This temperature sensor, also known as a thermistor, is compatible with various makes and types of appliances. This thermistor uses electrical currents to detect the interior temperature of the appliance it is in and by working with the control board, the board adjusts the level of cooling or heating through its heating or cooling element, depending on what is needed. If your appliance is being improperly heated or cooled, the temperature sensor may be to blame, and can be tested with a multimeter to check for continuity to see whether it is defective. Check your user manual for exact placement of this thermistor and any diagnostic information.
How Buying OEM Parts Can Save You Time and Money
Troubleshooting
This part fixes the following symptoms:
Little to no heat when baking | Oven not heating evenly | Oven is too hot | Element will not heat
Keep searches simple. Use keywords, e.g. "leaking", "pump", "broken" or "fit".
Sorry, we couldn't find any existing reviews that matched. Try using some different or simpler keywords.
★★★★★
★★★★★
Thomas F - February 15, 2018
Verified Purchase
Part did not work , oven still not heating correctly
I emailed Parts Select and described what the issue was . They told me most likely it was the temperature sensor. I tested the ohms rating and the old one showed it was bad . I installed the one purchased from Parts Select and it didn't correct the problem. I emailed Parts Selet to ask what could be the problem . They said call the manufacture. They should have told me that when I asked the first time instead of just wanting to sell me the wrong or defective part . Read the fine print their 30 day no questions asked warranty does not include electrical parts . Thank You Parts Select
< Prev
1
Next >
Questions and Answers
Ask our experts a question about this part and we'll get back to you as soon as possible!
10 questions answered by our experts.
Sort by:
< Prev
1
Next >
Search filter:
Clear Filter
Your search term must have 3 or more characters.
Keep searches simple. Use keywords, e.g. "leaking", "pump", "broken" or "fit".
Sorry, we couldn't find any existing answers that matched.Try using some different or simpler keywords, or submit your new question by using the "Ask a Question" button above!
Paula
November 7, 2022
Would it cause the oven to read 100 degrees when you first turn it on and not to maintain the temp I set it on if it needs to be replaced?
For model number LG LRE30453SB/01
Hello Paula, thank you for the question. According to our research, the Temperature Sensor appears to be faulty, it measures and regulates the internal temperature of your oven cavity. We would recommend replacing it, the part number is PS11732697. If that does not help then the issue is likely to be with the Thermostat, part number PS3530468. If you require assistance placing an order, please contact customer service. We hope that helps!
after cleaning oven oven is clean but will no longer bake as code f9 keeps coming up -what is that telling me
For model number lre3021st
Hello Harold, thank you for reaching out. This error code indicates that the oven has failed to exceed 150 degrees Fahrenheit after five minutes of preheating. We would recommend you replace the relay control board, part number PS8751324, to fix the issue. We hope this solves your problem!
Hello Pat, thank you for your inquiry. According to our research, the issue is most probably with the oven control board, part number PS16223045. You may need to replace it to fix the issue. Glad to be of assistance!
Oven turns on but will not not heat and shows Code F9.
For model number LWS 3010ST
Hello Christine, thank you for the great question. According to our research, the F9 error code means the oven failed to exceed 150 degrees Fahrenheit after 5 minutes of preheating. We would recommend checking the temperature sensor, part number PS11732697, to fix the issue. Glad to be of help!
Was this helpful?
Thank you for voting!
Joe
December 5, 2023
The oven heats erratically, changes about 30 degrees either way. I get a dead short across the sensor pin slots. Manual says 1090 ohms plus/minus 10 %. Is the sensor bad and how is the oven working at all with the sensor way out?
For model number lre30453sb
Hello Joe, thank you for your inquiry. Based on the description that you have provided, we would recommend replacing the temperature sensor, part number PS11732697, to solve the problem. A faulty temperature sensor can send incorrect readings to the control board and the oven may start to heat erratically. We hope that helps!
Was this helpful?
Thank you for voting!
Bernard
October 7, 2021
What would be the cause for the igniter on the oven to come on but the oven don't light.
For model number LRG3095ST
Hello Bernard, Thank you for the question. This could be caused by a weak igniter. They can glow but not have enough ohms to open the valve. The igniter, there should be between 40 & 400 OHMS. We hope this helps!
Get code F11 on oven. Confirming that oven sensor needs replacement
Thank you
For model number LRG3091ST
Hello Lori, Thank you for your inquiry. This error code usually does indicate a failed oven sensor, but can also indicate a control board failure. You can test the sensor with a multimeter. If you are unfamiliar with how a multimeter functions, we have videos available to assist you. The sensor should test between 1000-1100 ohms. If the sensor tests good for continuity, then the issue may be with the main control board or one of the power supply boards. You can check the boards for any visible damage or loose connections. We hope this helps and if you need help placing an order, customer service is open 7 days a week. Please feel free to give us a call. We look forward to hearing from you!
Have F19 code ,is this the ignitor for the lower oven?
For model number LDG3016ST
Hello John, thank you for your inquiry. The error code F19 gets triggered when the oven fails to heat up to a minimum temperature within a specific amount of time. We suggest you replace the lower oven ignitor, part number PS3535362, to fix the issue. We hope this helps, good luck with this repair!
When I turn the top oven on the fan makes a horrible noise? Also , it doesnt seem to get to the correct temp
For model number lwd3010st
Hi Juliet, thank you for your inquiry. To solve the issue of the fan making noise, first, you may need to ensure that the fan is securely held in place. A noisy oven fan can be the result of a loose blade or a fixing nut. If that is not causing the issue, then you may need to replace the fan, part number PS3528621. The most likely cause of the oven not reaching the desired temperature is a faulty temperature sensor, part number PS11732697, which may need to be replaced. We hope this solves your problem!
I intermittently get the get the F9 error when heating my oven. After discounting the ignitors, I have concluded that it must be the temperature sensor. Problem is, I have ordered 2 sensors from 2 different companies and they sent me the same one which doesn't fit when I try to connect the new one. Both companies tell me that it is the correct part number for my model number. After research, the last company told me that it was found that they (LG) has updated that particular part. The connection is much smaller than the one in my oven and it won't connect. That seems so crazy that they would just change the part so that it won't fit. Do you have any suggestions? I have pictures if you would like them.
For model number LRG4113ST/00
Hi Teresa, thank you for reaching out. According to our research, the temperature sensor, part number PS11732697, fits your model. Replacing the temperature sensor will fix the issue. We hope this helps!
Was this helpful?
Thank you for voting!
< Prev
1
Next >
✖
Ask a Question
Ask our experts a question on this part and we'll respond as soon as we can.
