Install videos!
11738880-1-M-Whirlpool-WP213045-Outer Tub to Pump Hose
Part Location Diagram of WP213045 Whirlpool Outer Tub to Pump Hose
See part 45 in the diagram
Replacing your Maytag Washer Outer Tub to Pump Hose
11738880-1-S-Whirlpool-WP213045-Outer Tub to Pump Hose 360 view
( Grid squares measure 1x1 inch )
11738880-1-S-Whirlpool-WP213045-Outer Tub to Pump Hose 11738880-2-S-Whirlpool-WP213045-Outer Tub to Pump Hose 11738880-1-S-Whirlpool-WP213045-Outer Tub to Pump Hose 360 view
Part Location Diagram of WP213045 Whirlpool Outer Tub to Pump Hose Replacing your Maytag Washer Outer Tub to Pump Hose
Customer Service Representative

Get in touch, we're here to help!

Daily 8am - 9pm EST

customerservice@partselect.com

Outer Tub to Pump Hose WP213045

★★★★★
★★★★★
17 Reviews

Rated by 20 customers 

Really Easy 

30 - 60 mins 

Ratings submitted by customers like you who bought this part.

$ 42.82
  In Stock
Get FREE EconoShip on orders over $100! T&C apply

Get this part fast! Average delivery time for in-stock parts via standard shipping: 1.8 days.

PartSelect Number PS11738880
Manufacturer Part Number WP213045
Manufactured by Whirlpool
Product Description

Outer Tub to Pump Hose Specifications

This hose connects the outer tub to the pump of your washing machine. It is twelve inches long and all black in color. This hose is made entirely of rubber.
How Buying OEM Parts Can Save You Time and Money

How Buying OEM Parts Can Save You Time and Money

Part Videos

Replacing your Maytag Washer Outer Tub to Pump Hose

Replacing your Maytag Washer Outer Tub to Pump Hose
Back to Top
Troubleshooting
This part fixes the following symptoms:
Leaking
This part works with the following products:
Washer, Washer Dryer Combo.
This part works with the following products:
Maytag, Jenn-Air, International.
Part# WP213045 replaces these:
AP6005820, 2-13045, 213045
Back to Top
Customer Reviews
Average Rating:
★★★★★
★★★★★
17 Reviews
4.9
Filter By Rating:
  • 5 Stars
    15
  • 4 Stars
    2
  • 3 Stars
    0
  • 2 Stars
    0
  • 1 Star
    0
Sort by:
  • 1
  • 2
Search filter:
Clear Filter
Your search term must have 3 or more characters.
Keep searches simple. Use keywords, e.g. "leaking", "pump", "broken" or "fit".
Sorry, we couldn't find any existing reviews that matched. Try using some different or simpler keywords.
★★★★★
★★★★★
Kate L - September 3, 2022
  Verified Purchase
Maytag repair.
The Maytag was a very old washing machine. The part fit was exactly right for replacing the worn out one. No modifications needed.
★★★★★
★★★★★
Thomas M - July 2, 2021
  Verified Purchase
Quick fix for Maytag washer
Our old Maytag washer was leaking water. I've often bought parts from a local merchant, but I had used the PartSelect website to find out which part I had needed. I did the same this time but realized the prices on PartSelect were lower than the marked up prices from that local merchant. I decided to skip the "middle man" and just order directly from PartSelect and I'm glad I did. Immediately I was impressed by the customer service. I received an email with a link to an instructional video and had the feeling I could contact PartSelect if anything went wrong. Nothing ever did go wrong -- the part arrived promptly in the mail, I followed the helpful video they provided and I was back using the washer in less than half an hour. I will be going directly to PartSelect for any of my future DIY needs. I'm just really glad you guys are around.
★★★★★
★★★★★
Roger G - May 26, 2021
  Verified Purchase
Easy fix - but needed often!
Rodents love to eat this hose - understand it needs to be flexible - perhaps a flexible schield or aluminum flex to install over the hose.
★★★★★
★★★★★
Mark G - May 18, 2021
  Verified Purchase
Problem solver!
After discovering a small amount of water below washer . I removed front cover to discover a tired tub to pump hose. 3 days later part arrived and a easy fix. Other than having to replace clamps because older ones didn’t want to fit new part. Problem solved!
★★★★★
★★★★★
Christian P - January 7, 2020
  Verified Purchase
Fits perfect!!
Part fit perfectly. Had to reuse my old hose clamps since I didn’t have any new ones that fit.
★★★★★
★★★★★
Christopher F - December 17, 2019
  Verified Purchase
part came-right one -price excessive for a hose
part was correct one shipping was too high
★★★★★
★★★★★
Stuart J - May 3, 2019
  Verified Purchase
Tub to pump tube
The part was in good condition and came fast.
★★★★★
★★★★★
Bruce C - March 5, 2019
  Verified Purchase
Right part and quick delivery
Great experience.
★★★★★
★★★★★
Jack A - January 30, 2019
  Verified Purchase
Wow! Parts for a washer that is 30 years old
I was surprised that anyone would stock parts that fit a washer that was 30 years old! The parts were there and the delivery was at least prompt. In this area of Wyoming, we have to cope with postal service that seems GLACIAL in speed and less than energetic in action. Thanks - the pipe was ease to install and that only with two clamps. Thanks for you service and help.
★★★★★
★★★★★
Ricky H - November 21, 2018
  Verified Purchase
Fast shipping
Part arrived very quickly. Exactly what I needed. Easy repair. In the future I know where to go for the parts I need. Thanks.
  • 1
  • 2
Back to Top
Customer Repair Stories
 Average Repair Rating: 3.6 / 5.0, 20 reviews. What's this?
Sort by:
  • 1
  • 2
Search filter:
Clear Filter
Your search term must have 3 or more characters.
Keep searches simple. Use keywords, e.g. "leaking", "pump", "broken" or "fit".
Sorry, we couldn't find any existing installation instruction that matched.
water was leaking on floor
1. Remove front panel with phillips screw driver.

