Part Location Diagram of WP21352320 Whirlpool Drive Belt - 51 inches long
See part 30 in the diagram
Replacing your Norge Washer Drive Belt - 51 inches long
( Grid squares measure 1x1 inch )
Customer Service Representative

Get in touch, we're here to help!

Monday to Saturday
8am - 9pm EST

customerservice@partselect.com

Drive Belt - 51 inches long WP21352320

 Fits your 6002A!
★★★★★
★★★★★
25 Reviews

Rated by 76 customers 

Easy 

30 - 60 mins 

Ratings submitted by customers like you who bought this part.

$ 10.98
  In Stock
Get FREE EconoShip on orders over $100! T&C apply

Get this part fast! Average delivery time for in-stock parts via standard shipping: 1.8 days.

 Fits your 6002A!
PartSelect Number PS11738882
Manufacturer Part Number WP21352320
Manufactured by Whirlpool
Product Description

Drive Belt - 51 inches long Specifications

This V-style drive belt measures 51 inches long and 3/8 inches wide. The belt is made to slip on the motor pulley to bring the basket up to the speed required. Continued use can result in the belt suffering from wear and tear. Replace the V-style drive belt if you notice that it looks damaged. The most common symptoms of a damaged drive belt include: a burning smell or a loud grinding noise coming from the washer; the drum will not spin, spins slowly, or will not agitate; the washer shakes and moves, will not start, or will not drain.
How Buying OEM Parts Can Save You Time and Money

How Buying OEM Parts Can Save You Time and Money

Part Videos

Replacing your Norge Washer Drive Belt - 51 inches long

Replacing your Norge Washer Drive Belt - 51 inches long
Troubleshooting
This part fixes the following symptoms:
Burning smell | Spins slowly | Will not drain | Will not agitate
This part works with the following products:
Washer.
This part works with the following products:
Norge, Magic Chef, Admiral, Maytag.
Part# WP21352320 replaces these:
AP6005822, 21001478, 21352320, 35-2073, 35-2320, 35-3662, WP21352320VP
Back to Top
Customer Reviews
Average Rating:
★★★★★
★★★★★
25 Reviews
4.8
Filter By Rating:
  • 5 Stars
    23
  • 4 Stars
    1
  • 3 Stars
    0
  • 2 Stars
    0
  • 1 Star
    1
Sort by:
  • 1
  • 2
  • 3
Sorry, we couldn't find any existing reviews that matched. Try using some different or simpler keywords.
  • 1
  • 2
  • 3
Customer Repair Stories
 Average Repair Rating: 3.5 / 5.0, 76 reviews. What's this?
Sort by:
  • 1
  • 2
  • 3
Sorry, we couldn't find any existing installation instruction that matched.
Not spinning, not agateing, could here motor try to start but would trip the internal overload after a few seconds and had a hot motor smell or hot plastic
Got it outside layed it on its side and replaced the motor and belt thinking motor got very hot and heated belt, it was worn from age so replaced it at the same time, hooked water hose up to cold side to test, worked great. Wife very happy
Other Parts Used:
Drive Belt - 51 inches long Motor with Pulley
  • Flash from SAN ANTONIO, TX
  • Difficulty Level:
    Really Easy
  • Total Repair Time:
    30 - 60 mins
  • Tools:
    Nutdriver, Socket set, Wrench set
2 of 2 people found this instruction helpful.
Was this instruction helpful to you?
Thank you for voting!
Our washer was purchased 1/6/2006 and it started banging and walking out of its place when the washer started into the spin cycle. This would occur no matter the size of the load.
We followed the instructions show on the video. However, our model was assembled slightly different. We had to remove the screws from both sides of the side panels so that we could remove the tub from inside of the machine. Also our model only has one belt not two.
Over all it was easy considering my husband and I had never attempted to repair a washer. Once we got it back together it when back to working like it had never been broken!
We would have never been able to repair our washer without the video that your site provided... thanks so much!!??

