This water inlet valve should be located behind the lower kickplate panel in either the right or left corner. The attaching solenoids on the valve open and close according to the desired amount of water needed. NOTE: As per the manufacture this part has been updated from the original part. You may need to order an elbow (# W10685193) for the new designed valve to work.
How Buying OEM Parts Can Save You Time and Money
Troubleshooting
This part fixes the following symptoms:
Will not fill with water | Leaking | Not cleaning dishes properly | Not draining
Ask our experts a question about this part and we'll get back to you as soon as possible!
11 questions answered by our experts.
< Prev
1
2
Next >
Sort by:
Search filter:
Clear Filter
Your search term must have 3 or more characters.
Keep searches simple. Use keywords, e.g. "leaking", "pump", "broken" or "fit".
Sorry, we couldn't find any existing answers that matched.Try using some different or simpler keywords, or submit your new question by using the "Ask a Question" button above!
Darrell
August 16, 2021
My unit is not filling, i have checked the input water to the water inlet valve and have sufficient water pressure. I removed the the valve and disassembled and found the inlet filter clogged with calcium deposits. Removed all the calcium deposits blocking the wire mesh filter and disassembled the rest of the valve with no further finding as far as the physical valve goes. I then checked the continuity of the solenoid coil and found its resistance to fluctuate in the meg ohms, i presume that this high resistance is not allowing the coil to properly energize and open the valve.So now my question is, what is the nominal resistance of the coil on a new part?? for reference. thank you in advance for your reply.
For model number DU800CWDB5
Hi Darrell,
Thank you for your question. When you have the multimeter set to the Rx1 setting, the reading for the water inlet valve should be between 100 and 1000 ohms. If the reading is over 1000 ohms, then you will need to replace the water inlet valve. We hope this helps! If you have any questions, please let us know.
4 people found this helpful.
Was this helpful?
Thank you for voting!
Curtis
October 7, 2017
Dishwasher starts, runs for about 2 minutes, then shuts off. Doesn’t appear to be filling with water
For model number KUDS24SEBS3
Hi Curtis, Thank you for the question. If the appliance will not fill with water I suggest replacing the Water Inlet Valve. If the valve is defective it will not let water through to fill the tub. Hope this helps!
2 people found this helpful.
Was this helpful?
Thank you for voting!
Josh
December 7, 2017
Water runs into dishwasher before cycle even starts continuously
For model number 665.13593K600
Hi Josh,
Thank you for your question. If your dishwasher is filling with water when it is not on then you will need to check the impeller as it may be worn down. You will also need to check the water inlet valve to see if it is working correctly as well. I hope this helps. Thank you and have a great day!
2 people found this helpful.
Was this helpful?
Thank you for voting!
Jared
February 1, 2018
My Whirlpool recently stopped filling up with water. It still heats up and drains when i put water in it but still no water and it doesn’t look like the water hole is clogged. I read the inlet valve might need to be changed. If that’s the case to i have to by the extra valve for the updated inlet valves now sold? Any help would be great.
For model number DU810DWGQ2
Hello Jared, thank you for your question. It does sound like the issue is the water valve. If no water is coming into the unit you can test the valve to see if its faulty before ordering. I would recommend ordering the Elbow Hose Fitting part number W10685193 just in case. Its hard to tell which models need the fitting and which ones do not. I hope this helps!
2 people found this helpful.
Was this helpful?
Thank you for voting!
Sascha
January 16, 2019
How do i know if i need the elbow it mentions?
For model number DU900PCDB6
Hello Sascha, thank you for your question. Unfortunately, its hard to determine which unit will need the elbow and which do not. However, we do know that If the valve does not use a standard hose type thread on the valve the adapter is used. Please see our installation video at the following link! I hope this helps! https://www.partselect.com/PS11730996-Whirlpool-W10844024-Water-Inlet-Valve.htm
1 person found this helpful.
Was this helpful?
Thank you for voting!
