refrigerator
Kenmore
10650037002
Refrigerator
Kenmore
10650037003
Refrigerator
Kenmore
10650037004
Refrigerator
Kenmore
10650202990
Refrigerator
Kenmore
10650202991
Refrigerator
Kenmore
10650202992
Refrigerator
Kenmore
10650202993
Refrigerator
Kenmore
10650203990
Refrigerator
Kenmore
10650203991
Refrigerator
Kenmore
10650203992
Refrigerator
Kenmore
10650203993
Refrigerator
Kenmore
10650204990
Refrigerator
Kenmore
10650204991
Refrigerator
Customer Service Representative

Get in touch, we're here to help!

Open until 1am EST

Contact Customer Service