Quick Question!

Have you ever purchased from PartSelect.com before?

11738768-1-S-Whirlpool-WP200835-BEARING, BRAKE ROTOR
11738768-1-S-Whirlpool-WP200835-BEARING, BRAKE ROTOR 11738768-2-S-Whirlpool-WP200835-BEARING, BRAKE ROTOR 11738768-3-S-Whirlpool-WP200835-BEARING, BRAKE ROTOR https://www.partselect.com/Schematics/Maytag/37314.gif


Your Price

Order within the next 8 hrs and your part ships today!
Get this part fast. Average delivery time via standard shipping: 1.8 days.

PartSelect Number PS11738768
Manufacturer Part Number WP200835
Manufactured by Whirlpool

This part works with the following brands: Maytag, International, Jenn-Air.

This part works with the following products: Washer, Washer Dryer Combo.

This part fixes the following symptoms:

  • Noisy.

Questions & Answers

Ask our experts a question on this part and we'll respond as soon as we can.

Installation Instructions Provided by PartSelect customers like you.

Average Repair Rating: 2.0 / 5.0, 2 reviews What's this?
1-2 of 2

112 of 155 people found this instruction helpful

Parts Used:
Level of Difficulty: A Bit Difficult
Time to do repair: More than 2 hours
Tools: Nutdriver, Pliers, Screw drivers, Socket set, Wrench (Adjustable), Wrench set
Customer: John from Spring Valley, CA

No spin. Pump working. Smell of burning rubber.

I determined that the spin bearing was bad and decided to replace the brake too. Placed the machine on its side and then removed the rubber cap, v-belt, screw, drive lug and pulley. Then used a chain-vise grip to turn the brake off with the aid of a 3 foot long pipe extender for leverage. Blocked up the tub to align the transmission and installed the new spin bearing, brake, pulley and drive lug. Adjusted the drive lug position to contact the ccw motion of the pulley at the point when I could just feel the brake pressure. Installed the screw and rubber cap. Replaced the drive belts. Tested and all works. Halleluah!

Help other customers find the most helpful instructions.

Were these instructions helpful?   

10 of 14 people found this instruction helpful

Parts Used:
Level of Difficulty: A Bit Difficult
Time to do repair: More than 2 hours
Tools: Nutdriver, Screw drivers
Customer: Carl from Hollis, NH

Weak agitation cycle

Agitation cycle was rather weak, and wife reported a strange sound and smell (burning belt). Replaced the drive belt (no better behavior). Removed the drive pulley, checked the bearing (with all the grease removed, definite clicking when spinning the bearing). Replaced the bearing. (still no better behavior). Took off the motor and cleaned the mount, including re-lubricating with silicone grease, and checked the springs. (still no better behavior). Did some research online and took a closer look at the drive pulley lug. It seems that I put the lug back incorrectly, forcing the pulley up too tightly so it could not spin back down the shaft. Once I put it back on correctly (I think), the agitation problem seemed to be fixed. So, it is likely that replacing the drive belt and/or bearing solved the problem, but that was masked due to my putting the lug on incorrectly. DIYers beware.

Help other customers find the most helpful instructions.

Were these instructions helpful?   

1-2 of 2

Model Cross Reference

This part works with the following models:

PartSelect Number: PS11738768
Manufacturer Part Number: WP200835
Brand Model Number Description
MaytagA100SWasher - Top Loading
MaytagA101Washer - Top Loading
MaytagA102Washer - Top Loading
MaytagA102SWasher - Top Loading
MaytagA103Washer - Top Loading
MaytagA103SWasher - Top Loading
MaytagA104Washer - Top Loading
MaytagA105Washer - Top Loading
MaytagA106Washer - Top Loading
MaytagA106SWasher - Residential
MaytagA107Washer - Top Loading
MaytagA107SWasher - Residential
MaytagA108Washer - Top Loading
MaytagA108SWasher - Residential
MaytagA110Washer - Top Loading
MaytagA112Washer - Top Loading
MaytagA180Washer - Top Loading
MaytagA181Washer - Top Loading
MaytagA182Washer - Top Loading
MaytagA183Washer - Top Loading