Timer WP208292 | Official Whirlpool Part | Fast Shipping | PartSelect
Timer – Part Number: WP208292
Timer – Part Number: WP208292 Timer – Part Number: WP208292 Timer – Part Number: WP208292 Timer – Part Number: WP208292 https://partselectcom.azureedge.net/Schematics/Maytag/35652.gif

Timer

Product Description

Timer Specifications

The timer controls most of the operations of the washer: water level, tub filling and emptying, length of cycles, and cycle setting sequences.

How Buying OEM Parts Can Save You Time and Money

Troubleshooting

This part fixes the following symptoms:

Timer will not advance

This part works with the following products:

Washer.

This part works with the following brands:

Maytag.

Part # WP208292 replaces these:

208292.
Questions and Answers
Ask our experts a question on this part and we'll respond as soon as we can.
Customer Repair Stories
Average Repair Rating: 4.3 / 5.0, 3 reviews What's this?
Sort by:
Keep searches simple. Use keywords, e.g. "leaking", "pump", "broken" or "fit".
Greg from Charlotte, NC
Difficulty Level:
A Bit Difficult
Total Repair Time:
15 - 30 mins
Tools:
Nutdriver, Screw drivers
Parts Used:
WP208292
Spin cycle would not work leaving clothes wet.
Replaced the timer.

I set the arrow on the dial to "off"

Hardest part was removing and reinstalling the spring-loaded plastic knob on the dial.

Popped off the central disk, dropped the retaining spring clip with a screw driver and removed the spring assembly and dial from the timer shaft, in sequence. (Repeated this process to install, after new timer was mounted).

Two top screws hold the face plate and two hex nuts hold timer in the mointing.

the timer's lectrical plug and scocket hook up was simple.

I thought calibrating the new timer could be a problem but a permanet pin in the timer shaft points to the cycle (when installed) even when the arrow knob is removed.

Greg Jones, Charlotte N.C.
5 of 5 people found this instruction helpful.
Was this instruction helpful to you?
Dennis from Dickinson, ND
Difficulty Level:
Easy
Total Repair Time:
Less than 15 mins
Tools:
Nutdriver, Screw drivers
Parts Used:
WP208292
Spin cycle did not work always on the regular cycle
First I unplugged the machine to prevent me from getting electricuted.
Next I snapped the control knob cap off.
Removed clip that held knob on timer shaft.
Removed 2 inside phillips screws holding the control panel located on top.
I tilted panel forward enough to get my hand on timer.
I then used a 5/16 nut driver to remove the 2 screws attaching the timer to the panel.
Next I unplugged the wire harness.
The old timer is now ready to be discarded.
I assembled the new timer in the reverse order the old one was removed.
3 of 3 people found this instruction helpful.
Was this instruction helpful to you?
Linda from Crestview Hills, KY
Difficulty Level:
Really Easy
Total Repair Time:
Less than 15 mins
Tools:
Screw drivers, Socket set
Parts Used:
211605, WP208292
The timer was not working causing the washer to not cycle properly.
Pulled knob off timer. Removed four screws at the top of the piece holding the timer in place. Pulled the wires out of the fitting. Then reversed procedure to put back together.
2 of 8 people found this instruction helpful.
Was this instruction helpful to you?
Model Cross Reference

This part works with the following models:

PartSelect Number: PS11738800
Manufacturer Part Number: WP208292
Brand
Model Number
Description
Maytag
LAT7793AAL
Washer - Top Loading
Maytag
LAT7793AAW
Washer - Top Loading
Maytag
LAT7793ABL
Washer - Top Loading
Maytag
LAT7793ABW
Washer - Top Loading
Maytag
LAT9593AAL
Washer - Residential
Maytag
LAT9593AAW
Washer - Residential
Maytag
LAT9593ABL
Washer - Residential
Maytag
LAT9593ABW
Washer - Residential