Ron
January 26, 2023
My 26-year-old KitchenAid dishwasher's original water inlet valve was OEM W10327248. I have replaced it once in the past with no problem; however, it has been replaced by W10844024. The problem is that the line taking the water to the dishwasher is now on the wrong side. (This is the line with the push-on hose and wire clamp.) Is there a way to use this part?
For model number KUDS24SEWH2
Hi Ron,
Thank you for your question. We have included a link to one of our YouTube videos that you may reference on how to install the water inlet valve. The washer in the video may appear different from yours, but it will give you a general idea on how to install the part. We hope this helps with the repair!
Was this helpful?
Thank you for voting!
Harmon
August 1, 2017
The water is not being pumped out of the dishwasher.Help
For model number RUD4000MQ0
Hi Harmon,
Thank you for the question. I suggest replacing the Pump and Motor Assembly, Part number PS11751019. This part supplies water to the spray arms and pumps the water out of the dishwasher.
Hope this helps!
Was this helpful?
Thank you for voting!
Andrew
May 21, 2023
I am having water pooling in the bottom of the dishwasher after it finishes running. I can hit drain/cancel and it will finish draining the remainder of the water.
Additionally, I took the panel off to observe while draining/running and it sprays a fine mist from the middle of dishwasher. Should I bother fixing this thing or just get a new one?
For model number DU960PWKT0
Hello Andrew, thank you for your inquiry. Based on the description that you have provided, we would recommend replacing the drain pump, part number PS3500989. Before replacing the pump, make sure the drain hose is properly aligned and the drain filter is clean. We hope this information is useful!
Water inlet valve, I need the outlet part that seats with the o ring and 4 little bolts hold it together I just need that little brass part on the end of the valve
For model number Rud4000mq0
Hello Tim, thank you for your question. The Valve PS11730996 only is sold as an assembly. We look forward to hearing from you.
Was this helpful?
Thank you for voting!
Dan
March 1, 2019
My dishwasher whistles after filling at start of cleaning cycle. After a few minutes whistling goes away and washer functions properly
For model number DU943PWKT0
Hi Dan, thank you for your question. Usually when you are getting a whining noise in your machine it has to do either with your drain pump or the motor of your appliance. I would suggest taking a look at those two parts first. I hope that helps. Good luck with your repair.
Was this helpful?
Thank you for voting!
< Prev
1
2
Next >
✖
Ask a Question
Ask our experts a question on this part and we'll respond as soon as we can.
Something went wrong. Please try again later.
Your Question Has Been Submitted!
Our experts will send you an email as soon as your question has been answered.
Part Videos
Replacing your Whirlpool Dishwasher Water Inlet Valve
Customer Repair Stories
Average Repair Rating: 3.9 / 5.0, 12 reviews.
What's this?
< Prev
1
2
Next >
Sort by:
Search filter:
Clear Filter
Your search term must have 3 or more characters.
Keep searches simple. Use keywords, e.g. "leaking", "pump", "broken" or "fit".
Sorry, we couldn't find any existing installation instruction that matched.
Water won't fill for washer to start.
Determined the problem to be the water inlet valve. Researched the Part Number per Google and Whirlpool Customer Service. Part Number W10844024 with connector recommend by video. I used U Tube video for PN W10844024 by this site to show me to the repair. It was excellent.
Very noisy on heavy wash cycles started and stopped when filling
repair was very easy did need to go to the hardware store for and adapter for the hose to water inlet valve as mine had a smaller diameter connector. Otherwise followed both videos. Needed a shopvac to remove water in the bottom of the dishwasher
After doing some research in a repair book I decided to take a stab with a water inlet valve. With expedited shipping I ordered the part and within three days it was delivered. I installed it and the dishwasher seemed like it was trying to fill but still would not. After much cocnsternation I turned the water supply valve to the dishwasher a partial turn to close and I felt the water rush through the valve and the dishwasher then filled. Apparently the shut off valve must have been clogged plus it now leaked. I then replaced the shutoff valve and the copper pipe to the water inlet valve with flexible 3/8" tubing and the dishwasher thus far is running fine without leaks.
