Install videos!
11738859-1-M-Whirlpool-WP210684-Rubber Foot Pad
Part Location Diagram of WP210684 Whirlpool Rubber Foot Pad
See part 8 in the diagram
Replacing your Maytag Washer Rubber Foot Pad
11738859-1-S-Whirlpool-WP210684-Rubber Foot Pad 360 view
( Grid squares measure 1x1 inch )
11738859-1-S-Whirlpool-WP210684-Rubber Foot Pad 11738859-2-S-Whirlpool-WP210684-Rubber Foot Pad 11738859-1-S-Whirlpool-WP210684-Rubber Foot Pad 360 view
Part Location Diagram of WP210684 Whirlpool Rubber Foot Pad Replacing your Maytag Washer Rubber Foot Pad
Customer Service Representative

Get in touch, we're here to help!

Monday to Saturday
8am - 9pm EST

customerservice@partselect.com

Rubber Foot Pad WP210684

 Fits your LAT9356AAQ!
★★★★★
★★★★★
1 Review

Rated by 5 customers 

Easy 

1- 2 hours 

Ratings submitted by customers like you who bought this part.

$ 15.24
  In Stock

Get this part fast! Average delivery time for in-stock parts via standard shipping: 1.8 days.

 Fits your LAT9356AAQ!
PartSelect Number PS11738859
Manufacturer Part Number WP210684
Manufactured by Whirlpool for Maytag, International, Jenn-Air, Amana
Product Description

Rubber Foot Pad Specifications

The leveling leg pad or foot pad fits over the leveling leg on your washing machine. The foot pad is designed to protect your floor and keep the washing machine level and in place. This foot pad is just over an inch in diameter. It is made entirely of rubber and is gray in color. This pad is intended for use with washers and some dryers. Many of our customers have rated this repair as very easy. To complete the repair, turn the old leg counter clockwise to remove it. Then, simply remove the old pad and replace it with the new one. Finally, re-attach the leg by turning clockwise. Ensure that the washer is level, and adjust the leg accordingly if it is not.
How Buying OEM Parts Can Save You Time and Money

How Buying OEM Parts Can Save You Time and Money

Part Videos

Replacing your Maytag Washer Rubber Foot Pad

Replacing your Maytag Washer Rubber Foot Pad
Back to Top
Troubleshooting
This part works with the following products:
Washer, Dryer, Washer Dryer Combo.
Part# WP210684 replaces these:
AP6005800, 2-10684, 210684, WP210684VP
Back to Top
Customer Reviews
Average Rating:
★★★★★
★★★★★
1 Review
4.0
Filter By Rating:
  • 5 Stars
    0
  • 4 Stars
    1
  • 3 Stars
    0
  • 2 Stars
    0
  • 1 Star
    0
Sort by:
  • 1
Search filter:
Clear Filter
Your search term must have 3 or more characters.
Keep searches simple. Use keywords, e.g. "leaking", "pump", "broken" or "fit".
Sorry, we couldn't find any existing reviews that matched. Try using some different or simpler keywords.
★★★★★
★★★★★
Brenda T - September 27, 2018
  Verified Purchase
Worked as expected.
The part was sent quickly. Very costly for such a small part.
  • 1
Back to Top
Customer Repair Stories
 Average Repair Rating: 2.6 / 5.0, 5 reviews. What's this?
Sort by:
  • 1
Search filter:
Clear Filter
Your search term must have 3 or more characters.
Keep searches simple. Use keywords, e.g. "leaking", "pump", "broken" or "fit".
Sorry, we couldn't find any existing installation instruction that matched.
Stripped leveler screw making impossible to level my washer
Put blocks under the washer where the leveling leg was needed and screwed the part into the washer. Then it was just a matter of moving the washer into place and leveling. Pretty easy.
Other Parts Used:
Adjustable Leveling Leg Rubber Foot Pad
  • Rebecca from Wylie, TX
  • Difficulty Level:
    Easy
  • Total Repair Time:
    15 - 30 mins
  • Tools:
    Wrench set
22 of 29 people found this instruction helpful.
Was this instruction helpful to you?
Thank you for voting!
Seal failure, leading to bearing failure
Not much to add to others' descriptions of the repair except for two things- one, the procedure for removing the front shroud on a stackable unit is somewhat different than what is described in the seal kit directions. The door switch assembly gets in the way; though the whole repair can be done by one person, it would be better (and safer) to have a second person helping at least during this part. The whole shroud is unwieldy, with two drain hoses attached, along with two dispenser hoses, the door switch/light, and the side & bottom mounting brackets, and it has to be eased out one step at a time. During the last part of this you will have to lift up the front of the dryer at the same time.

