Maytag/Maytag_Thumb/OAXZ05N9.gif
See part 16 in the diagram
Replacing your Whirlpool Dishwasher Water Inlet Valve play video
( Grid squares measure 1x1 inch )

Get in touch, we're here to help!

Open until 12am EST

customerservice@partselect.com

Water Inlet Valve

★★★★★
★★★★★
14 Reviews
$60.29   In Stock

Get this part fast. Average delivery time via standard shipping: 1.8 days.

PartSelect Number PS11730996
Manufacturer Part Number W10844024
Manufactured by Whirlpool
Product Description

Water Inlet Valve Specifications

This water inlet valve should be located behind the lower kickplate panel in either the right or left corner. The attaching solenoids on the valve open and close according to the desired amount of water needed. NOTE: As per the manufacture this part has been updated from the original part. You may need to order an elbow (# W10685193) for the new designed valve to work.
How Buying OEM Parts Can Save You Time and Money play video

How Buying OEM Parts Can Save You Time and Money

Troubleshooting
This part fixes the following symptoms:
Will not fill with water | Leaking | Not cleaning dishes properly | Not draining
This part works with the following products:
Dishwasher.
This part works with the following products:
Whirlpool, Kenmore, KitchenAid, Estate.
Part# W10844024 replaces these:
AP5989613, 3378779, 3379356, 3384890, 8274221, 8283345, 8283346, 9743175, 9743559, 9744029, 9744284, 9744468, W10219643, W10327248, W10844024VP, WP9744468, WPW10219643
Questions and Answers

We're sorry, but our Q&A experts are temporarily unavailable.
Please check back later if you still haven't found the answer you need.

8 questions answered by our experts.
    Sort by:
    Sorry, we couldn't find any existing answers that matched.Try using some different or simpler keywords, or submit your new question by using the "Ask a Question" button above!
    Curtis
    October 7, 2017
    Dishwasher starts, runs for about 2 minutes, then shuts off. Doesn’t appear to be filling with water
    For model number KUDS24SEBS3
    Hi Curtis, Thank you for the question. If the appliance will not fill with water I suggest replacing the Water Inlet Valve. If the valve is defective it will not let water through to fill the tub. Hope this helps!

    2 people found this helpful.

    Was this helpful?
    Thank you for voting!
    Josh
    December 7, 2017
    Water runs into dishwasher before cycle even starts continuously
    For model number 665.13593K600
    Hi Josh, Thank you for your question. If your dishwasher is filling with water when it is not on then you will need to check the impeller as it may be worn down. You will also need to check the water inlet valve to see if it is working correctly as well. I hope this helps. Thank you and have a great day!

    2 people found this helpful.

    Was this helpful?
    Thank you for voting!
    Jared
    February 1, 2018
    My Whirlpool recently stopped filling up with water. It still heats up and drains when i put water in it but still no water and it doesn’t look like the water hole is clogged. I read the inlet valve might need to be changed. If that’s the case to i have to by the extra valve for the updated inlet valves now sold? Any help would be great.
    For model number DU810DWGQ2
    Hello Jared, thank you for your question. It does sound like the issue is the water valve. If no water is coming into the unit you can test the valve to see if its faulty before ordering. I would recommend ordering the Elbow Hose Fitting part number W10685193 just in case. Its hard to tell which models need the fitting and which ones do not. I hope this helps!

    2 people found this helpful.

    Was this helpful?
    Thank you for voting!
    Sascha
    January 16, 2019
    How do i know if i need the elbow it mentions?
    For model number DU900PCDB6
    Hello Sascha, thank you for your question. Unfortunately, its hard to determine which unit will need the elbow and which do not. However, we do know that If the valve does not use a standard hose type thread on the valve the adapter is used. Please see our installation video at the following link! I hope this helps! https://www.partselect.com/PS11730996-Whirlpool-W10844024-Water-Inlet-Valve.htm

    1 person found this helpful.

    Was this helpful?
    Thank you for voting!
    Darrell
    August 16, 2021
    My unit is not filling, i have checked the input water to the water inlet valve and have sufficient water pressure. I removed the the valve and disassembled and found the inlet filter clogged with calcium deposits. Removed all the calcium deposits blocking the wire mesh filter and disassembled the rest of the valve with no further finding as far as the physical valve goes. I then checked the continuity of the solenoid coil and found its resistance to fluctuate in the meg ohms, i presume that this high resistance is not allowing the coil to properly energize and open the valve.So now my question is, what is the nominal resistance of the coil on a new part?? for reference. thank you in advance for your reply.
    For model number DU800CWDB5
    Hi Darrell, Thank you for your question. When you have the multimeter set to the Rx1 setting, the reading for the water inlet valve should be between 100 and 1000 ohms. If the reading is over 1000 ohms, then you will need to replace the water inlet valve. We hope this helps! If you have any questions, please let us know.

    1 person found this helpful.

