Part Location Diagram of WP12550109Q Whirlpool Refrigerator Door Gasket
See part 91 in the diagram
Replacing your Amana Refrigerator Refrigerator Door Gasket
( Grid squares measure 1x1 inch )
Customer Service Representative

Get in touch, we're here to help!

Monday to Saturday
8am - 9pm EST

customerservice@partselect.com

Refrigerator Door Gasket WP12550109Q

 Fits your GTG18AL!
★★★★★
★★★★★
7 Reviews

Rated by 16 customers 

Easy 

1- 2 hours 

Ratings submitted by customers like you who bought this part.

$ 172.91
  In Stock
Get FREE EconoShip on orders over $100! T&C apply

Get this part fast! Average delivery time for in-stock parts via standard shipping: 1.8 days.

 Fits your GTG18AL!
PartSelect Number PS11738521
Manufacturer Part Number WP12550109Q
Manufactured by Whirlpool
Product Description

Refrigerator Door Gasket Specifications

This fresh food door gasket is white and made of rubber. It measures approximately twenty-eight and a half inches wide by forty inches long.
How Buying OEM Parts Can Save You Time and Money

How Buying OEM Parts Can Save You Time and Money

Part Videos

Replacing your Amana Refrigerator Refrigerator Door Gasket

Replacing your Amana Refrigerator Refrigerator Door Gasket
Troubleshooting
This part fixes the following symptoms:
Door Sweating | Fridge runs too long | Door won’t open or close
This part works with the following products:
Refrigerator.
This part works with the following products:
Amana, Caloric, Kenmore.
Part# WP12550109Q replaces these:
AP6005472, 10456801, 10456801Q, 10456831, 10456831Q, 10456853, 10456853Q, 12529009, 12550109, 12550109Q
Back to Top
Customer Reviews
Average Rating:
★★★★★
★★★★★
7 Reviews
3.9
Filter By Rating:
  • 5 Stars
    4
  • 4 Stars
    0
  • 3 Stars
    2
  • 2 Stars
    0
  • 1 Star
    1
Sort by:
  • 1
Sorry, we couldn't find any existing reviews that matched. Try using some different or simpler keywords.
  • 1
Customer Repair Stories
 Average Repair Rating: 2.9 / 5.0, 16 reviews. What's this?
Sort by:
  • 1
  • 2
Sorry, we couldn't find any existing installation instruction that matched.
Having patience and plenty of time
The refrigerator never gave me any trouble. It's at least 25 years old. It runs like new now. The gasket can be softened, gently using a hairdryer. The key is to attach the gasket to the refrigerator and use a hairdryer, going back and forth the length of the gasket. Then, to stop using the hairdryer and with the hands pull (gently) on the gasket, the length of the gasket straightening and making the gasket wider so it attaches to the refrigerator as it cools. Then look for gaps and places where air is escaping and repeat, until a good seal is achieved. This is so much better than buying new, and in 10 years buying new again with planned obsolescence.
Other Parts Used:
Freezer Door Gasket Refrigerator Door Gasket
  • Amy from MISHAWAKA, IN
  • Difficulty Level:
    A Bit Difficult
  • Total Repair Time:
    More than 2 hours
  • Tools:
    Nutdriver
2 of 2 people found this instruction helpful.
Was this instruction helpful to you?
Thank you for voting!
Fridge was dripping water (condensation), gasket was clearly deteriorated
I did not remove the door from the fridge deciding to replace the gasket while the door was still attached. Next time I will follow their suggestion to remove the door and lay it down. I didn't realize that when you take the screws out (And there are A LOT of screws!) the whole panel comes off the door. It also took a long time to clean the door and panel with years of dirt/mildew to deal with. I had a hard time trying to get the kinks out with a hair dryer, didn't seem to work. Putting the new one on and screwing it back in place was pretty easy (would have been easier if it was laying flat). There are a couple of places where the seal is not perfect because of the kinks, but not going to worry about that.
  • Kathy from NEWARK, DE
  • Difficulty Level:
    A Bit Difficult
  • Total Repair Time:
    30 - 60 mins
  • Tools:
    Nutdriver
1 person found this instruction helpful.
Was this instruction helpful to you?
Thank you for voting!
door gasket old and starting to come apart
removed upper freezer door, then removed refrig door,laid door on 2 saw horses, removed screws holding old gasket on,removed old gasket, installed new gasket as instructed by the on-line video,used an electric hair dryer to soften up gasket and work out the kinks,remounted he doors and i was done. door is back to sealing properly. the on-line video was very helpful
  • james from FRIENDSHIP, NY
  • Difficulty Level:
    Really Easy
  • Total Repair Time:
    30 - 60 mins
  • Tools:
    Socket set
1 person found this instruction helpful.
Was this instruction helpful to you?
Thank you for voting!
replace both door gasgets
did not remove the doors. did freezer first ,removed inner door planel install gasget on panel and reinstalled. the aloney problem i had was trying to resape the door gasget on the big door. which is still a little out of shape hopeing it will fall in line over time.
Other Parts Used:
Freezer Door Gasket Refrigerator Door Gasket
  • ROBERT from SEEKONK, MA
  • Difficulty Level:
    Easy
  • Total Repair Time:
    30 - 60 mins