Sure wish the manufactures would consider making the older models again as lots of us are not happy with the new modules being manufactured presently!
Other Parts Used:
Screw Drive Belt - 51 inches long Snubber Ring
  • Pamelia from LA CROSSE, VA
  • Difficulty Level:
    Easy
  • Total Repair Time:
    30 - 60 mins
  • Tools:
    Nutdriver, Pliers, Screw drivers, Wrench (Adjustable)
2 of 2 people found this instruction helpful.
Was this instruction helpful to you?
Thank you for voting!
Worn belt
Rolled the old one off and rolled the new one on.
  • Richard from OXFORD, NY
  • Difficulty Level:
    Really Easy
  • Total Repair Time:
    Less than 15 mins
1 person found this instruction helpful.
Was this instruction helpful to you?
Thank you for voting!
Random slow spin during Rinse cycle and would then shut off and not drain
Top loader May Tag washer with open bottom. After research I presumed it needed a new belt, or Transmission, which runs 3 pulleys under the open bottom. After tipping the washer back for inspection, saw oil splatter underneath. Removed old belt by turning largest pulley on Transmission while pulling the belt "off" the edge. Belt was aged, Stretched and worn. Belt and all 3 pulleys were oily causing slippage. The main large Drive pulley on the Transmission shaft, has a plastic snap on grease cup at it's center. I snapped it off with screw driver. The cup was partially full of thinned old grease causing the oily mess. There's a C clip inserted in a groove on the end of the drive shaft holding the pulley on. Removed the C clip with screw driver tip and slid off the Drive pulley. The Center of the pulley contains a plastic ratchet assembly that operates the washer tub cycle to rotate and stop and repeat. The ratchet assembly falls right out, and in the end of transmission is a Thrust washer which can be pulled of easily also. I Cleaned all 3 pulleys with De-greaser and finally with Rubbing Alcohol to dry the pulley surfaces. Then cleaned and removed all grease from the plastic ratchet assembly parts and cleaned them. Then I Repacked everything including the Drive shaft with "heavier" Grease that would not break down so easy. Reassembled everything in reverse and installed on the shaft. Snapped the C clip back on to hold pulley back in place and then the Grease cup, which just snaps back in place with a push. Installed new drive belt in the same manner it was removed, only in reverse by turning the pulley, and pushing the belt "on" over the edge of the pulley. Problem fixed and washer works perfect again with Noticeably better operation through all washer cycles.
  • Frank from BRADFORD, MA
  • Difficulty Level:
    Easy
  • Total Repair Time:
    30 - 60 mins
  • Tools:
    Screw drivers
2 of 2 people found this instruction helpful.
Was this instruction helpful to you?
Thank you for voting!
Washer was leaking
The washer was making a terrible squealing noise and when I examined it, I found the drain pump was leaking. I found a few videos online and then found this site when I started searching for replacement parts. I was originally just going to order the drain pump, but this site lead me to check out the underside of the washer where I found the belt had basically melted onto the motor wheel. Watched a few videos here, determined that the motor itself was still operating fine, so i ordered a drain pump, motor wheel, and a new belt. 2 days later they arrived. The motor wheel was hard to get off. I ended up prying it off with a hammer. Then gently tapped the new one on. Replacing the drain pump was simple - use a socket wrench to unscrew the 3 bolts holding it on, disconnect the hoses, then just do the reverse to put it back. At that point, I just slipped the new belt on, made sure everything was turning smoothly and ran a small test load in the washer. It was as good as new and cost me a lot less than buying a new one or calling a repairman.
Other Parts Used:
Washer Drain Pump Drive Belt - 51 inches long Plastic Motor Pulley
  • Kenneth from HAMPSTEAD, MD
  • Difficulty Level:
    Easy
  • Total Repair Time:
    30 - 60 mins
  • Tools:
