Keep searches simple. Use keywords, e.g. "leaking", "pump", "broken" or "fit".
Sorry, we couldn't find any existing reviews that matched. Try using some different or simpler keywords.
★★★★★
★★★★★
Marla Q - 27 days ago
Verified Purchase
Exactly what I needed
Brand new part that went in smoothly. Thank you for all the diagrams and instructions you include with all your parts.
★★★★★
★★★★★
SCOTT S - November 24, 2023
Verified Purchase
Great part
The part was exact fit easy install
★★★★★
★★★★★
Richard T - November 8, 2023
Verified Purchase
Works perfectly!
We fixed our fridge by ourselves! Very easy / found installation video on YouTube. This was a great result!
★★★★★
★★★★★
Harry R - October 20, 2023
Verified Purchase
Easier than expected, part was perfect
Video on installation was a great help. Made the project a breeze
★★★★★
★★★★★
Dominic B - April 28, 2023
Verified Purchase
Easy correct part
The part came complete unbroken was easy to install and was the correct part.
★★★★★
★★★★★
Randy O - December 26, 2022
Verified Purchase
Easy fix
The correct part arrived pretty quick and the repair was easy. Back in business
★★★★★
★★★★★
Barry M - December 23, 2022
Verified Purchase
Easy to install.
Prompt delivery. Part was easy to install and fit perfectly.
★★★★★
★★★★★
Frances B - December 16, 2022
Verified Purchase
worked as expected!!
fit right piece
★★★★★
★★★★★
Ron A - November 17, 2022
Verified Purchase
Easy repair
All was great
★★★★★
★★★★★
Serena H - September 4, 2022
Verified Purchase
Exact match, works great
Thankful to be able to buy a replacement. Fixed the pantry door very well. Takes a bit of a mechanical mind to put it all back together. Take a picture as you are doing the disassembly.
< Prev
1
2
3
Next >
Customer Repair Stories
Average Repair Rating: 4.0 / 5.0, 39 reviews.
What's this?
Sort by:
< Prev
1
2
3
Next >
Search filter:
Clear Filter
Your search term must have 3 or more characters.
Keep searches simple. Use keywords, e.g. "leaking", "pump", "broken" or "fit".
Sorry, we couldn't find any existing installation instruction that matched.
Hinge pin for drawer lid broke
1. Remove all drawers {3}, shelves {glass 1}, shelf support {1}. 2. Remove two {2} screws from End Cap. 3. Carefully remove End Cap and drawer temperature control part on the back wall keeping them aligned as installed. The part on the back wall swings out so that the tab on the left end of the piece may be withdrawn from the secu
... Read morering slot (hole). The two parts should be carefully removed while keeping the two parts at a right angle the way they are installed. The reason for this caution follows. 4. On the back side of both parts are plastic pieces that, I believe, can be easily broken if you are not aware. The pieces are connected together at the right angle. They are the control arms for the temperature control -- on right side End Cap only -- the left side doesn't have them or the rear part on the back wall. 5. The pieces must be disconnected and removed. You must examine and ponder how they are held in place and hooked together in order to disconnect and remove them without damaging them. The same advice is applicable to reinstalling the pieces in the new part -- End Cap. 6. After reassembled and keeping the two parts at a right angle, insert the tab on the left end of the back wall part into the slot (hole) and swing the two parts back into position. 7. Replace the screws. 8. Done, reinstall the shelf, shelf support, and the drawers. NOTE: I ordered the two screws but they were not needed.
Looked at the new part to determine what I would need to remove the old part. It was very easy to figure out. I removed the old end cap by taking out the screws. Once the screws were out I popped the side of the end cap off. There is a horizontal piece along the back wall that is connected to the end cap. On the left side of this piece of
... Read more plastic there is a small tab that clicks into the back wall. On the right hand end cap there is a sliding lever which controls the air in the deli tray. This control is made of plastic and appears to be pretty fragile> By gently bending this lever I was able to remove the control lever and install it on the new end cap. In all it took me about 15 minutes to complete the entire job. Very easy.
Read less
John from NEW BERN, NC
Difficulty Level:
Very Easy
Total Repair Time:
15 - 30 mins
Tools:
Nutdriver, Screw drivers
3 of 3 peoplefound this instruction helpful.
Was this instruction helpful to you?
Thank you for voting!
Bottom drawer access door hinge pin broke of pantry end cap - right side. The pin(knob) is a molded part of the end cap.