Second, our particular washer has a 90xxxx serial number. The bearings are Chinese-sourced, not the good NSK bearings. Though the listed bearing numbers are the same... the rear bearing is held in by a retainer that is permanently fixed into the outer tub. There is no easy way to drive the bearing forward, either, as the retainer covers nearly all the bearing outer shell. The chances are very high that the outer tub would be damaged beyond repair if the retainer or bearing was removed. Fortunately in this washer, the back bearing was still in reasonable shape and had some grease left; I was able to pop out the grease seal and re-pack it with wheel bearing grease. The front bearing & seal are replaced as others have described. The front bearing takes a majority of the load, so others may have similar wear.

This washer was only 3 1/2 years old; we bought six Maytag appliances at the same time, and four of the six have had major repair problems (two were cheaper to replace than repair). That, and the $678 replacement cost of the outer tub, explains why the Maytag repairman is so lonely...
Read less
Other Parts Used:
Rubber Foot Pad Lip Seal Kit
  • James from Chillicothe, IL
  • Difficulty Level:
    Very Difficult
  • Total Repair Time:
    More than 2 hours
  • Tools:
    Nutdriver, Pliers, Screw drivers, Socket set, Wrench (Adjustable)
23 of 27 people found this instruction helpful.
Was this instruction helpful to you?
Thank you for voting!
Warn out foot pads
Pried off old pads - used hammer to tap on new pads.

Locating replacement parts was the problem until I found partselect.com
Other Parts Used:
Rubber Leveling Leg Foot Pad Rubber Foot Pad
  • Dennis from Granada Hills, CA
  • Difficulty Level:
    Really Easy
  • Total Repair Time:
    Less than 15 mins
  • Tools:
    Pliers
2 of 4 people found this instruction helpful.
Was this instruction helpful to you?
Thank you for voting!
Bearings went out in the drum.
purchased the bearings at Napa auto parts for 16$. Over all it was a little difficult to get the bearings out and back in. Used a brass drift to drive them out and to seat them back in..
Other Parts Used:
BASE BRACE- CRO Lower Front Panel Clip Adhesive Tub to Cabinet / Plate Spring Plastic Washer BRIDGE- SH Rear Strut Kit - Set of 2 Struts Rubber Foot Pad Spinner Support and Seal Kit Foot, Front - Single Locking Nut Screw
  • Paddy from Ferndale, WA
  • Difficulty Level:
    A Bit Difficult
  • Total Repair Time:
    More than 2 hours
  • Tools:
    Nutdriver, Pliers, Screw drivers, Socket set, Wrench set
57 of 81 people found this instruction helpful.
Was this instruction helpful to you?
Thank you for voting!
Belt was hard and made a squeaking nosie, rubber pads were o good because of age.
First I disconnect the electrical power, 2nd disconnect the vent tube, 3rd removed the four screws on the back of the dryer, 4th removed the front panel and disconnect the wires for the door switch, 5th remove the cover that holds the drum inplace, 6th remove the belt, 7th vacum all parts to remove any lint and dirt from the inside of dryer, 8th reassemble the parts in the reverse order. this took me about 55 minutes from start to finish. The parts were right which made the job very easy. The rubber foot pads were easy, just remove the old ones and install the new ones. Thank you for the right parts.
Read less
Other Parts Used:
Rubber Leveling Leg Foot Pad Tumbler and Motor Belt Rubber Foot Pad
  • Coyote Custom Builders from Phelan, CA
  • Difficulty Level:
    Really Easy
  • Total Repair Time:
    30 - 60 mins
  • Tools:
    Nutdriver, Screw drivers
0 of 2 people found this instruction helpful.
Was this instruction helpful to you?
Thank you for voting!
  • 1
Back to Top
Questions and Answers

Ask our experts a question about this part and we'll get back to you as soon as possible!