    Pliers, Screw drivers, Socket set
1 person found this instruction helpful.
Was this instruction helpful to you?
Thank you for voting!
Washer was making noise during spin cycle
Hardest part was finding part that needed the needed repair. Searching the web for issues associated with the sound resulted in many links. Once the sound was found, I went to the video to see how to remove the Water Pump so I could examine it to confirm that was the correct piece. It took about 15 minutes to remove the part. Since I had to remove the belt to get it out, I realize that the belt needed replacement as well. So both parts were ordered. Replacing the parts also took about 15 minutes. Relatively easy repair. Be aware that the video on the part select video shows the water pump in a different location than the Maytag washer. To get to the Maytaq water pump, there is a panel in the back that had to be opened to access the water pump.
Other Parts Used:
Drain Pump with Pulley Drive Belt - 51 inches long
  • William from MORGANVILLE, NJ
  • Difficulty Level:
    Really Easy
  • Total Repair Time:
    15 - 30 mins
  • Tools:
    Pliers, Screw drivers, Socket set
2 of 2 people found this instruction helpful.
Was this instruction helpful to you?
Thank you for voting!
Pump making grinding noise
Pulled machine out from wall. Tilted back and rolled belt from pulleys. Pulled further out and removed cover plate 3 screws. Disconnected hoses with pliers and removed 3 screws with nut driver took out old pump and placed new pump into position. Replaced screws and hoses replaced cover. Tilted machine and replaced new belt. Put machine back in place. Started machine with no laundry. Checked for leaks Done. Approximately 20 minutes. Working great
Other Parts Used:
Washer Drain Pump Drive Belt - 51 inches long
  • Dennis from LUTTS, TN
  • Difficulty Level:
    Really Easy
  • Total Repair Time:
    15 - 30 mins
  • Tools:
    Nutdriver, Pliers
1 person found this instruction helpful.
Was this instruction helpful to you?
Thank you for voting!
Washer always going off balance full loads or small
I tilted top cover to remove front washer panel removed suspension springs to remove complete tub assembly to gain access to bottom. Drive pulley to remove snubber ring I performed the repair step by step as per your video. was dead on made the repair go smoothly. I installed the belt last tilting washer mechine back to gain access to undercarrige just walked belt on all three pulleys self adjusting then. made sure washer was level. Front to back side to side no rocking in any deriction My wife did four full loads problems gone I think all needed to be done to complete repair snubber ring , washer drive belt, & leveling machine all played there roll in putting washer back in factory working condition washer not a angery walking vibration nightmare
Other Parts Used:
Drive Belt - 51 inches long Snubber Ring
  • Jeffrey from HONEY BROOK, PA
  • Difficulty Level:
    Easy
  • Total Repair Time:
    30 - 60 mins
  • Tools:
    Nutdriver, Pliers, Socket set, Wrench (Adjustable)
3 of 3 people found this instruction helpful.
Was this instruction helpful to you?
Thank you for voting!
WASHER OUT OF COUNTER BALANCE
Problem fix after replace Snubber ring, I also replace suspension spring and driver belt due to the fact I'm already taking it a part
Other Parts Used:
Drive Belt - 51 inches long Snubber Ring Suspension Spring
  • Ryan from SAN DIEGO, CA
  • Difficulty Level:
    Really Easy
  • Total Repair Time:
    1- 2 hours
  • Tools:
    Pliers, Screw drivers, Socket set
4 of 4 people found this instruction helpful.
Was this instruction helpful to you?
Thank you for voting!
noisy pump
Removed back plate, tilted up washer removed pump removed belt. Then replace pump and then replaced belt
Other Parts Used:
Drain Pump with Pulley Drive Belt - 51 inches long
  • Tery from Orange, CA
  • Difficulty Level:
    Easy
  • Total Repair Time:
    15 - 30 mins
  • Tools:
    Nutdriver, Pliers, Screw drivers
0 of 1 people found this instruction helpful.
Was this instruction helpful to you?
Thank you for voting!
  • 1
  • 2
  • 3
Questions and Answers

