The timer controls most of the operations of the washer: water level, tub filling and emptying, length of cycles, and cycle setting sequences.
How Buying OEM Parts Can Save You Time and Money
Part Videos
Replacing your Maytag Washer Timer
Troubleshooting
This part works with the following products:
Washer.
Part# WP21001959 replaces these:
AP6005782, 21001959, 21001959R
Customer Repair Stories
Average Repair Rating: 3.8 / 5.0, 4 reviews.
What's this?
Sort by:
< Prev
1
Next >
Search filter:
Clear Filter
Your search term must have 3 or more characters.
Keep searches simple. Use keywords, e.g. "leaking", "pump", "broken" or "fit".
Sorry, we couldn't find any existing installation instruction that matched.
None ..
Watched the video twice .... followed the step by step instructions ... bing bang boom ... done in about 15 minutes. Very easy repair/replacements of the timing unit. Watch the video, you should have no problems.
Mark from NEW BRITAIN, CT
Difficulty Level:
Really Easy
Total Repair Time:
15 - 30 mins
Tools:
Screw drivers
2 of 2 peoplefound this instruction helpful.
Was this instruction helpful to you?
Thank you for voting!
would not change cycles
ordered new timer removed knobs front panel rear panel removed old timer pluged in new timer replaced panels knobs pluged power works like new no problem 30 t 4 0 minutes easy job!!!!
Lawrence from Jackson, AL
Difficulty Level:
Really Easy
Total Repair Time:
30 - 60 mins
Tools:
Pliers, Screw drivers, Socket set
1 personfound this instruction helpful.
Was this instruction helpful to you?
Thank you for voting!
Wash Cycle Quit Working - Replaced Timer
The instructions from others on this web site helped out greatly. Changing out the timer was quite straight forward. After removing the (3) screws on the panel cover, and the (2) holding the timer in place I simply unplugged the old cords, and plugged them in to the new timer. The only tricky part was removing the button skirt but a co
... Read moreuple of You Tube videos showed the proper technique. I used a pair of needle nose pliers to pull out the plastic piece in the back of the timer that was attached to the button skirt
Read less
Stephen from Minnetonka, MN
Difficulty Level:
Easy
Total Repair Time:
15 - 30 mins
Tools:
Screw drivers
17 of 25 peoplefound this instruction helpful.
Was this instruction helpful to you?
Thank you for voting!
the timer went out on the washer
I had to drill and strap a piece of strapping iron on because the new timer had a broken tab on it.
Ask our experts a question about this part and we'll get back to you as soon as possible!
2 questions answered by our experts.
Sort by:
< Prev
1
Next >
Search filter:
Clear Filter
Your search term must have 3 or more characters.
Keep searches simple. Use keywords, e.g. "leaking", "pump", "broken" or "fit".
Sorry, we couldn't find any existing answers that matched.Try using some different or simpler keywords, or submit your new question by using the "Ask a Question" button above!
Isabel
February 25, 2018
Hello my laundry isin´t work and a plomer ,tell me that i need the timer and in my country no there is.
For model number MAV2755AWW
Hello Isabel, thank you for your question. If the unit isn't starting at all I would recommend checking your water inlet valve, timer, Lid Switch Kit and pressure switch first. I hope this helps!
Was this helpful?
Thank you for voting!
Stephen
March 13, 2020
Water will not shut off, could it be the timer?
For model number MAV4757AWW
Hello Stephen, thank you for your question. The most common cause of the water not shutting off is the water valve or pressure switch. A good way to test this is to start a cycle and when the water is filling the tub pull the plug out of the wall to shut off power. If the water valve stops dispensing water the issue is probably the pressure switch PartSelect Number: PS2200077. If the water continues to come into the unit the valve is the issue and should be replaced, which is PartSelect Number: PS11738838. You can also test the valve with a multi meter to determine if it has failed. If both the valve and pressure switch are tested/replaced and the issue persists, the timer would be the next part to replace. I hope this helps.
Was this helpful?
Thank you for voting!
< Prev
1
Next >
✖
Ask a Question
Ask our experts a question on this part and we'll respond as soon as we can.
