11738699-1-M-Whirlpool-WP16897-Lower Bearing
Whirlpool/Whirlpool_Thumb/KYQ28YFF.gif
See part 2 in the diagram
( Grid squares measure 1x1 inch )

Get in touch, we're here to help!

Open until 12am EST

customerservice@partselect.com

Lower Bearing

★★★★★
★★★★★
1 Review

Rated by 3 customers 

Easy 

30 - 60 mins 

Ratings submitted by customers like you who bought this part.

$ 7.04   In Stock

Get this part fast! Average delivery time for in-stock parts via standard shipping: 1.8 days.

PartSelect Number PS11738699
Manufacturer Part Number WP16897
Manufactured by Whirlpool
You May Also Need?
Retaining Ring
$8.68
$8.68
  In Stock
Worm Gear
$43.62
$43.62
  In Stock
Front Bearing
$7.81
$7.81
  In Stock
Rear Bearing
$7.81
$7.81
  In Stock
Worm Following Gear
$17.67
$17.67
  In Stock
Hub Gear
$21.87
$21.87
  In Stock
Product Description

Lower Bearing Specifications

Used on Stand Mixers.
How Buying OEM Parts Can Save You Time and Money play video

How Buying OEM Parts Can Save You Time and Money

Troubleshooting
This part works with the following products:
Mixer.
This part works with the following products:
KitchenAid, Whirlpool.
Part# WP16897 replaces these:
AP6005647, 16897, 4176136
Questions and Answers

Be the first to ask our experts a question about this part!

Back to Top
Customer Repair Stories
 Average Repair Rating: 3.6 / 5.0, 3 reviews. What's this?
Sort by:
Search filter:
Clear Filter
Your search term must have 3 or more characters.
Keep searches simple. Use keywords, e.g. "leaking", "pump", "broken" or "fit".
Sorry, we couldn't find any existing installation instruction that matched.
mixer does not mix 4 cups of flour with 6 eggs very easily
sat on the kitchen table and with a screwdriver started to disasemble the mixer,hardest part was taking snap ring off (easy after you buy snap ring pliers)as gears were lifted off noticeable wearing was present on all parts. the bearing housing on the gearcase was broken lose, the only major expense. the other parts are not expensive so i decided to renew all parts. glad i did felt proud of myself when job was done. would do it again Joe
Other Parts Used:
Gearcase Housing with Gasket Transmission Gasket Worm Following Gear Lower Gear Case - Empire Red GEAR Hub Gear
  • joe from monaca, PA
  • Difficulty Level:
    Really Easy
  • Total Repair Time:
    15 - 30 mins
  • Tools:
    Screw drivers
17 of 42 people found this instruction helpful.
Was this instruction helpful to you?
Thank you for voting!
Planetary Pinion Gear Assembly had dropped down
The repair was easy, I only had to order new gear assembly parts and to replace the associated worn parts (shaft, pin, and gears).
Other Parts Used:
Hub Gear Worm Following Gear Retaining Pin
  • Karl from Hammond Ranch, CA
  • Difficulty Level:
    Easy
  • Total Repair Time:
    30 - 60 mins
  • Tools:
    Screw drivers, Socket set, Wrench set
1 person found this instruction helpful.
Was this instruction helpful to you?
Thank you for voting!
Bad control switch, striped worm follower gear.
Removed 2 screws holding the switch unplugged the one at a time.
opened the gear box cover 4 Philip screws, cleaned out the grease
removed the pinion gear, removed pin, removed the planet gear assembly replaced gears in reversed order greased it up put gear cover back on and tested worked great.
Other Parts Used:
Worm Following Gear Thrust Bearing Kit
  • Bruce from EUREKA, CA
  • Difficulty Level:
    Easy
  • Total Repair Time:
    30 - 60 mins
  • Tools:
    Pliers, Screw drivers
1 person found this instruction helpful.
Was this instruction helpful to you?
Thank you for voting!
Back to Top
Customer Reviews
Average Rating:
★★★★★
★★★★★
1 Review
5.0
Filter By Rating:
  • 5 Stars
    1
  • 4 Stars
    0
  • 3 Stars
    0
  • 2 Stars
    0
  • 1 Star
    0
Sort by:
Search filter:
Clear Filter
Your search term must have 3 or more characters.
Keep searches simple. Use keywords, e.g. "leaking", "pump", "broken" or "fit".
Sorry, we couldn't find any existing reviews that matched. Try using some different or simpler keywords.
★★★★★
★★★★★
JUAN E M - July 4, 2018
  Verified Purchase
GREAT
GREAT ON TIME
Model Cross Reference
This part works with the following models:
PartSelect Number: PS11738699
Manufacturer Part Number: WP16897
Brand
Model Number
Description
KitchenAid
3K45SS
Mixer
KitchenAid
4K45SS
Mixer
KitchenAid
4K45SS7OB0
Mixer
KitchenAid
4K45SS7WH0
Mixer
KitchenAid
4K45SSDWH-1
Mixer
KitchenAid
4K45SSWH-1
Mixer
KitchenAid
4KB25G1XBU3
Mixer
KitchenAid
4KB25G1XBU5
Mixer
KitchenAid
4KB25G1XBY5
Mixer
KitchenAid
4KB25G1XCO5
Mixer
KitchenAid
4KB25G1XER3
Mixer
KitchenAid
4KB25G1XER5
Mixer
KitchenAid
4KB25G1XGA5
Mixer
KitchenAid
4KB25G1XMC5
Mixer
KitchenAid
4KB25G1XMY5
Mixer
KitchenAid
4KB25G1XOB3
Mixer
KitchenAid
4KB25G1XOB5
Mixer
KitchenAid
4KB25G1XTG3
Mixer
KitchenAid
4KB25G1XTG5
Mixer
KitchenAid
4KB25G1XWW3
Mixer
KitchenAid
4KB25G1XWW5
Mixer
KitchenAid
4KD2661XMC3
Mixer
KitchenAid
4KG25G0XMC4
Mixer
KitchenAid
4KG25G0XWH4
Mixer
KitchenAid
4KG25G7XER4
Mixer
KitchenAid
4KG25G7XOB4
Mixer
KitchenAid
4KG25G7XSL4
Mixer
KitchenAid
4KG25G7XWH4
Mixer
KitchenAid
4KG25H3XER5
Mixer
KitchenAid
4KG25H3XOB5
Mixer
Back to Top

Get in touch, we're here to help!

Open until 1am EST

Contact Customer Service
Lower Bearing
$ 7.04   In Stock
✖
Stock Status
 In Stock

Item is in stock and will ship today if your order is placed before 4:00 PM Eastern Standard Time.

If your order is placed after 4:00 PM EST, the in stock items will ship on the next business day.

 On Order

Item is not in stock and usually ships 3-5 business days from the time you place your order.

 Special Order

Item is not in stock and usually ships 10-15 business days from the time you place your order.

 NLA - No Longer Available

This item is no longer being made by the manufacturer, and cannot be added to your shopping cart.

Close