Quick Question!

Have you ever purchased from PartSelect.com before?

11738878-1-S-Whirlpool-WP213015-Plastic Injector Nozzle
11738878-1-S-Whirlpool-WP213015-Plastic Injector Nozzle https://www.partselect.com/Schematics/Maytag/37308.gif

Plastic Injector Nozzle

Your Price

$9.08
Order within the next 10 hrs and your part ships today!
Get this part fast. Average delivery time via standard shipping: 1.8 days.

PartSelect Number PS11738878
Manufacturer Part Number WP213015
Manufactured by Whirlpool

The plastic injector nozzle is used in washers and dryers. It is 3 inches long and is white in color. If your washer is leaking water, replacing the nozzle could solve your problem. For this repair project, you will need a 1/4 nut driver, 3/8 socket with extension, and a stubby Phillips screwdriver. To begin the repair, first remove the front panel by removing screws from the bottom end of both sides. Next, locate the two bolts in the interior of front panel and remove both. Pull bleach dispenser hose off before removing the top cover of washer. Remove clamp that holds the hose to the valve assembly to access the nozzle inside rubber valve and replace with new nozzle. Refer to the instructions provided by the manufacturer for further guidance.

This part works with the following brands: Maytag, Jenn-Air.

This part works with the following products: Washer, Washer Dryer Combo.

This part fixes the following symptoms:

  • Leaking.

Videos For installing this part.

Questions & Answers

Ask our experts a question on this part and we'll respond as soon as we can.

Installation Instructions Provided by PartSelect customers like you.

Average Repair Rating: 3.5 / 5.0, 53 reviews What's this?
46-53 of 53
 

0 of 1 people found this instruction helpful

Parts Used:
Level of Difficulty: Really Easy
Time to do repair: 15 - 30 mins
Tools: Nutdriver, Screw drivers
Customer: Russell from Tucson, AZ

Water was leaking on the left side/

Removed the front cover with two screws at the bottom face. Two steel bolts and the top raises up. Removed the old rubber part and put the new one in. NO LEAK!

I had read where several people had to do the same thing. I will always have a washer basin under it from now on though.

Help other customers find the most helpful instructions.

Were these instructions helpful?   

0 of 1 people found this instruction helpful

Parts Used:
Level of Difficulty: Really Easy
Time to do repair: 15 - 30 mins
Tools: Nutdriver, Screw drivers
Customer: Kevin from Hinckley, MN

Water leaking from fill hose

First I removed the front cover by removing screws
towards the bottom of the front. Then I removed the
bolt in each of the front top corners. Now you can lift the top all the way up. Next I located the filler hose that has the injector nozzle and the rubber injector valve. Next I loosened the clamps that hold these parts in place. Next I replaced the worn parts with the new parts and reassembled everything in reverse order.

Help other customers find the most helpful instructions.

Were these instructions helpful?   

0 of 1 people found this instruction helpful

Parts Used:
Level of Difficulty: Really Easy
Time to do repair: 15 - 30 mins
Tools: Screw drivers, Socket set, Wrench (Adjustable), Wrench set
Customer: Chuck from Vashon Island, WA

Leaking water

I removed front panel and top hold down screws. Then removed the clamp, replaced the rubber injector valve and the plastic injector nozzle. re-assembled the unit and tested - everything worked fine - no leaks.

Help other customers find the most helpful instructions.

Were these instructions helpful?   

1 of 4 people found this instruction helpful

Parts Used:
Level of Difficulty: Really Easy
Time to do repair: 1- 2 hours
Tools: Screw drivers, Socket set, Wrench set
Customer: Ronald from Meridian, ID

Water was leaking on to the floor.

Assembled the parts, put them into the machine, moved it back into place, started it up and it is running fine. Thanks for the good service, good parts and they arrived on time.

Help other customers find the most helpful instructions.

Were these instructions helpful?   

