Maytag/Maytag_Thumb/21390.gif
See part NI in the diagram
( Grid squares measure 1x1 inch )

Get in touch, we're here to help!

Open until 10PM EST

customerservice@partselect.com

Ice Maker Auger and Crusher Blade Assembly

★★★★★
★★★★★
6 Reviews
$ 218.98   On Order

Get this part fast. Average delivery time via standard shipping: 1.8 days.

PartSelect Number PS11738609
Manufacturer Part Number WP12740302
Manufactured by Whirlpool
Product Description

Ice Maker Auger and Crusher Blade Assembly Specifications

This is the replacement ice maker auger and crusher blade assembly for your refrigerator. It is approximately 15 inches long and 7 inches wide. The ice maker auger sits within the ice maker assembly and rotates to push the ice from ice container into the dispenser chute. If your ice maker bucket is full, but ice is not being dispensed, it is an indication that the auger is damaged. Be sure to disconnect power from the refrigerator before you repair the auger. This part is sold individually and is an authentic OEM part sourced directly from the manufacturer.

How Buying OEM Parts Can Save You Time and Money

Troubleshooting
This part fixes the following symptoms:
Ice maker won’t dispense ice | Ice maker not making ice
This part works with the following products:
Refrigerator.
This part works with the following products:
Amana, Admiral, Maytag, Kenmore.
Part# WP12740302 replaces these:
AP6005559, 12740302, 67003350, 67612-1, R0156803
Questions and Answers

We're sorry, but our Q&A experts are temporarily unavailable.
Please check back later if you still haven't found the answer you need.

2 questions answered by our experts.
    Sort by:
    Sorry, we couldn't find any existing answers that matched.Try using some different or simpler keywords, or submit your new question by using the "Ask a Question" button above!
    Alfred
    September 5, 2017
    The ice auger came off of the icemaker helix end cap and i can't get it to attach to the end cap and back into the hole in back of ice bucket.
    For model number MSD2651HEB
    Hi Alfred, Thank you for your inquiry. A customer actually wrote in with a set of instructions on how to do this: "Removed the four hex screws from the auger system on the old ice bucket with a socket wrench. Removed the old Helix end cap from the auger system and replaced with the new. Literally just slips on the auger. Reinstalled auger system back onto the new ice bucket. Total time not even five minutes." That is how you would install the auger to the cap and put it back into place. Good luck with your repair.

    7 people found this helpful.

    Was this helpful?
    Thank you for voting!
    Jeff
    February 27, 2020
    My ice maker is working fine now that i put in your new parts. The ice crusher blade is starting to rust. Is it possible to just replace the ice crusher blade?
    For model number 25352644300
    Hi Jeff, Thank you for your question. The part number listed under your model number for the crusher blade is PS12728804. To place an order for the part you may order it either online, by visiting our live chat sessions, Monday to Friday from 8AM to 4PM EST, or by calling our customer service line at 1-888-738-4871 and anyone will be happy to assist you. We hope this helps. Thank you and have a great day.

    1 person found this helpful.