2. Remove hose from drum and exit pump

3. replace hose with new one (used some silicone grease on hose)

4. Tightened clamps with nut driver

5. ran a couple loads of wash to check for leaks

6. found none

7. replaced front panel - Job done
Read less
  • JOHN from SANTA FE, NM
  • Difficulty Level:
    Really Easy
  • Total Repair Time:
    30 - 60 mins
  • Tools:
    Nutdriver, Screw drivers
1 person found this instruction helpful.
Was this instruction helpful to you?
Thank you for voting!
Water drip
Remove frt cover to confirm leaks. Removed clamps and installed new hoses. Run washer to confirm repair. Washer is 58 years old and costs are less then 50.00 to fix every 4 years
Other Parts Used:
Dispenser Tube Outer Tub to Pump Hose
  • larry from LAKE CITY, MN
  • Difficulty Level:
    Very Easy
  • Total Repair Time:
    30 - 60 mins
  • Tools:
    Nutdriver, Pliers, Screw drivers
6 of 6 people found this instruction helpful.
Was this instruction helpful to you?
Thank you for voting!
pump and hose leak
Easily
Other Parts Used:
Drain Pump Outer Tub to Pump Hose
  • justine from NEWARK, NJ
  • Difficulty Level:
    Really Easy
  • Total Repair Time:
    30 - 60 mins
  • Tools:
    Screw drivers, Socket set, Wrench (Adjustable)
2 of 3 people found this instruction helpful.
Was this instruction helpful to you?
Thank you for voting!
Water won't drain, slight water leak, unbalances frequently
My washer was sitting in a safety drain pan which made it difficult to work on due to the height of the pan walls. Managed to tilt it back and support on blocks well enough to access underside. Found two of the four leveling feet had fallen off, which was the ultimate cause of the problems from the cumulative effect of running unbalanced over time. Reinstalled these feet and had to remove rust to do so. I added two more nuts to the front feet to hold the adjustment tight. After adjusting to level, washer ran great and was no longer prone to unbalance. Procedure: Remove front panel- two lower screws and pry/pull off. Remove hoses at pump. Remove 3 mounting screws from pump. Remove belt from pump pulley. Push motor towards center of washer to release tension from other belt, and remove belt. Replace with new belt. Replaced old drain hose to pump and replaced all hose clamps with new. Install pump, replace pump belt. Level the washer. Replace front panel. Take the opportunity while the washer is open to clean out the dust from inside!
Read less
Other Parts Used:
Drain Pump Outer Tub to Pump Hose Belt Kit
  • Jonathan from SPRINGFIELD, VA
  • Difficulty Level:
    Difficult
  • Total Repair Time:
    More than 2 hours
  • Tools:
    Nutdriver, Pliers, Screw drivers, Socket set, Wrench set
2 of 2 people found this instruction helpful.
Was this instruction helpful to you?
Thank you for voting!
leaking hoses and low tension on belts
opened front of washer, removed motor, replaced glides and springs, installed motor and replaced belts. Installed new hoses and vacuum breaker. Its been a week now and no leaks or other problems.
Other Parts Used:
Pump-to-Siphon Break Drain Hose Outer Tub to Pump Hose Siphon Break Connector Kit Glide and Spring Kit
  • john from COTTAGE GROVE, MN
  • Difficulty Level:
    Easy
  • Total Repair Time:
    1- 2 hours
  • Tools:
    Nutdriver, Pliers, Socket set
5 of 7 people found this instruction helpful.
Was this instruction helpful to you?
Thank you for voting!
Water leak due to split in 35 year old hose.