Ask our experts a question about this part and we'll get back to you as soon as possible!

13 questions answered by our experts.
Sort by:
  • 1
  • 2
Sorry, we couldn't find any existing answers that matched.Try using some different or simpler keywords, or submit your new question by using the "Ask a Question" button above!
Albert
September 29, 2017
Can I purchase and replace just the motor pulley?
For model number MAV2757AWW
PartSelect logo
Hello, Thank you for contacting us. I have researched the model you have provided and have found the part you’re looking for is only sold as part of the motor assembly,PartSelect Number PS11738839. Hope this helps!

9 people found this helpful.

Was this helpful?
Thank you for voting!
Danny
March 7, 2019
Motor pulley was broken because of wrong drive belt a little wider for Maytag washer mav3855aww is it easy to install a new pulley to the motor please tell me the right parts.On this model. Thank you.
For model number MAV3855AWW
PartSelect logo
Hello Danny, Thank you for contacting us. I have researched the model you have provided and have found the part you are looking for is PartSelect Number PS11738839. The pulley is only sold as part of the motor assembly. We also have a How To Video online on how to install. Thank you for your inquiry, good luck with this repair!

2 people found this helpful.

Was this helpful?
Thank you for voting!
Related Parts:
Derek
July 1, 2019
My washer will start and go through the initial cycles of filling, then agitating but then all of a sudden will start to sound like its bogging out and is having a hard time running. When this starts to happen it then eventually stops, and a burning smell is present. There is also a consistent metal of metal grinding sound. Ive disconnected and washed out the pump and when i did the pulley wheel seems to grind on its metal casing which i assume is the noise i hear. My gut is telling me maybe the belt is slipping and also the drain pump is grinding on itself.. what is the answer here?
For model number PAV2300AWW
PartSelect logo
Hello Derek, thank you for inquiring. For this symptom you will want to replace the Drain Pump with Pulley part PS11741799 for your model.

2 people found this helpful.

Was this helpful?
Thank you for voting!
Ramiro
April 15, 2019
Is this belt fit in my Maytag washer ?
For model number HAV2557AWW
PartSelect logo
Hello Ramiro, Thank you for contacting us. I have researched the model you have provided and have found the part you are looking for is PartSelect Number PS11738882. Hope this helps, good luck with this repair!

1 person found this helpful.

Was this helpful?
Thank you for voting!
Brenda
May 10, 2019
I just replaced my belt because it wasn’t spinning all the water out now it spins all water out but doesn’t spin fast enough to wring clothes out
For model number Mav3855aww
PartSelect logo
Hi Brenda, thank you for your question. Other parts that you should check when your appliance is not draining correctly and not spinning fast enough would be your drain pump, your lid switch, and your motor. I hope that helps. Good luck with your repair.

1 person found this helpful.

Was this helpful?
Thank you for voting!
Dwight
March 10, 2018
How do I remove the timer knob to remove the timer for the washer?
For model number CAV2004AJW
PartSelect logo
Hello Dwight, Thanks for your question. You will need to access the back of the timer. In the center there is a hole with a shaft. Pull out on this shaft which will let you remove the timer. I hope this helps.

1 person found this helpful.

Was this helpful?
Thank you for voting!
Ronald
February 18, 2019
After the drying cycle the cloths are still damper then what they used to be iam thinking the belt might be the problem the washer is 10 years old and the belt has never been changed what is your thought that the problem might be the washer does run through the cycles ok
For model number mavt446aww
PartSelect logo
Hello Ronald, thank you for your question. Yes, we would recommend replacing the Drive Belt - 51 inches long Part Number: WP21352320 and Transmission Pulley and Bearing Kit Part Number: 12002213 first. If that doesn't fix the issue the issue could be the drain pump itself. I hope this helps!

1 person found this helpful.

Was this helpful?
Thank you for voting!
Kim
November 3, 2022
This washer is the BEST! It's about 20 years old & has NEVER had a problem. But when it spins it's off balance, real noisy, actually moves across the floor... I frequently have to rearrange the clothes to make it spin smoothly.
For model number PAV2300AWW
PartSelect logo
Hello Kim, thank you for contacting us. We would recommend checking the following parts to fix your issue: Drive Belt, part number PS11738882, Transmission Pulley and Bearing Kit, part number PS2003651, and Drain Pump, part number PS11741803. We look forward to hearing from you if you need assistance with placing an order through our 7-days-a-week customer service. We hope this helps!

1 person found this helpful.

Was this helpful?
Thank you for voting!
Related Parts:
Leonard
March 11, 2023
Drive belt WP221352320 is this the replacement for 35-3662 AU the website says it 51 inches long mine seems not to be that big.
For model number AAV7000AWW
PartSelect logo
Hello Leonard, thank you for your question. We can confirm that the Belt PS11738882 is the correct one for model AAV7000AWW and it is 51 inches long. We look forward to hearing from you.

