Part Location Diagram of WP10450603 Whirlpool Single Roller
See part 52 in the diagram
( Grid squares measure 1x1 inch )
Customer Service Representative

Get in touch, we're here to help!

Monday to Saturday
8am - 9pm EST

customerservice@partselect.com

Single Roller WP10450603

 Fits your GTG18AL!
★★★★★
★★★★★
1 Review

Rated by 5 customers 

A Bit Difficult 

30 - 60 mins 

Ratings submitted by customers like you who bought this part.

$ 9.51
  In Stock
Get FREE EconoShip on orders over $100! T&C apply

Get this part fast! Average delivery time for in-stock parts via standard shipping: 1.8 days.

 Fits your GTG18AL!
PartSelect Number PS11738235
Manufacturer Part Number WP10450603
Manufactured by Whirlpool
Product Description

Single Roller Specifications

This wheel is sold individually. It is located on the bottom of the refrigerator.
How Buying OEM Parts Can Save You Time and Money

How Buying OEM Parts Can Save You Time and Money

Troubleshooting
This part works with the following products:
Refrigerator.
This part works with the following products:
Amana, Maytag, Kenmore, Jenn-Air.
Part# WP10450603 replaces these:
AP6005220, 10450601, 10450602, 10450603, 10450603V, 67005127, M0520001, M0520101
Back to Top
Customer Reviews
Average Rating:
★★★★★
★★★★★
1 Review
4.0
Filter By Rating:
  • 5 Stars
    0
  • 4 Stars
    1
  • 3 Stars
    0
  • 2 Stars
    0
  • 1 Star
    0
Sort by:
  • 1
Sorry, we couldn't find any existing reviews that matched. Try using some different or simpler keywords.
  • 1
Customer Repair Stories
 Average Repair Rating: 3.0 / 5.0, 5 reviews. What's this?
Sort by:
  • 1
Sorry, we couldn't find any existing installation instruction that matched.
broken front wheel
remove front grill. with pry bar and wooden block, elevate side with broken wheel and insert wooden block behind assemble from the exterior bottom. With roller wheel assemble lose from the wooden block remove front elevator screw from the front frame. next remove cotter pin with the pliers and pull assemble pin. next elevate assemble out. drill out axle on the crimp side insert from the hardware store one 5/16 x 21/2 bolt with nut and new wheel. reinsert assemble in the reverse order. Remove wooden block and adjust height of wheel. replace grill. job complete. good job
  • Robert from Orting, WA
  • Difficulty Level:
    Difficult
  • Total Repair Time:
    Less than 15 mins
  • Tools:
    Nutdriver, Pliers
6 of 9 people found this instruction helpful.
Was this instruction helpful to you?
Thank you for voting!
Left front plastic wheel was broken
Pop loose the plastic grate at the bottom.

Locate and remove the wheel leveling screw from the front bottom corner.

Remove cotter pin from the pin that mounts the wheel assembly to the refrigerator. Tap out the mounting pin.

Lift out the wheel assembly.

Remove the Roller pin from the wheel assembly. I used a Dremel tool with a cutting disk. A hack saw will also probably work.

Install the new roller pin and wheel into the wheel assembly. Use a hammer or vice to peen over the end of the roller pin.

Reinstall and adjust wheel assembly.
Other Parts Used:
Roller Pin Single Roller
  • mike from holly springs, NC
  • Difficulty Level:
    Really Easy
  • Total Repair Time:
    30 - 60 mins
  • Tools:
    Nutdriver, Pliers, Screw drivers
12 of 16 people found this instruction helpful.
Was this instruction helpful to you?
Thank you for voting!
broken roller
proped up frig, loosened screws, cut pin, installed rooler w/ new pin, rounded pin end, reistalled, lowered frig...everyone happy, thanks again partselect.
Other Parts Used:
Roller Pin Single Roller
  • John from Capac, MI
  • Difficulty Level:
    Really Easy
  • Total Repair Time:
    15 - 30 mins
  • Tools:
    Nutdriver
3 of 3 people found this instruction helpful.
Was this instruction helpful to you?
Thank you for voting!
The plastic wheel broke in half at the right front of the refrigerator.
The good news is that the part (the wheel was available.) I bought two in the event that the other wheel may break in the future. The bad news is that the housing that holds the wheel was riveted together by the wheel axle. It would have been nice to know that before I bought the part and if the housing with the wheel installed was available. The refrigerator was at my summer house a hundred miles away. Anyway, we had to grind the end of the riveted axle to dislodge it from the wheel housing. With the axle dislodged from the housing we were able to install the wheel and then hammer the end of the axle flat to keep in place, like the original rivet installation. It is not perfect but it held and should be fine. I am glad I was able to get the part and will be back in the future, if in need of other parts.
  • Ralph from Camillus, NY
  • Difficulty Level:
    A Bit Difficult
  • Total Repair Time:
    30 - 60 mins
  • Tools:
    Pliers, Screw drivers, Socket set
5 of 6 people found this instruction helpful.
Was this instruction helpful to you?
Thank you for voting!
Ice maker was over flowing filling the freezer with water and ice.
As per suggestion I replaced the water inlet valve.
I pulled out the refrigerator and removed the cardboard panel. I removed the water inlet unit by removing two screws. I used pliers to take off the the tubes to the ice maker and the water. Then removed the inlet supply tube. Installation was the reverse process.

