Part Location Diagram of WP213015 Whirlpool Plastic Injector Nozzle
See part 9 in the diagram
Replacing your Maytag Washer Plastic Injector Nozzle
( Grid squares measure 1x1 inch )
Customer Service Representative

Get in touch, we're here to help!

Open until 12am EST

customerservice@partselect.com

Plastic Injector Nozzle WP213015

★★★★★
★★★★★
7 Reviews

Rated by 57 customers 

Easy 

30 - 60 mins 

Ratings submitted by customers like you who bought this part.

$ 10.35
  In Stock

Get this part fast! Average delivery time for in-stock parts via standard shipping: 1.8 days.

PartSelect Number PS11738878
Manufacturer Part Number WP213015
Manufactured by Whirlpool
Product Description

Plastic Injector Nozzle Specifications

The plastic injector nozzle is used in washers and dryers. It is 3 inches long and is white in color. If your washer is leaking water, replacing the nozzle could solve your problem. For this repair project, you will need a 1/4 nut driver, 3/8 socket with extension, and a stubby Phillips screwdriver. To begin the repair, first remove the front panel by removing screws from the bottom end of both sides. Next, locate the two bolts in the interior of front panel and remove both. Pull bleach dispenser hose off before removing the top cover of washer. Remove clamp that holds the hose to the valve assembly to access the nozzle inside rubber valve and replace with new nozzle. Refer to the instructions provided by the manufacturer for further guidance.
How Buying OEM Parts Can Save You Time and Money

How Buying OEM Parts Can Save You Time and Money

Part Videos

Replacing your Maytag Washer Plastic Injector Nozzle

Replacing your Maytag Washer Plastic Injector Nozzle
Troubleshooting
This part fixes the following symptoms:
Leaking
This part works with the following products:
Washer, Washer Dryer Combo.
This part works with the following products:
Maytag, Jenn-Air.
Part# WP213015 replaces these:
AP6005818, 2-13015, 213015
Back to Top
Customer Reviews
Average Rating:
★★★★★
★★★★★
7 Reviews
4.7
Filter By Rating:
  • 5 Stars
    6
  • 4 Stars
    0
  • 3 Stars
    1
  • 2 Stars
    0
  • 1 Star
    0
Sort by:
  • 1
Sorry, we couldn't find any existing reviews that matched. Try using some different or simpler keywords.
  • 1
Customer Repair Stories
 Average Repair Rating: 3.5 / 5.0, 57 reviews. What's this?
Sort by:
  • 1
  • 2
  • 3
Sorry, we couldn't find any existing installation instruction that matched.
Water leaking
I'm a 70 year old woman. I followed all instructions provided by "Steve" from Partselect video. The video was very well presented and allowed me to fix the leaking problem myself. Watch the video...you can do it.
Other Parts Used:
Screw Rubber Injector Valve Plastic Injector Nozzle
  • LINDA from ANNANDALE, VA
  • Difficulty Level:
    Really Easy
  • Total Repair Time:
    30 - 60 mins
  • Tools:
    Nutdriver, Wrench set
3 of 3 people found this instruction helpful.
Was this instruction helpful to you?
Thank you for voting!
Hot water overflow injector, ran onto floor
You will need 2 hose clamps not sold as maytag parts.

Remove front washer panel screws.

Remove bolts holding front of top to side panels

Remove hose clamp from front hose to injector sleeve.

Twist fill hose ccw 90 degrees at tub fitting to remove.

Clean corrosion at tub attachment point wuth wire brush.

Paint bare metal to seal. Allow to thoroughly dry.

Remove injector sleeve and injector hose.

Trim new injector hose to match length of removed hose (I cut off abt 4 inches)

Install injector hose and plastic sleeve. Ensure clocking is correct on hose.

Install gasket on fill hose fitting.

Insert fitting into tub. Rotate 90 deg CW to latch.

Install gear clamps loosely on fill tube.

Attach fill tube to fill fitting and injector sleeve.

Slide clamps onto tube ends ensuring clamp clocking provides access and clears tub top..