Replaced hose. Really appreciate Instructions, especially from other customers. Only thing I didn't have was new hose clamps, since this Maytag washer is 35 years old! (Love it! Works great!) Old hose clamps were absolutely rusted beyond any possible recovery, so I had a little trouble getting them off until I sprayed them with penetrating oil. Buying local clamps not a problem.
Read less
  • Donald from Savannah, GA
  • Difficulty Level:
    Really Easy
  • Total Repair Time:
    30 - 60 mins
  • Tools:
    Nutdriver, Screw drivers, Socket set
1 person found this instruction helpful.
Was this instruction helpful to you?
Thank you for voting!
hose split at claamp and leaking
replaced hose
  • Frank from Cloverdale, CA
  • Difficulty Level:
    Easy
  • Total Repair Time:
    15 - 30 mins
  • Tools:
    Screw drivers
0 of 1 people found this instruction helpful.
Was this instruction helpful to you?
Thank you for voting!
Washer was leaking water at hose to tub connection
Replaced the hose and new clamps. Rans washer through complete cycle. Found that during the spin cycle the tub seemed un-balanced and was making a metallic ticking sound.
Found that the thre struts which attach to the tub were loose-- especially the front nut. Found two halves of lead washer laying on bottom of washer cabinet. The washer had fallen out from behind the front strut and nut. Placed the washer back between the strut and tub and tightened the nut and the metallic sound was gone as well as most of the tub swaying during the spin cycle. Tightened all three strut's nuts. Ran washer through and additional cycle and washer was back to normal. The loose nuts seem to have caused excessive tub sway which in turn put extra stress on the tub hose connection to cause the original leak. Machine is 25 years old and still washing well!
Read less
  • Rich from Wheaton, IL
  • Difficulty Level:
    Easy
  • Total Repair Time:
    1- 2 hours
  • Tools:
    Screw drivers, Socket set
0 of 1 people found this instruction helpful.
Was this instruction helpful to you?
Thank you for voting!
water was leaking onto the floor
I removed the front of the washer (two screws) and found the drain hose to be cracked near the top where it attached to the drum. A hardware store hose was inadequate because it crimped when bent in an S shape as required, so I ordered the proper part amd installed with two new clamps.
I bought a 5/15 socket driver to do up the clamps, and all is fine.
Read less
  • William from Tonka Bay, MN
  • Difficulty Level:
    Really Easy
  • Total Repair Time:
    15 - 30 mins
  • Tools:
    Nutdriver, Pliers, Wrench (Adjustable)
2 of 2 people found this instruction helpful.
Was this instruction helpful to you?
Thank you for voting!
Washer leaking at the front.
Our Maytag (A308) washer is now about 29 yrs old. I put in a PartSelect water valve 3 yrs ago. When it started leaking recently I found the cuplrit to be a flexible hose to the outer basis. The front came off easily (two screws at the bottom) and the hose clamps required some cleaning. I recommend purchasing new clamps. Under 30 minutes to get it running again.
Read less
  • Ronald from Madison, NJ
  • Difficulty Level:
    Really Easy
  • Total Repair Time:
    15 - 30 mins
  • Tools:
    Screw drivers
4 of 5 people found this instruction helpful.
Was this instruction helpful to you?
Thank you for voting!
  • 1
  • 2
Back to Top
Questions and Answers