Robert from Waldoboro, ME
Difficulty Level:
Really Easy
Total Repair Time:
15 - 30 mins
Tools:
Wrench (Adjustable)
19 of 25 peoplefound this instruction helpful.
Was this instruction helpful to you?
Thank you for voting!
Water in bottom of dishwasher
Disconnected power. Shut off water supply. Took off the front, disconnected copper supply line and flexible water line, removed water inlet valve. Took elbow from old inlet valve and put in on new one. Put new valve in, reconnected water lines, put back front panel. Opened water supply, Flipped breaker back on. Done and it worked!
disconnected the water, removed the old valve put in new valve and waah laah it worked .
ANTHONY from MANITOWOC, WI
Difficulty Level:
Really Easy
Total Repair Time:
Less than 15 mins
Tools:
Screw drivers, Wrench set
2 of 9 peoplefound this instruction helpful.
Was this instruction helpful to you?
Thank you for voting!
Dishwasher wouldn't fill
I thought that the valve inlet was defective. Ordered the replacement, got it in one day, replaced the part... and it worked perfectly. Saved big $$ in a service call. Found everything I needed online.
Arnie from Michigan City, IL
Difficulty Level:
Easy
Total Repair Time:
15 - 30 mins
Tools:
Pliers, Screw drivers
36 of 47 peoplefound this instruction helpful.
Was this instruction helpful to you?
Thank you for voting!
Bad Water Inlet Valve
No Water supply to Dishwasher. Turned off main Supply valve under sink.First took off old Diswasher supply valve and repaired it by cleaning it and it worked for two weeks. I ordered the part, but then cancelled it and Partselect service was great and cancelled it immediately. After it went down after 2 weeks I re-ordered it and it came in 4 days. To Take this part off I removed mounting scews with nut driver, disconeected electronic plug connector, removed the compression fitting from the water supply and removed the outlet hose..reversed all of the above to install.
Stephen from Park Ridge, NJ
Difficulty Level:
Easy
Total Repair Time:
15 - 30 mins
Tools:
Nutdriver, Pliers, Screw drivers, Wrench (Adjustable), Wrench set
4 of 6 peoplefound this instruction helpful.
Was this instruction helpful to you?
Thank you for voting!
Old valve failed and started to leak.
Pulled off the old valve using a crescent wrench and screw driver. The replacement part was a 100% exact match. Slapped on the new valve and that baby was water tight. $50 on a new valve is a lot better than $500 for a new washer.
Partselect.com was so easy to use and find the right part. Way more helpful than whirlpool's site, but that's not surprising seeing as they have an "authorized repair technician" page.
Thanks Partselect.com!
Adam from Minneapolis, MN
Difficulty Level:
Really Easy
Total Repair Time:
15 - 30 mins
Tools:
Pliers, Screw drivers, Wrench (Adjustable)
8 of 12 peoplefound this instruction helpful.
Was this instruction helpful to you?
Thank you for voting!
No water coming into dishwasher
I unscrewed the old water inlet valve from the frame of the dishwasher so that I could manuever my hand around to the backside where the rubber hose was connected. That was the easy part. I then had trouble holding the old valve while trying to unscrew the hot water copper tubing so I screwed it back on the frame. My dishwasher is close to 18 years old and I think that was part of the problem. After soaking in WD40, I finally got the valve out. Then I had to remove the "L" shaped connector to put on the new valve. Everything went back together a lot faster and it's like I have a new dishwasher again. By the way, I am a 53 year old female so that may be why it took me so long.
Terry from Wharton, TX
Difficulty Level:
A Bit Difficult
Total Repair Time:
30 - 60 mins
Tools:
Pliers, Wrench set
11 of 12 peoplefound this instruction helpful.
Was this instruction helpful to you?
Thank you for voting!
Valve was leaking from plastic after water line change
Turned of water and unplugged the dishwasher. Disconnected the incoming water line. Drained on to the floor (have paper towels ready) Disconnected the electrical feed wire. Disconnected the rubber hose. Unscrewed screw holding the fixture to the frame. Took off the brass elbow from the old part. Put pipedope around it and screwed into new part (carefully, so as to not crack plastic again). Attached part back to frame. Attached water lines. Turned on water, plugged it in and ran dishwasher looking for leaks. No problem.
