Quick Question!

Have you ever purchased from PartSelect.com before?

11739060-1-S-Whirlpool-WP2183787W-Dispenser Grille
11739060-1-S-Whirlpool-WP2183787W-Dispenser Grille 11739060-2-S-Whirlpool-WP2183787W-Dispenser Grille 11739060-3-S-Whirlpool-WP2183787W-Dispenser Grille https://www.partselect.com/Schematics/Whirlpool/DNJN3B8E.gif

Dispenser Grille

Your Price

$25.34
Get this part fast. Average delivery time via standard shipping: 1.8 days.

PartSelect Number PS11739060
Manufacturer Part Number WP2183787W
Manufactured by Whirlpool

This white overflow grille is located on the bottom of the ice/water dispenser.

This part works with the following brands: Kenmore, Whirlpool, Roper, Crosley, Estate.

This part works with the following products: Refrigerator.

Questions & Answers

Ask our experts a question on this part and we'll respond as soon as we can.

Installation Instructions Provided by PartSelect customers like you.

Average Repair Rating: 3.8 / 5.0, 6 reviews What's this?
1-6 of 6
 

48 of 64 people found this instruction helpful

Parts Used:
Level of Difficulty: Easy
Time to do repair: 15 - 30 mins
Tools: Nutdriver, Screw drivers
Customer: Mario from Oklahoma City, OK

Replacing still working but old and stained levers

The overflow grille was no problem. It just slides out. To get to the levers, you need to remove the front cover trim. Pay attention to where everything is before you remove parts and how the wiring is set up (over or under parts). There are two slots below the trim, use your blade screw driver and pop the trim. You'll notice that the 4 buttons for ice (crush - cube) and the light (off-on) are on that panel. I don't recall well, but I believe two screws (one at each side) hold that part in place. Once loose, I flipped it up, disconnected the white multi- wire quick connector and used duck tape to tape the panel to the door and keep it out of the way. Another screw keeps the levers in their place, with a metal element. Remove it and the levers will come out. The ice guide just snaps out from two sides and a middle plastic hook of the ice dispenser lever. Replace everything in reverse order. That's about what I remember. Hope it helps.

Help other customers find the most helpful instructions.

Were these instructions helpful?   

21 of 40 people found this instruction helpful

Parts Used:
Level of Difficulty: Really Easy
Time to do repair: 15 - 30 mins
Tools: Screw drivers
Customer: Peter from Hollywood, FL

Black dishwasher with unmatched white appliances

I'm trying to sell my house but the dishwasher was black and the rest of the appliances in the kitchen are white. I ordered the white panels for my dishwasher online at partselect.com. Two days later they arrived and for just over $100 i had a matching white dishwasher. It was a much cheaper solution than replacing an otherwise perfectly good black dishwasher with a white one to match the other appliances. The total time to change the panels was approximately 15-20 minutes. The project only required a phillips head screw driver .

Help other customers find the most helpful instructions.

Were these instructions helpful?   

12 of 16 people found this instruction helpful

Parts Used:
Level of Difficulty: Easy
Time to do repair: 15 - 30 mins
Tools: Nutdriver, Screw drivers, Wrench set
Customer: Diana from GILBERT, AZ

Water and ice dispenser discolored

I replaced these parts mainly for aesthetic reasons and to prepare our home for a rental. I was very impressed with PartSelect's customer service and delivery. The part literally arrived the next day. Will definitely do business with them again.

Help other customers find the most helpful instructions.

Were these instructions helpful?   

11 of 21 people found this instruction helpful

Parts Used:
Level of Difficulty: Easy
Time to do repair: 1- 2 hours
Tools: Screw drivers
Customer: Serge from San Jose, CA

Water and ice dispensers were old with hard water

Some screw not easily accessible. I broke the ice dispenser mechanism but could glue it back so everything fine for now.

Help other customers find the most helpful instructions.

Were these instructions helpful?   

2 of 3 people found this instruction helpful

Parts Used:
Level of Difficulty: Really Easy
Time to do repair: 30 - 60 mins
Tools: Nutdriver, Screw drivers
Customer: Raymond from KALAMAZOO, MI

The control bracket which holds the micro switches broken on the water side.

Removed the front cover, not easy, I was worried it was going to break but it did pop off. Be sure to locate the two notches on the bottom so your pulling in the correct location. Unplugged the wire harness from the front cover and control panel, there is a locking tab on one side that must be released to unplug. Removed two screws that hold the control bracket, slide it out and remove the micro switches and lamp holder. Unplug the wires from the micro switches, it is easier to do when they are not in the control bracket. Attach the wires to the new micro switches, I replaced both since it was apart. Install the spacers for the switches and then slide on each switch. Make sure they are locked into the notch on the two support pins for each switch. Snap in the lamp holder and check the wiring routes so nothing is pinched. Attach the control bracket and plug the front panel into the control bracket plug and then test the water and ice. If they both work you've done a good job. The new control panel has a place to slide the wiring connection in so it stays in place. Do it now and snap the cover back on. I had to hit the bottom corners pretty hard to get it to snap in but once it is in place it is solid. It took about 30 minutes but I had taken this apart before when I discovered the holders for the water micro switch were broken so that made it much easier the second time around. The new bracket and holders seem to be made better. The new drip tray is also much better and fits much better two. Good luck, don't be in a hurry.

Help other customers find the most helpful instructions.

Were these instructions helpful?   

0 of 2 people found this instruction helpful

Parts Used:
  • Dispenser Grille
Level of Difficulty: Really Easy
Time to do repair: Less than 15 mins
Tools:
Customer: Nancy from Morgan Hill, CA

The old grill had become discolored from hard water.

Just slipped old one out and put new one in.
I will definitely use this company again..it was easy to order and the part arrived quickly.

Help other customers find the most helpful instructions.

Were these instructions helpful?   

1-6 of 6

Model Cross Reference

This part works with the following models:

PartSelect Number: PS11739060
Manufacturer Part Number: WP2183787W
Brand Model Number Description
Kenmore10650022000Refrigerator
Kenmore10650022001Refrigerator
Kenmore10650022002Refrigerator
Kenmore10650022003Refrigerator
Kenmore10650022004Refrigerator
Kenmore10650027000Refrigerator
Kenmore10650027001Refrigerator
Kenmore10650027002Refrigerator
Kenmore10650027003Refrigerator
Kenmore10650027004Refrigerator
Kenmore10650032000Refrigerator
Kenmore10650032001Refrigerator
Kenmore10650032002Refrigerator
Kenmore10650032003Refrigerator
Kenmore10650032004Refrigerator
Kenmore10650037000Refrigerator
Kenmore10650037001Refrigerator
Kenmore10650037002Refrigerator
Kenmore10650037003Refrigerator
Kenmore10650037004Refrigerator
Kenmore10650252000Refrigerator
Kenmore10650252001Refrigerator
Kenmore10650252002Refrigerator
Kenmore10650254000Refrigerator
Kenmore10650254001Refrigerator
Kenmore10650254002Refrigerator
Kenmore10650257000Refrigerator
Kenmore10650257001Refrigerator
Kenmore10650259000Refrigerator
Kenmore10650259001Refrigerator