Part Location Diagram of WP206680 Whirlpool Injector Hose with Air Gap
See part 20 in the diagram
Replacing your Maytag Washer Injector Hose with Air Gap
( Grid squares measure 1x1 inch )
Customer Service Representative

Get in touch, we're here to help!

Open until 12am EST

customerservice@partselect.com

Injector Hose with Air Gap WP206680

★★★★★
★★★★★
16 Reviews

Rated by 17 customers 

Really Easy 

30 - 60 mins 

Ratings submitted by customers like you who bought this part.

$ 62.80
  In Stock

Get this part fast! Average delivery time for in-stock parts via standard shipping: 1.8 days.

PartSelect Number PS11738785
Manufacturer Part Number WP206680
Manufactured by Whirlpool
Product Description

Injector Hose with Air Gap Specifications

This kit contains a top mounting style injector sleeve. It comes with an air gap as well. This part helps stop the contaminated water from being drawn back into the main water line.
How Buying OEM Parts Can Save You Time and Money

How Buying OEM Parts Can Save You Time and Money

Part Videos

Replacing your Maytag Washer Injector Hose with Air Gap

Replacing your Maytag Washer Injector Hose with Air Gap
Troubleshooting
This part fixes the following symptoms:
Leaking
This part works with the following products:
Washer.
This part works with the following products:
Maytag.
Part# WP206680 replaces these:
AP6005726, 2-6680, 2-6683, 206680, 206683
Back to Top
Customer Reviews
Average Rating:
★★★★★
★★★★★
16 Reviews
4.8
Filter By Rating:
  • 5 Stars
    13
  • 4 Stars
    2
  • 3 Stars
    1
  • 2 Stars
    0
  • 1 Star
    0
Sort by:
  • 1
  • 2
Sorry, we couldn't find any existing reviews that matched. Try using some different or simpler keywords.
  • 1
  • 2
Customer Repair Stories
 Average Repair Rating: 3.9 / 5.0, 17 reviews. What's this?
Sort by:
  • 1
  • 2
Sorry, we couldn't find any existing installation instruction that matched.
Washing machine was leaking water from the top area
Took off the bad part and replaced it with the new one. The instructions was easy to follow.
  • Paul from GRENOLA, KS
  • Difficulty Level:
    Very Easy
  • Total Repair Time:
    30 - 60 mins
  • Tools:
    Pliers, Screw drivers, Socket set
1 person found this instruction helpful.
Was this instruction helpful to you?
Thank you for voting!
Intermittent water leak at the air gap when filling.
First time this part was replaced on our 30+ year old Maytag washer. Remove the front panel by removing the two screws near the bottom and swinging the panel out and away from the machine. There are two metal spring-type clips that hold the top of the panel to the top (lid panel) of the washer. Remove two sheet metal screws holding the lid panel to the side panels at the front of the machine. Lid panel is hinged at the back. Lift and swing the lid panel up and against the wall so it does not swing completely backwards. Remove the Injector hose from the top of the tub by turning about a quarter turn and lifting away. Loosen the clamp holding the other end of the hose to the inlet valve at the back of the machine. Remove the old injector hose by pulling it free of the intake valve. Save the clamp to use on the new injector hose. Finally, remove the screw at the air gap to free the old injector hose. Reverse the steps to install the new hose. It is important that the plastic box on top of the air gap faces upward. On my machine the hose clamp screw heads interfered with the side of the machine preventing proper orientation of the air gap. If so, loosen the clamps and rotate them out of the way and re-tighten.
  • Mike from GARRETTSVILLE, OH
  • Difficulty Level:
    Really Easy
  • Total Repair Time:
    15 - 30 mins
  • Tools:
    Screw drivers, Socket set
2 of 2 people found this instruction helpful.
Was this instruction helpful to you?
Thank you for voting!
Washing Machine was leakinc
Replace part, Cant remember name of part. But the provided video clip was easy to follow and explained in easy terms what to do
  • Peter from ROCKVILLE, MD
  • Difficulty Level:
    Really Easy
  • Total Repair Time:
    15 - 30 mins
  • Tools:
    Nutdriver, Pliers, Screw drivers
1 person found this instruction helpful.
Was this instruction helpful to you?
Thank you for voting!
water was leaking from injector hose
Took old injector hose off, put new hose clamp on lower hose, was a little awkward tightening it, not much room, but took my time, really was not that hard to do, water sprays in tub much faster now, I have had washing machine 28 years, first major repair
Other Parts Used:
Hose Clamp Injector Hose with Air Gap
  • Stephen from NEW CUMBERLND, PA
  • Difficulty Level:
    Really Easy
  • Total Repair Time:
    30 - 60 mins
  • Tools:
    Pliers, Socket set
2 of 11 people found this instruction helpful.
Was this instruction helpful to you?
Thank you for voting!
Leaking air gap tube within water injector hose - replace entire injector hose kit
