Electronic Control Board WP1187912 | Official Whirlpool Part | Fast Shipping | PartSelect
Electronic Control Board – Part Number: WP1187912
Electronic Control Board – Part Number: WP1187912 Electronic Control Board – Part Number: WP1187912 Electronic Control Board – Part Number: WP1187912 Electronic Control Board – Part Number: WP1187912 https://partselectcom.azureedge.net/Schematics/Whirlpool/VQMOAOGL.gif

Electronic Control Board

PartSelect Number PS11738436

Manufacturer Part Number WP1187912

Manufactured by Whirlpool

Troubleshooting

This part works with the following products:

Dehumidifier.

This part works with the following brands:

Whirlpool.

Part # WP1187912 replaces these:

1184916, 1187912.
Questions and Answers
We're sorry, but our Q&A experts are temporarily unavailable.
Please check back later if you still haven't found the answer you need.
1 question answered by our experts.
Sort by:
Keep searches simple. Use keywords, e.g. "leaking", "pump", "broken" or "fit".
Customer Repair Stories
Average Repair Rating: 3.3 / 5.0, 1 reviews What's this?
Sort by:
Keep searches simple. Use keywords, e.g. "leaking", "pump", "broken" or "fit".
Alan Van from Springfield, OR
Difficulty Level:
Easy
Total Repair Time:
30 - 60 mins
Tools:
Screw drivers
Parts Used:
WP1187912
bad control on 1998 Whirlpool dehumidifier
Disassemble all the housings starting with front cover, top, sheetmetal side/back piece and top styrofoam support. The top slides back 3/8" before you can lift it up off the keys. Carefully pry/pop the control board loose from the top piece and swap all the wires. Had to cut loose 2 zip-ties to re-route the tank switch wires: immediately replace with new zip-tie left full loose so new wires can be re-routed without wiring bundle falling all over. Get all the wires positioned and finish tightening up the zip-ties, but not all the way, just like the factory did. Cut the tails on the ties.

While all the housings were off I vacuumed off the parts and coils and washed the fan blades off with soapy water and a sponge. Looked for chafed wires and such. Trimmed the coil case up with sheet metal shears where it was rubbing on the styrofoam bottom tray and gently filed the cut smooth.

Reassembly: snap the board back into the top piece, put the styrofoam top support on, then the side/back metal, then the top, dropping it onto the keys and sliding it forward again. The front piece goes on last.
1 person found this instruction helpful.
Was this instruction helpful to you?
Customer Reviews
Average Rating:
2 Reviews
5
out of 5
Filter By Rating:
  • 5 Stars
    2
  • 4 Stars
    0
  • 3 Stars
    0
  • 2 Stars
    0
  • 1 Stars
    0
Sort by:
Keep searches simple. Use keywords, e.g. "leaking", "pump", "broken" or "fit".
Model Cross Reference

This part works with the following models:

PartSelect Number: PS11738436
Manufacturer Part Number: WP1187912
Brand
Model Number
Description
Whirlpool
AD40LBK0
Dehumidifier
Whirlpool
AD40USL1
Dehumidifier
Whirlpool
AD40USL3
Dehumidifier
Whirlpool
AD40USL4
Dehumidifier
Whirlpool
AD40USL5
Dehumidifier
Whirlpool
AD40USR0
Dehumidifier
Whirlpool
AD40USR1
Dehumidifier
Whirlpool
AD50LBK0
Dehumidifier
Whirlpool
AD50USL1
Dehumidifier
Whirlpool
AD50USL3
Dehumidifier
Whirlpool
AD50USL4
Dehumidifier
Whirlpool
AD50USL5
Dehumidifier
Whirlpool
AD50USR0
Dehumidifier
Whirlpool
AD50USR1
Dehumidifier
Whirlpool
AD60LBK0
Dehumidifier
Whirlpool
AD65LEK0
Dehumidifier
Whirlpool
AD65USL1
Dehumidifier
Whirlpool
AD65USM0
Dehumidifier
Whirlpool
AD65USM1
Dehumidifier
Whirlpool
AD65USM2
Dehumidifier
Whirlpool
AD65USR0
Dehumidifier
Whirlpool
AD65USR1
Dehumidifier
Whirlpool
AD70USR0
Dehumidifier