  • Tools:
    Nutdriver, Pliers
2 of 4 people found this instruction helpful.
Was this instruction helpful to you?
Thank you for voting!
replace moldy gaskets on doors
It was a complete mess and a failure. There were no in structions with the gaskets except warming them in water to streatch them. Nothing with a photo of what the gasket looks like as it is being installed or after installation. I am still not convinced they are the correct gaskets for the model. It was a total waste of time and $130.00 to try to replace the gaskets. In the end, I determined that it would be cheaper in the long run to buy a used refrigerator than to mess with the gaskets.
Other Parts Used:
Freezer Door Gasket Refrigerator Door Gasket
  • patrick from st petersburg, FL
  • Difficulty Level:
    Very Difficult
  • Total Repair Time:
    More than 2 hours
  • Tools:
    Nutdriver
6 of 8 people found this instruction helpful.
Was this instruction helpful to you?
Thank you for voting!
Replaced old worn out gasket
I hired a jack-of-all-trades friend of mine to do the job. He had just the right tool to take out all the screws so that went smoothly. Slipping the new gasket into place while I held the inner door shelving section in place was a little tricky and the gasket seemed a little off along the bottom and one side of the door frame. We gave it a couple of days to seat itself. Two days later, there was condensation forming inside so my friend returned and took a look. He spotted a couple of places where the gasket magnet was not sealing properly. Out from his pocket, he pulled what looked like a brass jack knife with japanese writing on it and said it was a japanese carving tool. He opened up one of the parts that had a smooth blunt tip on it and slid it down the channel in the gasket from the outside. Voila! The magnet grabbed. He adjusted a couple of screws along the bottom and , after that, there were no more problems. So be sure to have your japanese carving toll ready when you start this job!
  • Sandra from Putney, VT
  • Difficulty Level:
    A Bit Difficult
  • Total Repair Time:
    30 - 60 mins
  • Tools:
    Socket set
7 of 8 people found this instruction helpful.
Was this instruction helpful to you?
Thank you for voting!
Bad seal around the inside of refrigerator door
Loosened all the screws and pulled the old gasket off. It was fairly easy to get the new one in place. After I had it on it did not seal well so I had to use a hair dryer to get the seal tight.
  • James from St Charles, MN
  • Difficulty Level:
    Easy
  • Total Repair Time:
    15 - 30 mins
  • Tools:
    Socket set
0 of 1 people found this instruction helpful.
Was this instruction helpful to you?
Thank you for voting!
Broken Door Gasket
Emptied door shelves; removed umpteen screws (electric driver); replaced gasket and same umpteen screws; reloaded shelves. Didn't even turn off refrigerator. And, had great help from you (Sue) when I originally ordered the wrong gasket. Job was a piece of cake and your service outstanding.
  • John from Berkeley, CA
  • Difficulty Level:
    Really Easy
  • Total Repair Time:
    30 - 60 mins
  • Tools:
    Nutdriver
0 of 1 people found this instruction helpful.
Was this instruction helpful to you?
Thank you for voting!
old seal was shot
New seal arrived basically folded in half for shipping. Was advised to use hair dryer and/or hot water to restore original shape. Neither worked. I installed it anyway and am waiting (3 days so far) for it to seal (so far, no luck). I'll give it another day or 2, re-install the old one and write off the $75
  • Steve from San Juan Capistrano, CA
  • Difficulty Level:
    Very Difficult
  • Total Repair Time:
    30 - 60 mins
  • Tools:
    Nutdriver
3 of 4 people found this instruction helpful.
Was this instruction helpful to you?
Thank you for voting!
The gasket size was perfect. Problem was it didn't seal the whole door properly, thus I'm getting evaporation.
I unscrewed about 20 screws from the door, took out the inside, cleaned it first, then put the door gasket on, Screwed the door back in place.
  • William from Fresh Meadows, NY
  • Difficulty Level:
    Really Easy
  • Total Repair Time:
    15 - 30 mins
  • Tools:
    Socket set
2 of 4 people found this instruction helpful.
Was this instruction helpful to you?
Thank you for voting!
  • 1
  • 2
Questions and Answers

We're sorry, but our Q&A experts are temporarily unavailable.
Please check back later if you still haven't found the answer you need.

7 questions answered by our experts.
Sort by:
  • 1
Sorry, we couldn't find any existing answers that matched.Try using some different or simpler keywords, or submit your new question by using the "Ask a Question" button above!
LJ
May 28, 2019
I am having trouble finding a replacement door gasket for my Amana top mount's refrigerator door. I suspect that's because the original refrig. And freezer door gaskets are black and only white ones are available. I don't care about the gasket color — will this part fit my refrigerator (not the freezer) door?
For model number TX18VE — P1315706WE
PartSelect logo
Hello LJ, thank you for inquiring. Yes, this Refrigerator Door Gasket is compatible to your model.