However this did not fix the problem. After further research on another web site, I realized that the diagram that was furnished by PartSelect did not fit my refrigerator. What I really needed was the ice maker module. So I need to order the right one and I can't return the wrong part because I installed it. So I just left the lever in the ice maker in the up postion. the ice maker is still not working.
Other Parts Used:
Water Inlet Valve - 120V 60Hz Single Roller
  • William from Lone Tree, IA
  • Difficulty Level:
    Difficult
  • Total Repair Time:
    1- 2 hours
  • Tools:
    Pliers, Socket set
3 of 3 people found this instruction helpful.
Was this instruction helpful to you?
Thank you for voting!
  • 1
Questions and Answers

We're sorry, but our Q&A experts are temporarily unavailable.
Please check back later if you still haven't found the answer you need.

4 questions answered by our experts.
Sort by:
  • 1
Sorry, we couldn't find any existing answers that matched.Try using some different or simpler keywords, or submit your new question by using the "Ask a Question" button above!
Darlene
July 9, 2019
What are the dimensions ? I need replacement for back wheel. Thanks
For model number gx5shdxtq00
PartSelect logo
Hello Darlene, thank you for writing. This Single Roller is approximately 1.15" x 2" and is the correct replacement for your model.

3 people found this helpful.

Was this helpful?
Thank you for voting!
Marc
January 15, 2019
Wheel is held on with a press fitted flanged at one end bolt. I don’t see how i can get it off.
PartSelect logo
Hello Marc, thank you for contacting us, In order for us to locate the correct parts and repair information we will require the model number of the unit. Once you have located the model number please feel free to resubmit the question and we will be happy to help you. Look forward to hearing from you!

Was this helpful?
Thank you for voting!
William
July 6, 2021
Will these fit my Kenmore refrigerator
For model number 59672003014
PartSelect logo
Hello William, Thank you for contacting us. We have researched the model you have provided and have found the part you are looking for is PartSelect Number: PS11755876 for the Left Roller and PartSelect Number: PS11755875 for the Right Roller. We hope this helps!

Was this helpful?
Thank you for voting!
Related Parts:
Vega
June 12, 2023
Hello! The front wheel on the bottom of my Amana BR22TW fridge cracked and I would like to replace it. Is PS11738235 a suitable replacement part? If not, can you please help me find a suitable replacement? Thanks! Vega
For model number Amana BR22TW
PartSelect logo
Hello Vega, thank you for the great question. Yes, the part you have mentioned is a compatible replacement front wheel for your model. We hope this solves your problem!

Was this helpful?
Thank you for voting!
  • 1
You May Also Need ?
Model Cross Reference
This part works with the following models:
PartSelect Number: PS11738235
Manufacturer Part Number: WP10450603
Brand
Model Number
Description
Kenmore
10678586800
Refrigerator
Amana
2699A
Refrigerator
Amana
2699W
Refrigerator
Amana
57085-P1190813WE
Refrigerator - 20" SIDE BY SIDE REFRIGERATOR
Amana
57087-P1190815WL
Refrigerator - 20' SIDE BY SIDE REFRIGERATOR
Amana
57089-P1190814WE
Refrigerator - 20' SIDE BY SIDE REFRIGERATOR
Litton
58632
Refrigerator
Amana
58632-P1317501WW
Refrigerator - SIDE-BY-SIDE REFRIGERATOR
Litton
58635
Refrigerator
Amana
58635-P1317501WE
Refrigerator - SIDE-BY-SIDE REFRIGERATOR
Litton
58637
Refrigerator
Amana
58637-P1317501WL
Refrigerator - SIDE-BY-SIDE REFRIGERATOR
Kenmore
59650002100
Refrigerator
Kenmore
59650003100
Refrigerator
Kenmore
59650004100
Refrigerator
Kenmore
59650009100
Refrigerator
Kenmore
59650012100
Refrigerator
Kenmore
59650013100
Refrigerator
Kenmore
59650014100
Refrigerator
Kenmore
59650019100
Refrigerator
Kenmore
59650392000
Refrigerator
Kenmore
59650392001
Refrigerator
Kenmore
59650392990
Refrigerator
Kenmore
59650394000
Refrigerator
Kenmore
59650394001
Refrigerator
Kenmore
59650394990
Refrigerator
Kenmore
59650399000
Refrigerator
Kenmore
59650399001
Refrigerator
Kenmore
59650399990
Refrigerator
Kenmore
59650692000
Refrigerator
Customer Service Representative

Get in touch, we're here to help!

Monday to Saturday
8am - 9pm EST

Contact Customer Service