2 questions answered by our experts.
Sort by:
  • 1
Search filter:
Clear Filter
Your search term must have 3 or more characters.
Keep searches simple. Use keywords, e.g. "leaking", "pump", "broken" or "fit".
Sorry, we couldn't find any existing answers that matched.Try using some different or simpler keywords, or submit your new question by using the "Ask a Question" button above!
Mike
December 22, 2019
Will part 210684 fit my Maytag model la510 which is quite old ( built in about 1980)
For model number La510
PartSelect logo
Hello Mike and thank you for writing. Yes, Part Number: PS11738859 is in the list of compatible items for your model. We hope this helps. Please contact us anytime.

Was this helpful?
Thank you for voting!
Mike
December 22, 2019
On my previous question about the leveling leg pads i forgot to mention that they are about one and one-half inches in diameter
For model number La510
PartSelect logo
Hello Mike and thank you for writing. That sounds right. We hope this helps. Please contact us anytime.

Was this helpful?
Thank you for voting!
  • 1
Back to Top
You May Also Need ?
Belt Kit
$41.21
  In Stock
Adjustable Leveling Leg
$18.46
  In Stock
Affresh Washing Machine Cleaner - 3 pack
$12.58
  In Stock
Affresh Dishwasher Cleaner Tablets - 6
$19.09
  In Stock
Produce Preserver Filter
$21.50
  In Stock
Affresh Cleaner
$19.09
  In Stock
Cooktop Cleaner
$17.74
  In Stock
Affresh Washing Machine Cleaner Tablets – 6 Count
$21.14
  In Stock
Back to Top
Model Cross Reference
This part works with the following models:
PartSelect Number: PS11738859
Manufacturer Part Number: WP210684
Brand
Model Number
Description
Maytag
601C
Dryer - Residential
Maytag
601W
Washer Dryer Combo - Residential
Maytag
602W
Dryer - Residential
Maytag
60W
Washer Dryer Combo - Residential
Maytag
61C
Dryer - Residential
Maytag
61W
Washer Dryer Combo - Residential
Maytag
6329
Washer - MAYTAG AUTOMATIC WASHER
Maytag
6349
Washer - MAYTAG AUTOMATIC WASHER
Maytag
6359
Washer - MAYTAG AUTOMATIC WASHER
Maytag
640C
Dryer - Residential
Maytag
640W
Dryer - Residential
Maytag
65C
Dryer - Residential
Maytag
66CB
Dryer - Gas
Maytag
67C
Dryer - Gas
Maytag
701C
Dryer - Residential
Maytag
70C
Dryer - Residential
Maytag
740C
Dryer - Residential
Maytag
741C
Dryer - Residential
Maytag
742C
Dryer - Residential
Maytag
75C
Dryer - Residential
Maytag
76CB
Dryer - Gas
Maytag
77C
Dryer - Gas
Maytag
A100S
Washer - Top Loading
Maytag
A101
Washer - Top Loading
Maytag
A102
Washer - Top Loading
Maytag
A102S
Washer - Top Loading
Maytag
A103
Washer - Top Loading
Maytag
A103S
Washer - Top Loading
Maytag
A104
Washer - Top Loading
Maytag
A105
Washer - Top Loading
Back to Top
Customer Service Representative

Get in touch, we're here to help!

Monday to Saturday
8am - 9pm EST

Contact Customer Service
Rubber Foot Pad
$ 15.24
  In Stock
✖
Stock Status
 In Stock

Item is in stock and will ship today if your order is placed before 4:00 PM Eastern Standard Time.

If your order is placed after 4:00 PM EST, the in stock items will ship on the next business day.

 On Order

Item is not in stock and usually ships 3-5 business days from the time you place your order.

 Special Order

Item is not in stock and usually ships 10-15 business days from the time you place your order.

 NLA - No Longer Available

This item is no longer being made by the manufacturer, and cannot be added to your shopping cart.