Part Location Diagram of WP1168670 Whirlpool Humidistat Control
See part 2 in the diagram
( Grid squares measure 1x1 inch )
Customer Service Representative

Get in touch, we're here to help!

Daily 8am - 9pm EST

customerservice@partselect.com

Humidistat Control WP1168670

★★★★★
★★★★★
1 Review

Rated by 3 customers 

Easy 

15 - 30 mins 

Ratings submitted by customers like you who bought this part.

$ 81.09
  In Stock
Get FREE EconoShip on orders over $100! T&C apply

Get this part fast! Average delivery time for in-stock parts via standard shipping: 1.8 days.

PartSelect Number PS11738359
Manufacturer Part Number WP1168670
Manufactured by Whirlpool
Product Description

Humidistat Control Specifications

The humidistat control, used in dehumidifiers, switches the dehumidifier on and off automatically to maintain humidity. If the switch does not work, the humidifier will not maintain the temperature properly. For this repair, screwdrivers are the only tools needed. First remove the knob and the screws from the top. Pry back the plastic retainers on one side of the old humidistat and remove wires before installing the new part and reattaching the two wires that connect to it. Remember to unplug the humidifier from the power source before installation.
How Buying OEM Parts Can Save You Time and Money

How Buying OEM Parts Can Save You Time and Money

Troubleshooting
This part works with the following products:
Dehumidifier.
This part works with the following products:
Whirlpool, Roper, Kenmore.
Part# WP1168670 replaces these:
AP6005326, 1168670
Back to Top
Customer Reviews
Average Rating:
★★★★★
★★★★★
1 Review
5.0
Filter By Rating:
  • 5 Stars
    1
  • 4 Stars
    0
  • 3 Stars
    0
  • 2 Stars
    0
  • 1 Star
    0
Sort by:
  • 1
Sorry, we couldn't find any existing reviews that matched. Try using some different or simpler keywords.
  • 1
Customer Repair Stories
 Average Repair Rating: 4.0 / 5.0, 3 reviews. What's this?
Sort by:
  • 1
Sorry, we couldn't find any existing installation instruction that matched.
Didn't go as well as the last guy....
First....you need a metric nut driver...not a standard...this took me five trips to four stores to find. So if you have this model number don't think it is merely a screwdriver and a Phillips. After that the job was simple but the humidistat did not fix my dehumidifier. It was worth the $38 try ...but sadly off to buy a new one...
  • Kris from GREEN BAY, WI
  • Difficulty Level:
    A Bit Difficult
  • Total Repair Time:
    30 - 60 mins
  • Tools:
    Nutdriver, Screw drivers
1 of 2 people found this instruction helpful.
Was this instruction helpful to you?
Thank you for voting!
The Origional Humidistat Quit Working
The knob one turns to set the humidity level was removed. The two screws holding the top on were removed. The top was lifted and swung to the side. After noting which of the two wires went where on the humidistat the wires were removed. Small flat screwdrivers were used to pry back the plastic retainers on one side of the original failed humidistat. The new one was put in place, the two wires were reattached. The knob was replaced. The top was positioned and its two retaining screws replaced. A magnetic phillips screwdriver was handy but not necessary. Piece of cake! Someone with ten thumbs could do it!! Thanks for the prompt courteous attention to the returned erroneous part! Dealing with partselect. Com was a pleasure. . . . . . Thanks!! P. S. The dehumidifier works like new now!!
  • James from Silver Bay, MN
  • Difficulty Level:
    Really Easy
  • Total Repair Time:
    Less than 15 mins
  • Tools:
    Screw drivers
9 of 16 people found this instruction helpful.
Was this instruction helpful to you?
Thank you for voting!
the humidity control broke
Taking the case apart and replacing the control unit was a piece of cake. And the part arrived the very day after I ordered it.
  • larry from tampa, FL
  • Difficulty Level:
    Really Easy
  • Total Repair Time:
    15 - 30 mins
  • Tools:
    Screw drivers
8 of 17 people found this instruction helpful.
Was this instruction helpful to you?
Thank you for voting!
  • 1
Questions and Answers

Be the first to ask our experts a question about this part!

Model Cross Reference
This part works with the following models:
PartSelect Number: PS11738359
Manufacturer Part Number: WP1168670
Brand
Model Number
Description
Kenmore
10657250790
Dehumidifier
Kenmore
10657300790
Dehumidifier
Kenmore
10657400790
Dehumidifier
Kenmore
10657500790
Dehumidifier
Whirlpool
4AD50DSL1
Dehumidifier
Whirlpool
AD025SG0
Dehumidifier
Whirlpool
AD025SJ0
Dehumidifier
Whirlpool
AD040SG0
Dehumidifier
Whirlpool
AD050SG0
Dehumidifier
Whirlpool
AD25BBL0
Dehumidifier
Whirlpool
AD25BBL2
Dehumidifier
Whirlpool
AD25BBL3
Dehumidifier
Whirlpool
AD25BBL4
Dehumidifier
Whirlpool
AD25BBL6
Dehumidifier
Whirlpool
AD25BBL7
Dehumidifier
Whirlpool
AD25BBL8
Dehumidifier
Whirlpool
AD25BBR0
Dehumidifier
Whirlpool
AD25BBR1
Dehumidifier
Whirlpool
AD25BSR0
Dehumidifier
Whirlpool
AD25BSS0
Dehumidifier
Whirlpool
AD25CH0
Dehumidifier
Whirlpool
AD25DSS0
Dehumidifier
Whirlpool
AD25DSS1
Dehumidifier
Whirlpool
AD25G0
Dehumidifier
Whirlpool
AD25G1
Dehumidifier
Whirlpool
AD25GO
Dehumidifier - DEHUMIDIFIER
Whirlpool
AD25J0
Dehumidifier
Whirlpool
AD25J1
Dehumidifier - DEHUMIDIFIER
Whirlpool
AD25J2
Dehumidifier
Whirlpool
AD25TH0
Dehumidifier
Customer Service Representative

Get in touch, we're here to help!

Daily 8am - 9pm EST

Contact Customer Service