Ask our experts a question about this part and we'll get back to you as soon as possible!

1 question answered by our experts.
Sort by:
  • 1
Search filter:
Clear Filter
Your search term must have 3 or more characters.
Keep searches simple. Use keywords, e.g. "leaking", "pump", "broken" or "fit".
Sorry, we couldn't find any existing answers that matched.Try using some different or simpler keywords, or submit your new question by using the "Ask a Question" button above!
Serge
November 28, 2018
My washing machine does not spin pa bienele runs fast enough and the laundry rst soaked with water, as if the engine did not want to turn fast
For model number LA9400 Maytag
PartSelect logo
Hi Serge, Thank you for your question. If the washer is not spinning, there are some parts that you will need to check to see which ones are causing the issue. You will need to check the belt, the glide and spring kit, the brake assembly, the lid switch assembly, the tub bearing kit and the drain pump. I hope this helps. Thank you and have a great day!

2 people found this helpful.

Was this helpful?
Thank you for voting!
  • 1
Back to Top
You May Also Need ?
Belt Kit
$41.25
$41.25
  In Stock
Pump-to-Siphon Break Drain Hose
$51.75
$51.75
  In Stock
Hose Clamp
$11.10
$11.10
  In Stock
Back to Top
Model Cross Reference
This part works with the following models:
PartSelect Number: PS11738880
Manufacturer Part Number: WP213045
Brand
Model Number
Description
Maytag
6349
Washer - MAYTAG AUTOMATIC WASHER
Maytag
6359
Washer - MAYTAG AUTOMATIC WASHER
Maytag
A110
Washer - Top Loading
Maytag
A112
Washer - Top Loading
Maytag
A16CA
Washer
Maytag
A16CM
Washer
Maytag
A16CT
Washer
Maytag
A182
Washer - Top Loading
Maytag
A18CA
Washer
Maytag
A18CM
Washer
Maytag
A18CT
Washer
Maytag
A21CA
Washer
Maytag
A21CM
Washer
Maytag
A21CT
Washer
Maytag
A22CA
Washer
Maytag
A22CM
Washer
Maytag
A22CT
Washer
Maytag
A23CA
Washer
Maytag
A24CA
Washer
Maytag
A25CA
Washer
Maytag
A25CAE
Washer
Maytag
A25CM
Washer
Maytag
A25CME
Washer
Maytag
A25CS
Washer
Maytag
A25CT
Washer
Maytag
A26CA
Washer
Maytag
A26CAE
Washer
Maytag
A26CD
Washer
Maytag
A26CDC
Washer
Maytag
A308
Washer - Top Loading
Back to Top
Customer Service Representative

Get in touch, we're here to help!

Daily 8am - 9pm EST

Contact Customer Service
Outer Tub to Pump Hose
$ 42.82
  In Stock
✖
Stock Status
 In Stock

Item is in stock and will ship today if your order is placed before 4:00 PM Eastern Standard Time.

If your order is placed after 4:00 PM EST, the in stock items will ship on the next business day.

 On Order

Item is not in stock and usually ships 3-5 business days from the time you place your order.

 Special Order

Item is not in stock and usually ships 10-15 business days from the time you place your order.

 NLA - No Longer Available

This item is no longer being made by the manufacturer, and cannot be added to your shopping cart.