Nathaniel from Chelsea, MA
Difficulty Level:
A Bit Difficult
Total Repair Time:
15 - 30 mins
Tools:
Pliers, Socket set
17 of 26 peoplefound this instruction helpful.
Was this instruction helpful to you?
Thank you for voting!
< Prev
1
2
Next >
Customer Reviews
Average Rating:
★★★★★
★★★★★
15 Reviews
4.3
Filter By Rating:
5 Stars
9
4 Stars
3
3 Stars
2
2 Stars
0
1 Star
1
< Prev
1
2
Next >
Sort by:
Search filter:
Clear Filter
Your search term must have 3 or more characters.
Keep searches simple. Use keywords, e.g. "leaking", "pump", "broken" or "fit".
Sorry, we couldn't find any existing reviews that matched. Try using some different or simpler keywords.
★★★★★
★★★★★
Larry K - September 24, 2022
Verified Purchase
Easy repair great part
Part great condition. Came quick. Appliance back in working order
★★★★★
★★★★★
Ivelisse B - November 28, 2020
Verified Purchase
Worked beautifully!
First,I received the part in a few days and I was expecting delays so I was pleasantly surprised. The part worked like a charm no more leaks! I should have bought the adapter that was recommended but found one at a local hardware easily. Thanks!
★★★★★
★★★★★
Jeffrey B - November 22, 2020
Verified Purchase
Excellent experience
The part was great and came fast. My appliance is back in working condition.
★★★★★
★★★★★
Charlene P - July 15, 2020
Verified Purchase
Part Didn't Fit
the original part for my dishwasher had a hose-type end but the new part did not. I had a hose end that fit the part so was able to use. After switching out the part works fine.
★★★★★
★★★★★
Derek D - December 6, 2019
Verified Purchase
Oof
Part was the part I ordered went on easy enough but didn't have the converter piece to attach the hose to. Pretty sure it wasn't the part I needed anyways so said screw it and took a hammer, screwdriver and bolt cutters and now I have a nice new shelf in my kitchen...
★★★★★
★★★★★
Adrian H - November 14, 2019
Verified Purchase
Misleading
Part shown in picture is not the part I received. Come to find out I needed an additional adapter piece so I had to pay an extra shipping.
★★★★★
★★★★★
Suzanne B - March 27, 2019
Verified Purchase
Spot on
Part fit perfectly. Associate helped me find the right part since the part # changed. A bit pricey though. But knowing it works is worth it.
★★★★★
★★★★★
Christine C - February 25, 2019
Verified Purchase
Worked well with an adapter.
Part is as shown. Needed to get an adapter to make the connection fit but other than that, the part worked well.
★★★★★
★★★★★
Andrew C - February 22, 2019
Verified Purchase
Fixed the leak!
After having severe cold temps, there was a freeze in the line, due to being on an outside wall. After it thawed, there was a consistent leak from the dishwasher which fortunately was solved on first try fortunately with the Water Inlet Valve.
★★★★★
★★★★★
RONALD D - January 28, 2019
Verified Purchase
Easy Repair
My part was great, and I had it installed In 15 minutes. Recommended you buy the elbow with this part.
< Prev
1
2
Next >
Model Cross Reference
This part works with the following models:
PartSelect Number: PS11730996
Manufacturer Part Number: W10844024
With the Fix app, you can quickly and easily find information on your appliance, along with videos and articles to help you fix it.
"Like magic. I took a picture of the model number on my refrigerator, and the app identified it right away … Very convenient. I'm impressed." ★★★★★ - Clever Jeff
★★★★★
You added 1 item to your cart
✖
$
Qty:
Total item(s) in cart:
Order Subtotal
$
*Taxes and shipping will be applied during checkout
Your Subscriptions
Same-day Shipping
Ships from USA
1 Year Warranty
365 Day Returns
