This genuine OEM crisper frame support provides stability to the crisper drawer in your refrigerator, preventing sagging or collapse under the weight of produce. It is typically located at the bottom or near the rear wall of the fridge. If the crisper drawer feels unstable or wobbly, it may indicate a broken or damaged frame support. To replace it, remove items from the crisper shelf, then the shelf and crisper itself. Take off the glass from the top of the frame, and pull the support off the mounting stud. Note that the wall anchor for mounting this replacement part is sold separately.
How Buying OEM Parts Can Save You Time and Money
Part Videos
Replacing your Amana Refrigerator Crisper Frame Support
Troubleshooting
This part works with the following products:
Refrigerator.
Part# WP12603701 replaces these:
AP6005507, 12603701, 8208330
Customer Reviews
Average Rating:
★★★★★
★★★★★
7 Reviews
4.4
Filter By Rating:
5 Stars
6
4 Stars
0
3 Stars
0
2 Stars
0
1 Star
1
Sort by:
< Prev
1
Next >
Search filter:
Clear Filter
Your search term must have 3 or more characters.
Keep searches simple. Use keywords, e.g. "leaking", "pump", "broken" or "fit".
Sorry, we couldn't find any existing reviews that matched. Try using some different or simpler keywords.
★★★★★
★★★★★
Clifford J - December 28, 2023
Verified Purchase
Easy to install and worked perfectly
Fast service and everything if fine!
★★★★★
★★★★★
Rod A B - August 27, 2023
Verified Purchase
Correct part for the job!
While taking apart the drawers in our 2nd fridge to do some cleaning, the drawer became jammed part way out and in the ensuing battle to get it out, managed to break one of the side clips that holds the track into the fridge. Thank you for having the correct item I needed to repair the fridge, quick shipping and a big THANK YOU!
★★★★★
★★★★★
Paula S - January 19, 2022
Verified Purchase
Easy repair
The part came fast and was easy to install. I was very satisfied
★★★★★
★★★★★
Susan H - December 8, 2021
Verified Purchase
Easy fix.
Works fine.
★★★★★
★★★★★
Ellen M - December 4, 2018
Verified Purchase
Perfect!
The girl was a huge help! When I received it , it was perfect!
★★★★★
★★★★★
Willard H - September 19, 2018
Verified Purchase
Quick Delivery! Easy Repair!
The part arrived shortly after ordering it. The part fit the stud and works well. It was an easy repair. The hardest part was finding the part number prior to ordering. I will use PartSelect again as needed. Thank you!
★★★★★
★★★★★
Debbi A S - February 7, 2018
Verified Purchase
Did not need these support pieces
Not needed. Waste of $$.
< Prev
1
Next >
Customer Repair Stories
Average Repair Rating: 4.4 / 5.0, 9 reviews.
What's this?
Sort by:
< Prev
1
Next >
Search filter:
Clear Filter
Your search term must have 3 or more characters.
Keep searches simple. Use keywords, e.g. "leaking", "pump", "broken" or "fit".
Sorry, we couldn't find any existing installation instruction that matched.
Crisper Frame broke at midspan in rear; glass shelf left taking all the load
Replacement is pretty simple using the video provided on PartSelect--might just need a small screwdriver to get the front metal brace exchanged (also in video). Real issue is the frame design; it's bad. There is no support provided for the rear edge of the shelf at midspan, which causes the frame/center rail to bow and fatigue bac
... Read morek there, eventually breaking with constant use of the crisper drawers coupled with shelf load. To remedy this, after replacement I cut a 6 inch length of 1"x1" post, painted it gloss white, and wedged it underneath the new frame right where the center rail attaches in the back (glass shelf below provides the wedge base). There is no interference with the drawers if the wedge is against the back wall, and you really can't see it. Should work to keep the stress off the plastic. Other ways are obviously possible; this is what I had around the house.
Crisper Frame was cracked at the back and piece that deli drawer cover snaps into was broken on right side
Removed crisper drawers, removed glass, removed broken crisper frame, removed deli drawer cover, removed glass and removed deli drawer. Removed left and right pantry end caps and installed new pantry end caps. Re-installed pantry drawer, glass and drawer cover. Assembled new crisper frame with parts from old according to video instruct
... Read moreions, installed center rail and installed new crisper frame . Re-installed crisper drawers and glass. The videos were extremely easy to follow.
followed instructions and used common sense and the salesman was very helpful and knowledgeable and he contributed a lot of help in finding the right parts that fit
We joined a CSA (community supported agriculture) and we put too much of the veggies in the crisper. It broke the crisper frame and bar. Replacing them took less than 15 minutes. No tools needed.
Grand child stood on crisper and broke it. Does any one know if a dishwasher front can be changed after it has been purchased,and where you finde it ?
Ordered from P S and very fast service customer service was great. I would recomend P S to anyone that needs parts.
Claude J from Orange Park, FL
Difficulty Level:
Really Easy
Total Repair Time:
Less than 15 mins
Tools:
Screw drivers
3 of 8 peoplefound this instruction helpful.
Was this instruction helpful to you?
Thank you for voting!
fridge side was not getting cold
first I removed the panels to see if the coils were getting frosty . Then I noticed that the fan was not spinning. I tested voltage to the fan and it was hot. I ordered the new fan put it in placve and, voila!. Fixed my fride for under 50 bucks
We're sorry, but our Q&A experts are temporarily unavailable.
Please check back later if you still haven't found the answer you need.
4 questions answered by our experts.
Sort by:
< Prev
1
Next >
Search filter:
Clear Filter
Your search term must have 3 or more characters.
Keep searches simple. Use keywords, e.g. "leaking", "pump", "broken" or "fit".
Sorry, we couldn't find any existing answers that matched.Try using some different or simpler keywords, or submit your new question by using the "Ask a Question" button above!
Alissa
August 27, 2019
We need the wall anchor on the left side that supports the crisper. I don’t see this listed
For model number Mfd2560hes
Good Day Alissa. Thank you for your question in regards to your unit (Model Number MFD2560HES). Based on our research the PartSelect Number for the part that is compatible with your unit is PS11738556. You can order this part either online at our website www.PartSelect.com or by calling us by phone at 888-260-4310. Best Regards.
6 people found this helpful.
Was this helpful?
Thank you for voting!
David
March 3, 2018
The wall mount is broken. I bought the crisper support repair kit. How do you install this?Can't get the wall mount out
For model number MFI2568AES
Hello David, Thank you for your inquiry. If the wall anchor that this mounts to is broken, you will require the a new wall mount part# WP61005050, which comes with instructions. Hope this helps!
3 people found this helpful.
Was this helpful?
Thank you for voting!
Gabe
July 30, 2019
My crisper shelf support inner clip broke flush at wall how do i get that out to replace complete
For model number KBFA25ERSS01
Hi Gabe, thank you for your question. We have an installation video located underneath the above part information. Here is the direct link: https://youtu.be/Zy2Rio8qg7I. I hope that helps. Good luck with your repair.
2 people found this helpful.
Was this helpful?
Thank you for voting!
Margaret
November 13, 2017
How is the middle piece, between the crisper drawers,installed?
For model number AFD2535FES
Hi Margaret, Thank you for the question. First you will need to remove crisper drawers from bottom shelf frame.Next remove glass from the top of the frame. Insert the new center rail into slots on the crisper frame. Replace glass and the drawers. Good luck with the repair!