    Was this helpful?
    Thank you for voting!
    Harmon
    August 1, 2017
    The water is not being pumped out of the dishwasher.Help
    For model number RUD4000MQ0
    Hi Harmon, Thank you for the question. I suggest replacing the Pump and Motor Assembly, Part number PS11751019. This part supplies water to the spray arms and pumps the water out of the dishwasher. Hope this helps!

    Was this helpful?
    Thank you for voting!
    Dan
    March 1, 2019
    My dishwasher whistles after filling at start of cleaning cycle. After a few minutes whistling goes away and washer functions properly
    For model number DU943PWKT0
    Hi Dan, thank you for your question. Usually when you are getting a whining noise in your machine it has to do either with your drain pump or the motor of your appliance. I would suggest taking a look at those two parts first. I hope that helps. Good luck with your repair.

    Was this helpful?
    Thank you for voting!
    Dawn White
    July 22, 2019
    Is there a seal in the water inlet that i can replace if it’s leaking out of the front plate or do i have to replace the whole part
    For model number DUBOOCWDB5
    Hello Dawn, thank you for inquiring. You would have to replace the whole Water Inlet Valve. This part number PS11730996 is the correct replacement for your model.

    Was this helpful?
    Thank you for voting!
      Part Videos

      Replacing your Whirlpool Dishwasher Water Inlet Valve

      Replacing your Whirlpool Dishwasher Water Inlet Valve play video
      Customer Repair Stories
       Average Repair Rating: 3.9 / 5.0, 12 reviews. What's this?
      Sort by:
      Sorry, we couldn't find any existing installation instruction that matched.
      Water in bottom of dishwasher
      Disconnected power. Shut off water supply. Took off the front, disconnected copper supply line and flexible water line, removed water inlet valve. Took elbow from old inlet valve and put in on new one. Put new valve in, reconnected water lines, put back front panel. Opened water supply, Flipped breaker back on. Done and it worked!
      • Chris from Pompano Beach, FL
      • Difficulty Level:
        Really Easy
      • Total Repair Time:
        15 - 30 mins
      • Tools:
        Nutdriver, Wrench (Adjustable)
      • Parts Used:
        W10844024, WP489069
      61 of 454 people found this instruction helpful.
      Was this instruction helpful to you?
      Thank you for voting!
      Inlet valve was leaking from crack in brass fitting
      Removed the lower panels from beneath the dishwasher door. 4 screws. Turned off the water.

      Removed one screw holding the inlet valve to the side rail of the dishwasher. It was attached to the hot water line and then the washer water input line. Removed the electrical connector..Pull straight off, and use a pair of pliers to open the squeeze clamp on the washer hose. The hot water supply hose has a brass fitting to loosen and remove.

      Replaced the inlet valve, reconnected the electrical and also replaced the hot water line from under the sink to the washer. Used a new braided 5' hose with fittings. Used teflon tape on the screws and did not over tighten the brass fittings.