Removed two 1/4" screws from the end cap with the nut driver and removed it. Transferred a few pieces from the old end cap to the new. Reinstalled the new end cap and presto, job complete.
Neil from E GRAND RAPID, MI
Difficulty Level:
A Bit Difficult
Total Repair Time:
30 - 60 mins
Tools:
Nutdriver
1 personfound this instruction helpful.
Was this instruction helpful to you?
Thank you for voting!
broken plastic on crisper drawer
easy peasy
Stephanie from MOUNT AIRY, MD
Difficulty Level:
Really Easy
Total Repair Time:
15 - 30 mins
Tools:
Socket set
1 personfound this instruction helpful.
Was this instruction helpful to you?
Thank you for voting!
Dropped a jar onto the pantry and broke the plastic piece on end cap that moved the drawer lid.
Removed the lid and pantry drawer. Removed crisper drawer on right side and glass shelve. Removed 2 screws on glide. Removed 2 nuts with nut driver. Gently tugged on the pantry end cap and it released from the back wall. Had to rotate about 90 degrees to remove the extension off the back wall so I could remove the thermostat control arm f
... Read morerom old piece and put it onto the new piece. Gently removed the thermostat control through a series of squeezing pieces and rotations. Do not force anything. Take your time as you are working with plastic that could break at any moment with force. Replace in reverse order.
Read less
Terry from N SYRACUSE, NY
Difficulty Level:
Really Easy
Total Repair Time:
30 - 60 mins
Tools:
Nutdriver, Screw drivers
1 personfound this instruction helpful.
Was this instruction helpful to you?
Thank you for voting!
Neither part could be repaired, both needed to be replaced. Both had broken pieces.
Removed the broken parts and freplaced it with the new ones. All it took was a little time and patience, to gently remove and replace both parts. Refrigerator looks like new. Easy Instructions to follow.
This kind of repair makes me love the internet. Thank you. Follow advice of my fellow posters but beware, all your plastic parts are very brittle from the cold. Proceed slowly. As mentioned by others but worth stressing is...do resist the temptation to force any piece...I could just see myself snapping one of these pieces and having to or
... Read moreder another part! Take your time to work out the sequence to disengage each piece in turn. It's a bit of a puzzle but take your time. Also suggest starting the job with a nice bowl of warm baking-soda water to gently and effectively clean everything as you go.
Read less
Kennedy from SANTA MONICA, CA
Difficulty Level:
Easy
Total Repair Time:
15 - 30 mins
Tools:
Screw drivers, Socket set
4 of 4 peoplefound this instruction helpful.
Was this instruction helpful to you?
Thank you for voting!
Broken hinge pin on the Chef's Pantry drawer cover
I removed the crisper drawers and glass shelf and set them aside. Used a nut driver (maybe 5/16") to unbolt the old endcap as well as the back piece which it was attached to. I had to study the damper system a bit so I could figure out how to put it back together, took some quick snaps with the digital camera to be sure I wouldn't flub
... Read moreit. I transferred all of the misc plastic bits which make up the damper system into the new endcap and bolted it back in.
Read less
Chris from Santa Barbara, CA
Difficulty Level:
Really Easy
Total Repair Time:
Less than 15 mins
Tools:
Nutdriver
1 personfound this instruction helpful.
Was this instruction helpful to you?
Thank you for voting!
I had to remove broken part that held up shelve using screw drivers.
Pulled out all trays and glass shelve which enabled me to access and remove broken part easy.
Nancy from Peabody, MA
Difficulty Level:
Easy
Total Repair Time:
15 - 30 mins
Tools:
Screw drivers
0 of 1 peoplefound this instruction helpful.
Was this instruction helpful to you?
Thank you for voting!
< Prev
1
2
3
Next >
Questions and Answers
Ask our experts a question about this part and we'll get back to you as soon as possible!
26 questions answered by our experts.
Sort by:
< Prev
1
2
3
Next >
Search filter:
Clear Filter
Your search term must have 3 or more characters.
Keep searches simple. Use keywords, e.g. "leaking", "pump", "broken" or "fit".
Sorry, we couldn't find any existing answers that matched.Try using some different or simpler keywords, or submit your new question by using the "Ask a Question" button above!
