Keep searches simple. Use keywords, e.g. "leaking", "pump", "broken" or "fit".
Sorry, we couldn't find any existing reviews that matched. Try using some different or simpler keywords.
★★★★★
★★★★★
JONNATHAN G - September 20, 2021
Verified Purchase
Working
The part came in less than a week and I had a quick response from Customer Service when I wrote them
★★★★★
★★★★★
Kirk P - September 4, 2020
Verified Purchase
Motor
Fit perfectly
★★★★★
★★★★★
Kyle D - August 13, 2020
Verified Purchase
Works great no noise
parts came fast couldnt be happier with it. Website had accurate pictures and a great parts list
★★★★★
★★★★★
Michael W - June 10, 2019
Verified Purchase
easy repair
part went right in but I ordered the wrong motor and it kept popping my fuse. ordered pump. put old motor in washer works great. need explanation for motor differences to be more apparent as to how to choose correct motor.
★★★★★
★★★★★
Scott P - March 6, 2019
Verified Purchase
Perfect!!!
Call the local appliance center they said that motors old and they don’t have it ,they did give me a part number I looked it up on parts select found the motor had it next day and installed it perfect awesome.
★★★★★
★★★★★
Michael F - November 13, 2018
Verified Purchase
Easy
Quick and easy install
< Prev
1
Next >
Customer Repair Stories
Average Repair Rating: 3.3 / 5.0, 13 reviews.
What's this?
Sort by:
< Prev
1
2
Next >
Search filter:
Clear Filter
Your search term must have 3 or more characters.
Keep searches simple. Use keywords, e.g. "leaking", "pump", "broken" or "fit".
Sorry, we couldn't find any existing installation instruction that matched.
Not spinning, not agateing, could here motor try to start but would trip the internal overload after a few seconds and had a hot motor smell or hot plastic
Got it outside layed it on its side and replaced the motor and belt thinking motor got very hot and heated belt, it was worn from age so replaced it at the same time, hooked water hose up to cold side to test, worked great. Wife very happy
Repaitmr was simple. Followed video instructions from web site. Problem I ordered wrong motor so it just blew my plugs fuse. Also needed pump. Changed motor to old motor installed new pump. Machine works great.
michael from SANTA ANA, CA
Difficulty Level:
Easy
Total Repair Time:
30 - 60 mins
Tools:
Nutdriver, Screw drivers, Socket set
1 personfound this instruction helpful.
Was this instruction helpful to you?
Thank you for voting!
Washer makeing loud noise
All I need to replace was the water pump and motor. All went very well no issues after viewing the video's. I was amazed how easy it was.
Replace the motor in 25 minutes, my repair guy said it was not worth the time , I got this motor for less than $150. And save my self over $600.00, this was incredible.
Nicholas from BROOKLYN, NY
Difficulty Level:
Very Easy
Total Repair Time:
15 - 30 mins
Tools:
Nutdriver, Socket set
5 of 6 peoplefound this instruction helpful.
Was this instruction helpful to you?
Thank you for voting!
Water Pump Failed
Obvious problem: belt destroyed. The plastic pulley on the motor was damaged beyond repair. Since you can't replace just the plastic pulley, you have to purchase another motor. The machine still would not spin. Checked the pump again. The bearings might be bad. Replaced pump; Success! washer works again. Total repair: belt $15.68, new pul
... Read moreley with motor $132.00, and new pump $80.00. Estimated cost to repair about $228.00. Time to troubleshoot. 1 hour, time to fix 1 hour; Total time in labor about 2 hours.
Removed the control panel, top and front panels to access the motor. Removed the motor and inspected. The motor looked fine. Leaned machine back and remove the brake cover following the directions posted by others on this website. Discovered grease and grime on the friction brake, which did not look right. The grease must have slung off
... Read moreof the transmission shaft. Wiped the brake clean with a dry rag and put machine back together. Machine did not run, motor only hummed. I replaced the motor only and the machine now works fine. My feeling is the grease caused the brake to stick and every time the motor started up, the sticking brake put a strain on the motor. Over time this cause the motor to burn up. Machine is only 6 years old. Sounds like a design flaw.