1 person found this helpful.

Was this helpful?
Thank you for voting!
Steve
December 3, 2018
Tan motor pulley is coated with melty black gunk, i assume from belt slipping. I see new pulley only comes with motor unit, which i hope i do not need. I am thinking i can scrape off the black plastic from tan pulley, install a new belt and be done with it. Could melted plastic be part of original pulley, or more likely residue from melting belt?
For model number amana washer nav3335aww
PartSelect logo
Hello Steve, thank you for your question. The residue is probably from the belt, but it could be because the pulley is/has started to seize and will have to be replaced. If the pulley doesn't turn freely the motor would have to be replaced as the pulley is only available by ordering the motor part number PS11738839. I hope this helps!

Was this helpful?
Thank you for voting!
  • 1
  • 2
You May Also Need ?
Model Cross Reference
This part works with the following models:
PartSelect Number: PS11738882
Manufacturer Part Number: WP21352320
Brand
Model Number
Description
Norge
6002A
Washer - WASHER
Norge
6430
Washer - WASHER
Norge
6432A
Washer - WASHER
Norge
6432A REV A
Washer - Norge Washing Machine Model 6432A REV A (6432AREVA) Parts
Norge
6432A REV B
Washer - Norge Washing Machine Model 6432A REV B (6432AREVB) Parts
Norge
6432A REV C
Washer - Norge Washing Machine Model 6432A REV C (6432AREVC) Parts
Norge
6432A REV D
Washer - Norge Washing Machine Model 6432A REV D (6432AREVD) Parts
Norge
6433A
Washer - WASHER
Norge
6440A
Washer - WASHER
Norge
6440A REV A
Washer - Norge Washing Machine Model 6440A REV A (6440AREVA) Parts
Norge
6440A REV B
Washer - Norge Washing Machine Model 6440A REV B (6440AREVB) Parts
Norge
6440A REV C
Washer - Norge Washing Machine Model 6440A REV C (6440AREVC) Parts
Norge
6440A REV D
Washer - Norge Washing Machine Model 6440A REV D (6440AREVD) Parts
Norge
6440A REV E
Washer - Norge Washing Machine Model 6440A REV E (6440AREVE) Parts
Norge
6440A REV F
Washer - Norge Washing Machine Model 6440A REV F (6440AREVF) Parts
Norge
6440A REV G
Washer - Norge Washing Machine Model 6440A REV G (6440AREVG) Parts
Norge
6440A REV H
Washer - Norge Washing Machine Model 6440A REV H (6440AREVH) Parts
Norge
6440A REV J
Washer - Norge Washing Machine Model 6440A REV J (6440AREVJ) Parts
Norge
6440A REV K
Washer - Norge Washing Machine Model 6440A REV K (6440AREVK) Parts
Norge
6443A
Washer - WASHER
Norge
6443A REV D
Washer - Norge Washing Machine Model 6443A REV D (6443AREVD) Parts
Norge
6443B
Washer - WASHER
Norge
6530A
Washer - WASHER
Norge
6530A REV A
Washer - Norge Washing Machine Model 6530A REV A (6530AREVA) Parts
Norge
6530A REV B
Washer - Norge Washing Machine Model 6530A REV B (6530AREVB) Parts
Norge
6530A REV C
Washer - Norge Washing Machine Model 6530A REV C (6530AREVC) Parts
Norge
6530A REV D
Washer - Norge Washing Machine Model 6530A REV D (6530AREVD) Parts
Norge
6530A REV E
Washer - Norge Washing Machine Model 6530A REV E (6530AREVE) Parts
Norge
6530A REV F
Washer - Norge Washing Machine Model 6530A REV F (6530AREVF) Parts
Norge
6530A REV G
Washer - Norge Washing Machine Model 6530A REV G (6530AREVG) Parts
Customer Service Representative

Get in touch, we're here to help!

Monday to Saturday
8am - 9pm EST

Contact Customer Service