Lucia
July 31, 2017
I think i need a replacement right pantry drawer support. The peg that holds the lid broke off. Please check if ps11738568 is what i need. If not please let me know what i should order. Thanks
For model number Jenn Air jfi2089aes2
Hi Lucia,
Thank you for your question. The right side end cap with the peg that the lid swivels open on is part number PS11738568.
Hope this helps!
56 people found this helpful.
Was this helpful?
Thank you for voting!
Kathleen
August 11, 2017
When the description states 'right side', is that on the right as you face the inside of the refrigerator or is it the right side as if you were standing with your back to the refrigerator?
For model number JFC2089HTB2
Hi Kathleen,
That is a great question. It will be your right side if you are standing in front of the appliance looking in or at the appliance.
Hope this helps!
40 people found this helpful.
Was this helpful?
Thank you for voting!
Steve
September 11, 2017
The lid to the deli drawer on the bottom is falling off due to the pin holding the lid on has broken. It's on the right hand side. Which part do I order to get a new pin? Thx!
For model number KFIS20XVMS8
Hi Steve,
Thank you for the question. The pin comes as part of the Pantry End Cap - Right Side and the end cap will need to be replaced.
Good luck with the repair!
11 people found this helpful.
Was this helpful?
Thank you for voting!
Michael
July 1, 2019
S/n KY2189941 the deli door retaining plastic pin broke off on right side (end cap w/temp-adjusting control slide). Is this end cap easily replaceable and is the part #ps11738568 ? It appears to have 2 or 3 mounting hex head screws holding it in place. I’m guessing the drawer metal slide detaches and reattached to end cap?
For model number KFIS25XVBL1
Hi Michael, thank you for your question. We have an installation video that you can view for how a part like this is installed: https://www.youtube.com/watch?v=0G8QcWb_2Fw&t=10s. Good luck with your repair.
9 people found this helpful.
Was this helpful?
Thank you for voting!
MARIELLEN
December 30, 2017
The pin on right side of the pantry drawer has broken off. I want to make sure i am ordering the right part, ps11738568, is that the correct #? Your parts list only showed the left side on the original list i saw.
For model number ARB8057CSL
Hello Mariellen, Thank you for your inquiry. Yes this is the end cap for the right side of the pantry drawer. Hope this helps!
6 people found this helpful.
Was this helpful?
Thank you for voting!
MARY LOU
March 6, 2019
I need the right side end clip for my pantry drawer door. The right side clip broke off. Is the part number that i need ps11738134? Thank you!Ml
For model number ABC2037DPS
Hello Mary Lou, thank you for inquiring. Yes, the Right Side Pantry End Cap for model ABC2037DPS is PS11738568.
2 people found this helpful.
Was this helpful?
Thank you for voting!
Stacy
October 4, 2019
My kitchen aid refrigerator is counter depth. Is this the correct part for the pantry drawer support it has the temp-adjustment control. When I'm facing my fridge its the right side draw support i want to replace.
For model number KFCO22EVBL0
Hello Stacy, Thank you for contacting us. I have researched the model you have provided and have found the part you are looking for is PartSelect Number PS11748630. Hope this helps!
I need a pantry end cap. If i am facing the front of the refrigerator it would be the one on the right.
For model number MFC2061KES2
Hello Harold, thank you for your question. The right side end cap for this unit is PartSelect Number: PS11738568. I hope this helps!
2 people found this helpful.
Was this helpful?
Thank you for voting!
Vickie
April 10, 2023
I need the part that the pantry door hooks on too. The right side hook I has broken off.
For model number Gi0fsaxvy08
Hello Vickie, we are glad you asked! Yes, the End Cap Right Side PS11738568 you had chosen is correct. We are pleased to have been able to help.
1 person found this helpful.
Was this helpful?
Thank you for voting!
Ken
April 6, 2018
The part # i wish to order is #:Ps11738568 which is the right side end cap for our Amana refer; however, the picture shown when i go to check out shows the part sloping up from the end, but ours slops down from the top. The knob that holds the pantry cover is broken off on ours. So how do i order the down sloping part?
For model number Amana Model #:ABC2037DEW
Hello Ken, Thank you for your inquiry. This part is the one that is compatible to your model, and it does actually slope down from the top, the pictures we have show it at two different angles. Hope this helps!
1 person found this helpful.
Was this helpful?
Thank you for voting!
< Prev
1
2
3
Next >
✖
Ask a Question
Ask our experts a question on this part and we'll respond as soon as we can.