1 person found this helpful.

Was this helpful?
Thank you for voting!
Michael
September 28, 2017
Have Amana refrig. # qt18r2w need door gasket. What one fits it? Thanks
For model number TQ18R2W
PartSelect logo
Hi Michael, Thank you for your inquiry. The part number for correct refrigerator door gasket for your appliance is PS11738521. I hope this helps. Thank you and have a great day!

1 person found this helpful.

Was this helpful?
Thank you for voting!
Kayleigh
March 20, 2023
My fridge door doesn't stay shut all the time. Would replacing the gasket around the door fix that problem?
For model number Tr18v1w
PartSelect logo
Hello Kayleigh, Thank you for your inquiry. We recommend replacing the Bottom Hinge Pin PS2070499.If you see gaps, or damage on your gasket, then it should be replaced. We are pleased to have been able to help.

1 person found this helpful.

Was this helpful?
Thank you for voting!
Related Parts:
Kurt
January 4, 2019
I have an Amana refrigerator model #tx18vw in need of a door gasket. Will this one work?
For model number TX18VW
PartSelect logo
Hello Kurt, thank you for your question. Yes, the gasket Part Number: PS11738521 will work for your fridge door. Good luck with your repair!

Was this helpful?
Thank you for voting!
Michelle
June 10, 2019
Hi! Does this work with Amana ta181tw p1304501ww for the refrigerator door?Thank you tons.
For model number Amana ta181tw- p1304501ww
PartSelect logo
Hello Michelle, thank you for asking. Yes, this is the replacement for your model.

Was this helpful?
Thank you for voting!
Steven
July 25, 2019
Should the gasket have holes in ti?
For model number TQ18RTW
PartSelect logo
Hello Steven, Thank you for the question. The corners may have a small hole in the corners to let air out. Hope this helps!

Was this helpful?
Thank you for voting!
Ted
July 19, 2021
I am looking for the door seal for the refrigerator part of this refrigerator. Do you have that?
For model number TK18R3W
PartSelect logo
Hello Ted, Thank you for contacting us. We have researched the model you have provided and have found the part you are looking for is PartSelect Number PS11738521. We hope this helps!

Was this helpful?
Thank you for voting!
  • 1
You May Also Need ?
Model Cross Reference
This part works with the following models:
PartSelect Number: PS11738521
Manufacturer Part Number: WP12550109Q
Brand
Model Number
Description
Kenmore
59669892001
Refrigerator
Kenmore
59669894001
Refrigerator
Kenmore
59669899001
Refrigerator
Amana
ATS518SW
Refrigerator
Amana
ATS518SW-P1183713WW
Refrigerator - TOP-MOUNT REFRIGERATOR
Amana
ATS518SW-P1183714WW
Refrigerator - TOP-MOUNT REFRIGERATOR
Amana
ATX518VW
Refrigerator
Amana
ATX518VW-P1322503WW
Refrigerator - REFRIGERATOR
Amana
DRT1802AC
Refrigerator
Amana
DRT1802AW
Refrigerator
Amana
GTA18AL
Refrigerator
Amana
GTA18AW
Refrigerator
Amana
GTA18B2L
Refrigerator
Amana
GTA18B2L-P1192601WL
Refrigerator - TOP MOUNT REFRIGERATOR
Amana
GTA18B2L-P1192602WL
Refrigerator - TOP-MOUNT REFRIGERATOR
Amana
GTA18B2L-P1192603WL
Refrigerator - TOP-MOUNT REFRIGERATOR
Amana
GTA18B2W
Refrigerator
Amana
GTA18B2W-P1192601WW
Refrigerator - TOP MOUNT REFRIGERATOR
Amana
GTA18B2W-P1192602WW
Refrigerator - TOP-MOUNT REFRIGERATOR
Amana
GTG18AL
Refrigerator
Amana
GTG18AW
Refrigerator
Amana
GTG18B2L
Refrigerator
Amana
GTG18B2L-P1192801WL
Refrigerator - TOP MOUNT REFRIGERATOR
Amana
GTG18B2L-P1192802WL
Refrigerator - TOP-MOUNT REFRIGERATOR
Amana
GTG18B2L-P1192803WL
Refrigerator - TOP-MOUNT REFRIGERATOR
Amana
GTG18B2W
Refrigerator
Amana
GTG18B2W-P1192801WW
Refrigerator - TOP MOUNT REFRIGERATOR
Amana
GTG18B2W-P1192802WW
Refrigerator - TOP-MOUNT REFRIGERATOR
Amana
GTG18B2W-P1192803WW
Refrigerator - TOP-MOUNT REFRIGERATOR
Amana
GTW18AL
Refrigerator
Customer Service Representative

Get in touch, we're here to help!

Monday to Saturday
8am - 9pm EST

Contact Customer Service