This dryer timer is used to control the unit's cycles by regulating the length of time that power is directed to each setting.
How Buying OEM Parts Can Save You Time and Money
Troubleshooting
This part fixes the following symptoms:
Timer Not Working
This part works with the following products:
Dryer.
This part works with the following products:
Maytag, Amana, Admiral, Roper.
Part# W10857612 replaces these:
AP6003908, W10436308, W10745655, W10857612VP
Customer Reviews
Average Rating:
★★★★★
★★★★★
3 Reviews
5.0
Filter By Rating:
5 Stars
3
4 Stars
0
3 Stars
0
2 Stars
0
1 Star
0
Sort by:
< Prev
1
Next >
Search filter:
Clear Filter
Your search term must have 3 or more characters.
Keep searches simple. Use keywords, e.g. "leaking", "pump", "broken" or "fit".
Sorry, we couldn't find any existing reviews that matched. Try using some different or simpler keywords.
★★★★★
★★★★★
William C - February 16, 2024
Verified Purchase
Less than 20 minutes and dryer is as good as new.
Easy replacement of timer switch. Very happy with the results.
★★★★★
★★★★★
GARY Y - March 18, 2022
Verified Purchase
easy
Easy install works great
★★★★★
★★★★★
Jude G - April 15, 2019
Verified Purchase
Worked perfectly
Delivered as promised and worked perfectly
< Prev
1
Next >
Customer Repair Stories
Average Repair Rating: 4.4 / 5.0, 1 reviews.
What's this?
Sort by:
< Prev
1
Next >
Search filter:
Clear Filter
Your search term must have 3 or more characters.
Keep searches simple. Use keywords, e.g. "leaking", "pump", "broken" or "fit".
Sorry, we couldn't find any existing installation instruction that matched.
My Dryer Timer broke off at the plastic part.
My son took the timer hood off with a Phillips, head screwdriver and replace the Timer. Then he put. Tim hood back on the dryer.
Gwendolyn from BAKER, LA
Difficulty Level:
Really Easy
Total Repair Time:
15 - 30 mins
Tools:
Screw drivers
2 of 2 peoplefound this instruction helpful.
Was this instruction helpful to you?
Thank you for voting!
< Prev
1
Next >
Questions and Answers
Ask our experts a question about this part and we'll get back to you as soon as possible!
7 questions answered by our experts.
Sort by:
< Prev
1
Next >
Search filter:
Clear Filter
Your search term must have 3 or more characters.
Keep searches simple. Use keywords, e.g. "leaking", "pump", "broken" or "fit".
Sorry, we couldn't find any existing answers that matched.Try using some different or simpler keywords, or submit your new question by using the "Ask a Question" button above!
DEBBIE
May 27, 2022
Do I need to purchase this whole part if the piece that the knob connects to is broken off?
For model number W10745655 A
Hi Debbie,
Thank you for your question. If the shaft that the knob inserts onto is broken, you will need to replace the timer. If you need help placing an order for it, customer service is open 7 days a week and anyone will be happy to assist you. Please feel free to give us a call. We look forward to hearing from you!
4 people found this helpful.
Was this helpful?
Thank you for voting!
Jo Ann
June 7, 2019
Dryer does not turn off unless you open the dryer door. Temperature is fine and it does dry the clothes. If i set my microwave timer for the correct amount of time then open the door the clothes are dry.
For model number RED4516FW0
Hi Jo Ann,
Thank you for your question. If the dryer is not shutting off, There are some parts that you will need to check to see which one is causing the issue. You will need to check the door switch, the timer, the internal bias thermostat and the high limit thermostat. I hope this helps. Thank you and have a great day!
4 people found this helpful.
Was this helpful?
Thank you for voting!
Steven
February 12, 2023
How to install dryer timer switch
For model number RED4516FWO
Hello Steven, thank you for reaching out. Please follow the steps below to replace the timer:
1. Remove the 1/4 screws holding the back cover.
2. Get a putty knife, insert it in each corner section, and pull the panel back.
3. Push down on the clips holding the timer.
4. Remove the timer knob.
5. Remove wires from the old timer and inset into the new timer.
6. Now follow the steps backward and put the machine together.
We hope this information helps!
2 people found this helpful.
Was this helpful?
Thank you for voting!
George
April 13, 2022
Amanda dryer motor hums when start button pressed. Appliance tech diagnosed frozen motor. Purchased new motor still same issue. Door switch clicks when pressed/ released. Any suggestions? Was going to replace timer switch but I can hear the timer working.
For model number NED4655EW1
Hello George, thank you for writing. We recommend replacing the Door Switch PS11750824. We have a video for you to access. If you need help placing an order, customer service is open 7 days a week. Please feel free to give us a call. We look forward to hearing from you.
my dryer goes on then shuts off. goes on by itself then shuts off. make wierd noise. possible problems?
For model number RED4526FW0
Hello John, thank you for the query. According to our research, you may need to replace the timer, part number PS11731366, to fix the issue. We hope this solves your problem!
Was this helpful?
Thank you for voting!
Thuan
November 9, 2023
How to remove and install dryer timer
For model number VED6505GW0
Hello Thuan, thank you for reaching out. Please follow the steps below to replace the timer:
1- Remove the 1/4 screws holding the back cover.
2- Get a putty knife, insert it in each corner section, and pull the panel back.
3- Push down on the clips holding the timer.
4- Remove the timer knob.
5- Remove wires from the old timer and inset into the new timer.
6- Now follow the steps backward and put the machine together.
We hope this information helps!
Was this helpful?
Thank you for voting!
Tyler
20 days ago
dryer does not put out heat I checked every other component with a multimeter and everything checks out and is running as it should was wondering if I change this part will it help with my no heat problem
For model number NED4655EW1
Hello Tyler, thank you for contacting us. Yes, the timer, part number PS11731366, might be defective. However, this is very rarely the case. Before replacing the timer, check all the more commonly defective parts. If you determine that all the other components are working properly, test the timer by using a multimeter and consulting the wiring diagram. If the timer is defective, replace it. We hope this helps, good luck with this repair!
Was this helpful?
Thank you for voting!
< Prev
1
Next >
✖
Ask a Question
Ask our experts a question on this part and we'll respond as soon as we can.