    Was this helpful?
    Thank you for voting!
      Part Videos

      Replacing your Amana Refrigerator Ice Maker Auger and Crusher Blade Assembly

      Customer Repair Stories
       Average Repair Rating: 4.3 / 5.0, 14 reviews. What's this?
      Sort by:
      Sorry, we couldn't find any existing installation instruction that matched.
      Ice Dispenser had jammed up and become inoperative
      The parts discription was a bit vague and I wasn't sure exactly what I was ordering, but I received everything I needed and it works fine. The combination screw conveyor/ice crusher came in one piece. The ice cube bin is a plastic assembly that snaps apart. I used a wide blade screw driver carefully to facilitate assembly/disassembly. Once you have it apart the old converyor slips out and the new one slides in. Do not remove the two screws that hold the new assembly together. You need a phillips scredriver to take out two of the screws from the old assembly and put in the new one. That is, there are four screws and you need to trasfer two of them. Everything now works fine.
      • James from Robinson, TX
      • Difficulty Level:
        Easy
      • Total Repair Time:
        15 - 30 mins
      • Tools:
        Screw drivers
      • Parts Used:
        WP12740302
      40 of 47 people found this instruction helpful.
      Was this instruction helpful to you?
      Thank you for voting!
      the auger was bent away from the cap and ice bucket was cracked
      i had a serviceman look at it and he said it needed 6 parts, so i went to parts select and found the parts that i needed and i only needed 2 parts, the icemaker auger assembly and the ice bucket. It is working just like new again!!! thank you parts select, order on one day and recieved it the next day now thats what i call very fast service and shipping. If i should ever need parts for anything else parts select is the place i will go to. thank you again
      carol
      quincy il
      • Carol S. from Quincy, IL
      • Difficulty Level:
        Really Easy
      • Total Repair Time:
        Less than 15 mins
      • Tools:
      • Parts Used:
        WP67005959, WP12740302
      29 of 630 people found this instruction helpful.
      Was this instruction helpful to you?
      Thank you for voting!
      The crushed ice agitator kept slipping out of the bracket.
      With the repair parts ordered and received from PartsSelect.com, I was able to install a new Ice Bucket and the crushed ice agitator assembly. This simple repair has the refrigerator dispencing ice like new.
      • Charles from Plano, TX
      • Difficulty Level:
        Really Easy
      • Total Repair Time:
        Less than 15 mins
      • Tools:
        Nutdriver
      17 of 21 people found this instruction helpful.
      Was this instruction helpful to you?
      Thank you for voting!
      The icemaker assebly would go off track
      I removed the front cover--just popped off with no trouble. Removed 2 screws at the bottom. Slid the broken part out and put the new one in place. Put in the two screws, replaced the fron cover AND Done!!!
      BTW I am a 65 year old woman and the icemaker is like new.
      • Donna from The Villages, FL
      • Difficulty Level:
        Really Easy
      • Total Repair Time:
        Less than 15 mins
      • Tools:
        Pliers
      • Parts Used:
        WP12740302
      7 of 7 people found this instruction helpful.
      Was this instruction helpful to you?
      Thank you for voting!
      Fridge missing agitator assembly and ice bucket.
      While ordering the assembly, I had thought that the ice bucket was included but it wasn't. So I ordered the ice bucket afterwards. Maybe a little more clarity as far as what parts come in the whole assembly would save some time. All in all, the agitator was very easy to install, along with the ice bucket. After securing the agitator to the existing assembly with two screws, the ice bucket slipped right into place. Easy to install.
      • Ron from Deerfield, IL
      • Difficulty Level:
        Easy
      • Total Repair Time:
        15 - 30 mins
      • Tools:
        Nutdriver
      • Parts Used:
        WP12740302
      7 of 8 people found this instruction helpful.
      Was this instruction helpful to you?
      Thank you for voting!
      Auger not dispensing ice, motor working properly
      Firts checked the parts received werer correct for the repair and the correct part numbers ordered. Then removed the ice bucket with the auger in bottom. Emptied ice from original bucket auger assembly. Checked out the removeal of the face cover for the bucket auger and removed it from clips that held it in place. Checked the specifications of the old ice bucket compaired to the new parts. Installed the aurger assembly into the new ice bucket and removed the two screws from the old unit to use in secure the auger assembly in the new bucket. The only tool needed was a 1/4 inch nut driver. Installed the face place on the new ice bucket auger assembly and tested the fit in the freezer. Ran test of the auger assembly without ice to ck for any misinstlled parts. Refilled the ice bucket with ice and tested with ice to complete the repair.
      • Michael from Madison, AL
      • Difficulty Level:
        Easy
      • Total Repair Time:
        15 - 30 mins
      • Tools:
        Nutdriver
      • Parts Used:
        WP67005959, WP12740302
      7 of 11 people found this instruction helpful.
      Was this instruction helpful to you?
      Thank you for voting!
      Ice Maker Auger
      Wow! less Than 15 mins to install, called partSelect and within two days the Auger arrived and with handy socket it was done!
      • Marshall from Marrero, LA
      • Difficulty Level:
        Really Easy
      • Total Repair Time:
        Less than 15 mins
      • Tools:
        Socket set
      • Parts Used:
        WP12740302
      3 of 4 people found this instruction helpful.
      Was this instruction helpful to you?
      Thank you for voting!
      crushed ice agitator assy making loud noise
      removed the old one and installed the new one.
      • Gary from Flippin, AR
      • Difficulty Level:
        Really Easy
      • Total Repair Time:
        30 - 60 mins
      • Tools:
        Screw drivers
      • Parts Used:
        WP67006006, WP12740302
      3 of 5 people found this instruction helpful.
      Was this instruction helpful to you?
      Thank you for voting!
      Ice Auger Not Working
      Removed two screws on original ice bucket auger front panel-removed old ice auger assembly from old ice bucket and installed new auger assembly in new ice basket.Replaced ice auger/bucket front panel with the two screws and we now have a working ice dispensing unit and uncracked ice bucket
      • Robert from IndianHead Park, IL
      • Difficulty Level:
        Really Easy
      • Total Repair Time:
        Less than 15 mins
      • Tools:
        Socket set
      • Parts Used:
        WP12740302, WP10111905
      2 of 3 people found this instruction helpful.
      Was this instruction helpful to you?
      Thank you for voting!
      Ice would not come through door, troubleshot and determined bale mechanism wasn't turning properly.
      Removed old agitator unit - 4 nut-head screws removed, and installed new agitator and screws aligned easily.
      • Howard from Montoursville, PA
      • Difficulty Level:
        Really Easy
      • Total Repair Time:
        Less than 15 mins
      • Tools:
        Nutdriver
      • Parts Used:
        WP12740302
      2 of 3 people found this instruction helpful.
      Was this instruction helpful to you?
      Thank you for voting!
      Customer Reviews
      Average Rating:
      ★★★★★
      ★★★★★
      6 Reviews
      4.3
      Filter By Rating:
      • 5 Stars
        5
      • 4 Stars
        0
      • 3 Stars
        0
      • 2 Stars
        0
      • 1 Star
        1
        Sort by:
        Sorry, we couldn't find any existing reviews that matched. Try using some different or simpler keywords.
          Model Cross Reference
          This part works with the following models:
          PartSelect Number: PS11738609
          Manufacturer Part Number: WP12740302
          Brand
          Model Number
          Description
          Admiral
          19902-0A
          Refrigerator - REFRIGERATOR
          Admiral
          19903-0A
          Refrigerator - REFRIGERATOR
          Admiral
          19922-0A
          Refrigerator - REFRIGERATOR
          Admiral
          19922-7A
          Refrigerator - REFRIGERATOR
          Admiral
          19923-0A
          Refrigerator - REFRIGERATOR
          Admiral
          19923-7A
          Refrigerator - REFRIGERATOR
          Amana
          1999A
          Refrigerator
          Amana
          1999A-P1193906WL
          Refrigerator - SIDE BY SIDE REFRIGERATOR
          Amana
          1999W
          Refrigerator
          Amana
          1999W-P1193906WW
          Refrigerator - SIDE BY SIDE REFRIGERATOR
          Maytag
          22752
          Refrigerator - REFRIGERATOR
          Maytag
          22753
          Refrigerator - REFRIGERATOR
          Admiral
          22922-0A
          Refrigerator - REFRIGERATOR
          Admiral
          22922-7A
          Refrigerator - REFRIGERATOR
          Admiral
          23902-0A
          Refrigerator - REFRIGERATOR
          Admiral
          23903-0A
          Refrigerator - REFRIGERATOR
          Admiral
          23922-0A
          Refrigerator - REFRIGERATOR
          Admiral
          23922-7A
          Refrigerator - REFRIGERATOR
          Admiral
          23923-0A
          Refrigerator - REFRIGERATOR
          Admiral
          23923-7A
          Refrigerator - REFRIGERATOR
          Maytag
          24712
          Refrigerator - REFRIGERATOR
          Admiral
          24912-0A
          Refrigerator - REFRIGERATOR
          Admiral
          24912-0B
          Refrigerator - REFRIGERATOR
          Admiral
          24912-0D
          Refrigerator - REFRIGERATOR
          Admiral
          24922-0A
          Refrigerator - REFRIGERATOR
          Admiral
          24922-7A
          Refrigerator - REFRIGERATOR
          Amana
          2599A
          Refrigerator
          Amana
          2599A-P1190419WL
          Refrigerator - SIDE BY SIDE REFRIGERATOR
          Amana
          2599W
          Refrigerator
          Amana
          2599W-P1190419WW
          Refrigerator - SIDE BY SIDE REFRIGERATOR

          Get in touch, we're here to help!

          Open until 10PM EST

          Contact Customer Service