Read less
Ron from Norfolk, VA
Difficulty Level:
A Bit Difficult
Total Repair Time:
1- 2 hours
Tools:
Nutdriver, Socket set
26 of 28 peoplefound this instruction helpful.
Was this instruction helpful to you?
Thank you for voting!
The motor ovrheated,
I took the front pannel off just 2 scrwe was holdig the pannel,the motor was in ftont,4 bolt was holdig the moto,and it is very easy to change,
Dennis from Merritt Island, FL
Difficulty Level:
Easy
Total Repair Time:
1- 2 hours
Tools:
Socket set
16 of 19 peoplefound this instruction helpful.
Was this instruction helpful to you?
Thank you for voting!
One of the two bolts that holds the motor in place broke off and since the bolts are actually embedded in the motor I had to buy the whole motor rather then just a 25 cent bolt.
First I took the front shield off, then I took the motor off.
Elmer from Fort Campbell, KY
Difficulty Level:
Difficult
Total Repair Time:
1- 2 hours
Tools:
Pliers, Screw drivers, Socket set
18 of 37 peoplefound this instruction helpful.
Was this instruction helpful to you?
Thank you for voting!
broken motor pulley
i removed the plastic cover.then i disconnected the harnest.i then removed the 2 screws and took the motor out. i took a hack saw blade and made a mark in the old pulley. i then took a screw driver and put it in the crack and tapped on it and the old pulley fell apart. i then put on the new pulley and reconnect the motor. i then reconnect
... Read more the belt.my washer is working great.it was so easy and i save myself some money in the process.
Read less
leighton from staten island, NY
Difficulty Level:
A Bit Difficult
Total Repair Time:
30 - 60 mins
Tools:
Screw drivers, Socket set, Wrench (Adjustable)
62 of 76 peoplefound this instruction helpful.
Was this instruction helpful to you?
Thank you for voting!
motor pulley burn and belt too
I pull out the motor pulley and put the new one then put belt on. but looks like the water pump its bad and I will have to order from you. Your service its the best I ever had ordering and deliver A+++++
Ask our experts a question about this part and we'll get back to you as soon as possible!
15 questions answered by our experts.
Sort by:
< Prev
1
2
Next >
Search filter:
Clear Filter
Your search term must have 3 or more characters.
Keep searches simple. Use keywords, e.g. "leaking", "pump", "broken" or "fit".
Sorry, we couldn't find any existing answers that matched.Try using some different or simpler keywords, or submit your new question by using the "Ask a Question" button above!
Ben
August 28, 2017
Can I purchase the pulley minus the motor? Or is it a full package deal only? I only need a new pulley.
For model number MAV6000AWW
Hi Ben,
Thank you for your inquiry. You can only get the motor pulley with the whole motor. It is not sold separately. I hope this helps. Good luck with your repair.
20 people found this helpful.
Was this helpful?
Thank you for voting!
Iren
December 23, 2017
Can i purchase only the pulley for model # hav2558aww ( i don't need the motor )
For model number HAV2558AWW
Hello Iren, Thank you for your inquiry. The pulley is only supplied with the motor, it does not come separately. Hope this helps!
7 people found this helpful.
Was this helpful?
Thank you for voting!
Jen
January 7, 2018
Attempting to troubleshoot an issue with my washer...it seems that the motor is not moving during the agitation cycle. it is running for the spin cycle it seems. could you give me a clue if that is an issue with the motor itself, or do i need to look at something else first? it has been squeaking loudly when it brakes for some time as well...
For model number PAV2300AWW
Hello Jen, Thank you for your inquiry. I would check the following parts first: agitator auger and post assembly, drive belt, transmission pulley and bearing kit, agitator base, and the transmission. Hope this helps!
2 people found this helpful.
Was this helpful?
Thank you for voting!