Test tub fill to ensure injector works without leaks
Other Parts Used:
Injector Fill Hose Rubber Injector Valve Injector Sleeve Injector Tube Injector Tube Seal Plastic Injector Nozzle Injector Hose
  • Padraic from SAINT PAUL, MN
  • Difficulty Level:
    Easy
  • Total Repair Time:
    30 - 60 mins
  • Tools:
    Nutdriver, Screw drivers, Socket set
4 of 4 people found this instruction helpful.
Was this instruction helpful to you?
Thank you for voting!
Was over flowing the water in filling the process.
Took front off and loosened the top of machine. Took the tubing apart, put the new parts in and it works.
Other Parts Used:
Rubber Injector Valve Plastic Injector Nozzle
  • Herold from MANAWA, WI
  • Difficulty Level:
    A Bit Difficult
  • Total Repair Time:
    30 - 60 mins
  • Tools:
    Nutdriver, Screw drivers
1 person found this instruction helpful.
Was this instruction helpful to you?
Thank you for voting!
Leaking water on left side
The directions that were available when placing the order were right on
Other Parts Used:
Rubber Injector Valve Plastic Injector Nozzle
  • Norman from South St Paul, MN
  • Difficulty Level:
    Really Easy
  • Total Repair Time:
    15 - 30 mins
  • Tools:
    Screw drivers, Socket set
2 of 2 people found this instruction helpful.
Was this instruction helpful to you?
Thank you for voting!
Leaking at top of tub when filling with water
Did repair as instructed by video, I'm 74 years old if I can do it anybody can!
Other Parts Used:
Hose Clamp Rubber Injector Valve Injector Sleeve Plastic Injector Nozzle
  • Frank from Patterson, CA
  • Difficulty Level:
    Easy
  • Total Repair Time:
    1- 2 hours
  • Tools:
    Nutdriver, Pliers, Screw drivers, Socket set
4 of 5 people found this instruction helpful.
Was this instruction helpful to you?
Thank you for voting!
Water was leaking at the injector.
Used a Phillips head screwdriver to allow removal of the front panel. Used a socket set to allow tipping back of the top panel of the washer, to access the injector assembly. Used nut driver to loosen hose clamp. Replaced old injector nozzle and valve. Inserted plastic injector nozzle into rubber injector valve, ensuring that the nozzle was completely inserted into the valve. VERY IMPORTANT: Moistened the rim of the rubber injector valve, and gently inserted it into the hose, to ensure that the valve did not unroll from the nozzle during insertion into the hose. I found this caused a more serious leak on my first attempt at replacing the injector assembly. Inserted the hose and injector back into injector sleeve and retightened the hose clamp. Then repositioned the top panel, and replaced the front panel.
Other Parts Used:
Rubber Injector Valve Plastic Injector Nozzle
  • Bart from GROVELAND, MA
  • Difficulty Level:
    Easy
  • Total Repair Time:
    30 - 60 mins
  • Tools:
    Nutdriver, Screw drivers, Socket set
1 person found this instruction helpful.
Was this instruction helpful to you?
Thank you for voting!
leaking
Watched the video first that was offered. Stating what tools needed size of socket needed. Step by step and how to do the job. Which was very helpful.
Other Parts Used:
Rubber Injector Valve Injector Tube Seal Plastic Injector Nozzle
  • James from BEECHER, IL
  • Difficulty Level:
    Easy
  • Total Repair Time:
    15 - 30 mins
  • Tools:
    Screw drivers, Socket set
2 of 2 people found this instruction helpful.
Was this instruction helpful to you?
Thank you for voting!
Waher was leaking at the injecotr valve at the top left of the washer.
The three parts fit together to form one unit. As has been mentioned here already I'm not sure what purpose they serve. I'm also not sure how replacing them stopped the leak but it did. If it had not stopped I think I could have bypassed the valve entirely with a piece of hose or PVC and had it work just fine.
Other Parts Used:
Rubber Injector Valve Injector Sleeve Plastic Injector Nozzle
  • Arnoldo from AUSTIN, TX
  • Difficulty Level:
    Easy
  • Total Repair Time:
    15 - 30 mins
  • Tools:
    Nutdriver, Screw drivers
3 of 3 people found this instruction helpful.
Was this instruction helpful to you?
Thank you for voting!
Leak coming from underneath washer. Source unknown
Removed front panel ( 2 swrews). Turned off water to washer. Unplugged power cord. Removed two screws holding down top of washer. Located source of leak. It was the injector valve. Removed hose clamps. Removed defective injector valve (2 parts). Installed now injector valve (2 parts) as shown in video. Tightened hose clamps. Replaced top cover and front panel. Done
Other Parts Used:
Rubber Injector Valve Plastic Injector Nozzle
  • Elzo from Kalamazoo, MI
  • Difficulty Level:
    Easy
  • Total Repair Time:
    1- 2 hours
  • Tools:
    Nutdriver, Pliers, Screw drivers, Socket set
0 of 1 people found this instruction helpful.
Was this instruction helpful to you?
Thank you for voting!
Minor water leakage visible on floor on left side of washing machine.
I opened up the front panel of the washing machine and noticed that water was leaking from a hose along the top left of the machine. I ordered a new plastic injector nozzle and rubber injector valve. The parts arrived in 2 days. Switchout of the parts took less than 5 minutes. Tested it out; the leak was gone. Total cost $22.62. Money well spent!
Other Parts Used:
Rubber Injector Valve Plastic Injector Nozzle
  • Ronald from Buford, GA
  • Difficulty Level:
    Easy
  • Total Repair Time:
    Less than 15 mins
  • Tools:
    Screw drivers, Socket set
0 of 1 people found this instruction helpful.
Was this instruction helpful to you?
Thank you for voting!
  • 1
  • 2
  • 3
Questions and Answers