0 of 2 people found this instruction helpful

Parts Used:
Level of Difficulty: Really Easy
Time to do repair: Less than 15 mins
Tools: Nutdriver, Screw drivers
Customer: Joseph from Flower Mound, TX

Water leak

Once I got the washer top off, if was easy to see the water leak and with the parts, very to fix. The parts I ordered where received very quickly. Good service.

Help other customers find the most helpful instructions.

Were these instructions helpful?   

0 of 2 people found this instruction helpful

Parts Used:
Level of Difficulty: Really Easy
Time to do repair: 30 - 60 mins
Tools: Screw drivers, Socket set, Wrench (Adjustable)
Customer: John from Bethlehem, PA

Water leaking from left side of washer during fill cycles

Remove two screws to take off the front. Remove two bolts to loosen the top, slide it aside. Remove one hose clamp and take out injector valve and nozzle. Lube the new nozzle with soapy water, slide the valve in and re-insert into hose. I replaced the hose clamp, but it wasn't really necessary.

Bolt down the top and replace the front and screws.

I did move the machine and clean the inlet screens, just to make sure. It did improve the hot water flow.

Help other customers find the most helpful instructions.

Were these instructions helpful?   

0 of 2 people found this instruction helpful

Parts Used:
Level of Difficulty: Really Easy
Time to do repair: 30 - 60 mins
Tools: Nutdriver, Screw drivers, Socket set
Customer: James from Ventura, CA

Leaked during fill

Very helpful to have the parts diagram to see how to access the fill tube here on PartsSelect. Removed the two screws holding the front panel on and then undid the two hex head bolts so the lid could be tilted back. The previous repair stories posted here really helped in analyzing what to purchase. Only bought the rubber tube and injector nozzle. The plastic housing looked OK. Undid the hose clamp and out came the rubber tube. A little liquid soap on the outside and slid the tube into the housing, and hooked back the feed line. Ran the fill for a little bit to ensure the leak was gone. Re-installed the screws to attach the top and the front panel. For $20 in parts and shipping, solved the leak and machine is back in business. Thanks really helpful web site.

Help other customers find the most helpful instructions.

Were these instructions helpful?   

0 of 2 people found this instruction helpful

Parts Used:
Level of Difficulty: Easy
Time to do repair: 30 - 60 mins
Tools: Nutdriver, Screw drivers, Socket set
Customer: Joe from Damascus, OR

Washer leaked sometimes when filling

First, I read the stories posted on the partselect website which were very helpful.

Then I just repeated the procedure followed by others who had had the same problem, installed the new parts, and the machine was fixed.
Great idea to have this feature on your website.

Help other customers find the most helpful instructions.

Were these instructions helpful?   

46-53 of 53

Model Cross Reference

This part works with the following models:

PartSelect Number: PS11738878
Manufacturer Part Number: WP213015
Brand Model Number Description
MaytagA104Washer - Top Loading
MaytagA105Washer - Top Loading
MaytagA106Washer - Top Loading
MaytagA106SWasher - Residential
MaytagA107Washer - Top Loading
MaytagA107SWasher - Residential
MaytagA108Washer - Top Loading
MaytagA108SWasher - Residential
MaytagA110Washer - Top Loading
MaytagA112Washer - Top Loading
MaytagA15CAWasher
MaytagA15CMWasher
MaytagA15CTWasher
MaytagA16CAWasher
MaytagA16CMWasher
MaytagA16CTWasher
MaytagA17CAWasher
MaytagA17CMWasher
MaytagA17CTWasher
MaytagA180Washer - Top Loading
MaytagA181Washer - Top Loading
MaytagA182Washer - Top Loading
MaytagA183Washer - Top Loading
MaytagA18CAWasher
MaytagA18CMWasher
MaytagA18CTWasher
MaytagA190Washer - Top Loading
MaytagA1910Washer - Top Loading
MaytagA206Washer - Top Loading
MaytagA206SWasher - Top Loading