Gary
December 19, 2018
On spin cycle tub starts turning with screeching sound. After a revolution or two motor shuts off and smokes. Removed belt, motor sometimes spins on it's own sometimes spins with a little help. Without a load when the motor spins, it spins fine.The drain pump turns freely but turns with some resistance.
once the brake is released the tub spins with ease. 1- is the drain pump supposed to spin free like a top or is slight resistance normal? 2- does this sound like a damaged motor. thanks in advance for any help. god bless you! garyn
For model number MAV7260BWW
Hi Gary, thank you for your question. No the drain pump should not spin freely, you should have resistance. You actually should not be trying to spin it manually if possible because that can sometimes burn out the motor inside of the pump. For screeching you might want to check your motor but you may also want to take a look at your transmission pulley kit and your transmission assembly itself. I hope that helps. Good luck with your repair.
2 people found this helpful.
Was this helpful?
Thank you for voting!
John
October 15, 2019
My Maytag washer stops while agitating. We had the control rebuilt, and put in a new lid switch. Sometimes it blows the breaker and sometimes it’s the machine fuse.Starts, fill with water but stops during agitation
For model number MAV975AWW
Hello John, thank you for writing. This is likely due to either a faulty Transmission Pulley and Bearing, part number PS2003651, or Motor with Pulley, part number PS11738839 for your model. Good luck with your repair!
2 people found this helpful.
Was this helpful?
Thank you for voting!
Jeff
February 25, 2020
How do you get the pulley off of the motor.
For model number Pav 2300 Aww
Hi Jeff,
Thank you for your question. The pulley comes attached to the motor. It is not available separately. We hope this helps. Thank you and have a great day.
1 person found this helpful.
Was this helpful?
Thank you for voting!
Vanessa
July 14, 2022
Can you buy the pulley with the motor.
For model number PAVT244AWw
Hello Vanessa, thank you for your question. Yes, the motor and the Pulley are one unit for part PS11738839. If you need help placing an order, customer service is open 7 days a week. Please feel free to give us a call. We look forward to hearing from you.
1 person found this helpful.
Was this helpful?
Thank you for voting!
Lee
July 30, 2018
My motor runs for spin but not for agitate. Does this motor reverse and if so which connections do what.
For model number LNC6764
Hi Lee,
Thank you for your question. If the washer is not agitating, there are some parts that you will need to check to see which ones are causing the issue. Here is a link from our website that you may reference on what parts to check, https://www.partselect.com/AdvancedModelSymptoms.aspx?ModelNum=LNC6764A71&mfgModelNum=&fkMfgID=1&ModelMasterID=146262&PID=34. Also, here is a link to a video from YouTube that you may reference on the motor, https://www.youtube.com/watch?v=XlaHSZFGzp0. I hope this helps. Thank you and have a great day!
Was this helpful?
Thank you for voting!
Dustin
February 11, 2022
Before I purchase the motor I had a question. The washer fills but does not agitate, I checked under the washer and the motor does not spin easily. Is the motor pulley supposed to spin freely or is there supposed to be a lot of resistance and could that be my issue?
For model number PAV3300AWW
Hello Dustin, Thank you for the question. The Pulley would have some resistance. It will only spin easy and freely when the motor is powered on and operating. We hope this helps!
Was this helpful?
Thank you for voting!
Joseph
April 18, 2022
Is motor copper or alum
For model number Mvw6230hw
Hello Joseph, thank you for your question. This motor is not made of copper. There are parts inside such as the field are made with copper, however the outer portion of the motor is not aluminum but a metal such as tin or a steel substrate. If you need help placing an order, customer service is open 7 days a week. Please feel free to give us a call. We look forward to hearing from you.
Was this helpful?
Thank you for voting!
< Prev
1
2
Next >
✖
Ask a Question
Ask our experts a question on this part and we'll respond as soon as we can.
Something went wrong. Please try again later.
Your Question Has Been Submitted!
Our experts will send you an email as soon as your question has been answered.