This is for replacement of the complete injector hose kit, item number PS11738785. (1) Run spin cycle to drain any water from the tub. (2) Unplug machine and pull out from wall about 6". It is not necessary to disconnect supply or drain hoses from the wall. (3) Remove two screws at bottom of front panel, swing panel out until it comes loose at the top; set aside. (4)Disconnect the top end of the fabric softener tube from the filler port in the lid. If you let this drop, a small amount of water may drain out. (5) Remove two screws inside the top front corners holding the top to the sides. Raise the top panel on its rear hinges; it will lean back out of the way and remain attached. You can now see the s-shaped injector hose that connects the water valve to the top of the tub, with a small clear plastic box in the middle that contains the air gap tube. You may be able to replace just the small air gap tube inside that box, about 3" long, by disconnecting the front section of the hose from the plastic box - I've done that successfully several times before, but this time the upstream hose was eroded inside and still allowed leakage after replacing the air gap tube, so I ordered and replaced the whole injector hose kit. (7) Remove one screw attaching the plastic box to the side panel. (8) Disconnect the upstream end of the hose from the valve body. You may need to replace the hose clamp there, which doesn't come with the kit. (9) The downstream end of the hose is held in the top rim of the tub by a plastic end fitting; turn the entire hose assembly clockwise - toward your right - about 90 degrees, and lift it out of the hole, and discard. (10) Reverse that step with the new hose; push the fitting down into the hole [it only fits one way, like a car's radiator cap] and rotate the assembly counter-clockwise. (11) Clamp the upstream end of the hose to the valve body, do not over-tighten and cut the hose. (12) Fasten the plastic box to the top of the side panel with the screw from step 7. (13) Lower the top panel into place and reattach the fabric softener hose to the filler port. (14) Plug in and run a brief fill cycle to test for leaks. If OK, run spin cycle to dump water and reduce weight of machine. (15) Reattach top panel at top two corners. (16) Reinstall front panel; holding the bottom out at a 45 degree angle, slide the top brackets under the front edge of the top panel, swing down, reinstall two screws at the bottom corners.
  • Doug from PERRY, KS
  • Difficulty Level:
    Easy
  • Total Repair Time:
    30 - 60 mins
  • Tools:
    Nutdriver, Pliers, Screw drivers
6 of 6 people found this instruction helpful.
Was this instruction helpful to you?
Thank you for voting!
Hose were old and worn. water was leaking threw.
Instead of replacing one damage hose, i decided to replace the whole piece. the second hose was old and i figure ill just take care of one problem now and prevent a future problem. it was as simple and quick, save me some money from hiring a repair man. it was also a learning experience.
  • carlos from norwalk, CA
  • Difficulty Level:
    Really Easy
  • Total Repair Time:
    15 - 30 mins
  • Tools:
    Pliers, Screw drivers, Socket set
3 of 4 people found this instruction helpful.
Was this instruction helpful to you?
Thank you for voting!
Air injector nozzle leaking
Watched your repair video.Then removed front panel. Removed nuts that retain top cover. Opened top and replaced hose.
  • Brian from Hope Valley, RI
  • Difficulty Level:
    Easy
  • Total Repair Time:
    Less than 15 mins
  • Tools:
    Nutdriver, Screw drivers, Socket set
1 of 2 people found this instruction helpful.
Was this instruction helpful to you?
Thank you for voting!
Water would drip from the upper left corner when filling
After reading about previous repairs on PartSelect, I figured there was a small hole in the Injector Hose. Ordering online was simple. It took three days to arrive since we really live in the boonies. It was easy to take the defective part off and put the new hose on. Except when the washer began to load, water sprayed everywhere! Huh? I took apart the Air Gap and determined that the one-way valve was put in on the wrong side of the apparatus. It was easy to put it back together right, however, and it worked fine thereafter. Seemed to have been a QC problem when they were assembled. It is working properly now.
  • Jim from Drummond, WI
  • Difficulty Level:
    Really Easy
  • Total Repair Time:
    15 - 30 mins
  • Tools:
    Nutdriver, Pliers
5 of 7 people found this instruction helpful.
Was this instruction helpful to you?
Thank you for voting!
Water leaking from bottom of machine
I had trouble initially because I could see that the inside of the machine was wet but could not get it to leak while I was watching. Finally while the machine was filling I put my hand over the fill opening in the tub and then I got plenty of water coming from the air gap in the injector hose. When I dismantled the injector hose and air gap, I could see that the rubber injector vale was bad. I orgered both a rubber injector and injector hose with air gap. I did this because I couldn't determine if the assembly came with the injector valve. It did so I returned the injector valve.
A word of caution. When I started filling the machine water gushed out the air gap. With a little experimenting with the air gap and injector valve, I determined the rubber injector valve was in backward. After reversing the vale, everything worked fine. This was a sealed package so I would have to say this came from the manufacturer wrong.
  • GARY from ILLIOPOLIS, IL
  • Difficulty Level:
    Really Easy
  • Total Repair Time:
    15 - 30 mins
  • Tools:
    Nutdriver
21 of 22 people found this instruction helpful.
Was this instruction helpful to you?
Thank you for voting!
Water leak from the top of the washing machine.
1. Unplug machine.
2. Removed front cover,(2 screws).
3. Removed top cover,(2 screws).
4. Remove hose at top (twist lock), loosen clap holding hose at bottom.
5. Reverse procedure, attach clamp at bottom, attach hose at top(twist lock).
6. Plug in machine, turn on (fill), check for leaks.
7. Re-attach top
  • Dan from Houston, TX
  • Difficulty Level:
    Really Easy
  • Total Repair Time:
    15 - 30 mins
  • Tools:
    Pliers, Screw drivers, Socket set
4 of 5 people found this instruction helpful.
Was this instruction helpful to you?
Thank you for voting!
  • 1
  • 2
Questions and Answers