Ask our experts a question about this part and we'll get back to you as soon as possible!

2 questions answered by our experts.
Sort by:
  • 1
Sorry, we couldn't find any existing answers that matched.Try using some different or simpler keywords, or submit your new question by using the "Ask a Question" button above!
Wayne
October 23, 2017
Water coming out of the bleach dispenser tube.......pouring on floor......what is the problem?.......is the injector tube in the tube?
For model number Maytag A512
PartSelect logo
Hi Wayne, Thank you for your question. I would suggest taking a look at your tube to see if there are any holes or tears which could cause the leaking. If there are, you would have to replace the tubing. Good luck with your repair.

3 people found this helpful.

Was this helpful?
Thank you for voting!
Joan
April 5, 2023
Is the plastic injector nozzle really necessary? What is it's purpose. My husband bypassed it and the washer no longer leaks. He doesn't think the part is necessary.
For model number LA212S
PartSelect logo
Hi Joan, thank you for contacting us. The purpose of the injector nozzle is to pressurize the water to deliver the proper amount of water to the required location. It is part of the appliance. We hope this information is useful!

Was this helpful?
Thank you for voting!
  • 1
You May Also Need ?
Model Cross Reference
This part works with the following models:
PartSelect Number: PS11738878
Manufacturer Part Number: WP213015
Brand
Model Number
Description
Maytag
A104
Washer - Top Loading
Maytag
A105
Washer - Top Loading
Maytag
A106
Washer - Top Loading
Maytag
A106S
Washer - Residential
Maytag
A107
Washer - Top Loading
Maytag
A107S
Washer - Residential
Maytag
A108
Washer - Top Loading
Maytag
A108S
Washer - Residential
Maytag
A110
Washer - Top Loading
Maytag
A112
Washer - Top Loading
Maytag
A15CA
Washer
Maytag
A15CM
Washer
Maytag
A15CT
Washer
Maytag
A16CA
Washer
Maytag
A16CM
Washer
Maytag
A16CT
Washer
Maytag
A17CA
Washer
Maytag
A17CM
Washer
Maytag
A17CT
Washer
Maytag
A180
Washer - Top Loading
Maytag
A181
Washer - Top Loading
Maytag
A182
Washer - Top Loading
Maytag
A183
Washer - Top Loading
Maytag
A18CA
Washer
Maytag
A18CM
Washer
Maytag
A18CT
Washer
Maytag
A190
Washer - Top Loading
Maytag
A1910
Washer - Top Loading
Maytag
A206
Washer - Top Loading
Maytag
A206S
Washer - Top Loading
Customer Service Representative

Get in touch, we're here to help!

Open until 1am EST

Contact Customer Service