Ask our experts a question about this part and we'll get back to you as soon as possible!

3 questions answered by our experts.
Sort by:
  • 1
Sorry, we couldn't find any existing answers that matched.Try using some different or simpler keywords, or submit your new question by using the "Ask a Question" button above!
Ralph Ormsbee
December 12, 2018
What makes this back up and over flow
For model number A105
PartSelect logo
Hello Ralph, Thank you for the question. In most cases it becomes clogged by debris. I suggest removing it and cleaning it out. Thank you for your inquiry, good luck with this repair!

6 people found this helpful.

Was this helpful?
Thank you for voting!
WIL
November 22, 2019
I bought injector valve housing, the siphon break connector & rubber injector valve, yet when replacing these parts i did use the new plastic siphon injector valve gage/ housing because the plastic ribbed section of old one was broken & i feared it was the cause of the old rubber injector valve to split - could that be the cause of random intermittent leaking at this spot?If yes, what is suggested fix? the machine also seems to be leaking elsewhere...?? where would you suggest looking? - any troubleshooting info you might share is very appreciated! i thank you in advance for sharing your knowledge.
For model number LA506
PartSelect logo
Hello Wil, thank you for inquiring. You will want to replace the Injector Tube Seal, part number PS11738906 for your washer. You may also want to consider the Plastic Injector Nozzle, part number PS11738878, and the Injector Tube, part number PS11738907. Good luck with your repair!

1 person found this helpful.

Was this helpful?
Thank you for voting!
Dana
July 30, 2021
Will your injector hose with air gap work on my washer?
For model number Maytag 9200
PartSelect logo
Hello Dana, Thank you for your inquiry. We have researched your model and confirm that this is the complete kit available for the injector hoses. Good luck with your repair.

1 person found this helpful.

Was this helpful?
Thank you for voting!
Related Parts:
  • 1
Model Cross Reference
This part works with the following models:
PartSelect Number: PS11738785
Manufacturer Part Number: WP206680
Brand
Model Number
Description
Maytag
A104
Washer - Top Loading
Maytag
A112
Washer - Top Loading
Maytag
A183
Washer - Top Loading
Maytag
A190
Washer - Top Loading
Maytag
A211
Washer - Top Loading
Maytag
A211S
Washer - Top Loading
Maytag
A212
Washer - Top Loading
Maytag
A212S
Washer - Residential
Maytag
A23CA
Washer
Maytag
A23CDL
Washer - Commercial
Maytag
A23CDW
Washer - Commercial
Maytag
A23CSL
Washer
Maytag
A23CSW
Washer
Maytag
A23CT
Washer
Maytag
A24CA
Washer
Maytag
A25CA
Washer
Maytag
A25CAE
Washer
Maytag
A25CM
Washer
Maytag
A25CME
Washer
Maytag
A25CS
Washer
Maytag
A25CT
Washer
Maytag
A26CA
Washer
Maytag
A26CAE
Washer
Maytag
A26CD
Washer
Maytag
A26CDC
Washer
Maytag
A282
Washer - Top Loading
Maytag
A312
Washer - Top Loading
Maytag
A312S
Washer - Residential
Maytag
A382
Washer - Top Loading
Maytag
A390
Washer - Top Loading
Customer Service Representative

Get in touch, we're here to help!

Open until 1am EST

Contact Customer Service