      Turned on the hot water supply and checked for leaks. Operated the washer and checked for leaks. Replaced the lower covers.
      • David from Lexington, NC
      • Difficulty Level:
        Really Easy
      • Total Repair Time:
        15 - 30 mins
      • Tools:
        Nutdriver, Pliers, Screw drivers, Wrench (Adjustable)
      • Parts Used:
        W10844024
      38 of 42 people found this instruction helpful.
      Was this instruction helpful to you?
      Thank you for voting!
      Dishwasher wouldn't fill
      I thought that the valve inlet was defective. Ordered the replacement, got it in one day, replaced the part...
      and it worked perfectly. Saved big $$ in a service call. Found everything I needed online.
      • Arnie from Michigan City, IL
      • Difficulty Level:
        Easy
      • Total Repair Time:
        15 - 30 mins
      • Tools:
        Pliers, Screw drivers
      • Parts Used:
        W10844024
      35 of 45 people found this instruction helpful.
      Was this instruction helpful to you?
      Thank you for voting!
      Dishwasher would not fill with water.
      After doing some research in a repair book I decided to take a stab with a water inlet valve. With expedited shipping I ordered the part and within three days it was delivered. I installed it and the dishwasher seemed like it was trying to fill but still would not. After much cocnsternation I turned the water supply valve to the dishwasher a partial turn to close and I felt the water rush through the valve and the dishwasher then filled. Apparently the shut off valve must have been clogged plus it now leaked. I then replaced the shutoff valve and the copper pipe to the water inlet valve with flexible 3/8" tubing and the dishwasher thus far is running fine without leaks.
      • Robert from Waldoboro, ME
      • Difficulty Level:
        Really Easy
      • Total Repair Time:
        15 - 30 mins
      • Tools:
        Wrench (Adjustable)
      • Parts Used:
        W10844024
      18 of 24 people found this instruction helpful.
      Was this instruction helpful to you?
      Thank you for voting!
      Valve was leaking from plastic after water line change
      Turned of water and unplugged the dishwasher.
      Disconnected the incoming water line.
      Drained on to the floor (have paper towels ready)
      Disconnected the electrical feed wire.
      Disconnected the rubber hose.
      Unscrewed screw holding the fixture to the frame.
      Took off the brass elbow from the old part.
      Put pipedope around it and screwed into new part (carefully, so as to not crack plastic again).
      Attached part back to frame.
      Attached water lines.
      Turned on water, plugged it in and ran dishwasher looking for leaks. No problem.
      • Nathaniel from Chelsea, MA
      • Difficulty Level:
        A Bit Difficult
      • Total Repair Time:
        15 - 30 mins
      • Tools:
        Pliers, Socket set
      • Parts Used:
        W10844024
      17 of 26 people found this instruction helpful.
      Was this instruction helpful to you?
      Thank you for voting!
      inlet valve cracked
      I first removed the old part. when i removed the old part i could not get the conector piece off when i when to get a new one they told me i should replace the copper tubing with the more flexable tubing because the copper tubing can kink up and possibly break from the kinking. so i screwed the inlet valve on i put teflon tape on the all the threads of the conector piece screwed it into the new inlet valve with and adjustable wrench then i conected the new tubing, and tightend it down with the wrench i slowly turned the water back on to cheak for leaks. When i saw there were no leaks i turned the water on the rest of the way pushed the dishwasher back in and screwed it into place an i was done.
      • Victoria from Clarksville, TN
      • Difficulty Level:
        A Bit Difficult
      • Total Repair Time:
        15 - 30 mins
      • Tools:
        Socket set, Wrench (Adjustable)
      • Parts Used:
        W10844024
      12 of 23 people found this instruction helpful.
      Was this instruction helpful to you?
      Thank you for voting!
      No water coming into dishwasher
      I unscrewed the old water inlet valve from the frame of the dishwasher so that I could manuever my hand around to the backside where the rubber hose was connected. That was the easy part. I then had trouble holding the old valve while trying to unscrew the hot water copper tubing so I screwed it back on the frame. My dishwasher is close to 18 years old and I think that was part of the problem. After soaking in WD40, I finally got the valve out. Then I had to remove the "L" shaped connector to put on the new valve. Everything went back together a lot faster and it's like I have a new dishwasher again. By the way, I am a 53 year old female so that may be why it took me so long.
      • Terry from Wharton, TX
      • Difficulty Level:
        A Bit Difficult
      • Total Repair Time:
        30 - 60 mins
      • Tools:
        Pliers, Wrench set
      • Parts Used:
        W10844024
      11 of 12 people found this instruction helpful.
      Was this instruction helpful to you?
      Thank you for voting!
      Old valve failed and started to leak.
      Pulled off the old valve using a crescent wrench and screw driver. The replacement part was a 100% exact match. Slapped on the new valve and that baby was water tight. $50 on a new valve is a lot better than $500 for a new washer.

      Partselect.com was so easy to use and find the right part. Way more helpful than whirlpool's site, but that's not surprising seeing as they have an "authorized repair technician" page.

      Thanks Partselect.com!
      • Adam from Minneapolis, MN
      • Difficulty Level:
        Really Easy
      • Total Repair Time:
        15 - 30 mins
      • Tools:
        Pliers, Screw drivers, Wrench (Adjustable)
      • Parts Used:
        W10844024
      8 of 12 people found this instruction helpful.
      Was this instruction helpful to you?
      Thank you for voting!
      Water won't fill for washer to start.
      Determined the problem to be the water inlet valve. Researched the Part Number per Google and Whirlpool Customer Service. Part Number W10844024 with connector recommend by video. I used U Tube video for PN W10844024 by this site to show me to the repair. It was excellent.
      • Larry from VANCOUVER, WA
      • Difficulty Level:
        Easy
      • Total Repair Time:
        30 - 60 mins
      • Tools:
        Nutdriver, Pliers, Screw drivers, Wrench (Adjustable)
      • Parts Used:
        W10844024, W10685193
      4 of 6 people found this instruction helpful.
      Was this instruction helpful to you?
      Thank you for voting!
      Bad Water Inlet Valve
      No Water supply to Dishwasher. Turned off main Supply valve under sink.First took off old Diswasher supply valve and repaired it by cleaning it and it worked for two weeks. I ordered the part, but then cancelled it and Partselect service was great and cancelled it immediately. After it went down after 2 weeks I re-ordered it and it came in 4 days.
      To Take this part off I removed mounting scews with nut driver, disconeected electronic plug connector, removed the compression fitting from the water supply and removed the outlet hose..reversed all of the above to install.
      • Stephen from Park Ridge, NJ
      • Difficulty Level:
        Easy
      • Total Repair Time:
        15 - 30 mins
      • Tools:
        Nutdriver, Pliers, Screw drivers, Wrench (Adjustable), Wrench set
      • Parts Used:
        W10844024
      4 of 6 people found this instruction helpful.
      Was this instruction helpful to you?
      Thank you for voting!
      Customer Reviews
      Average Rating:
      ★★★★★
      ★★★★★
      14 Reviews
      4.2
      Filter By Rating:
      • 5 Stars
        8
      • 4 Stars
        3
      • 3 Stars
        2
      • 2 Stars
        0
      • 1 Star
        1
      Sort by:
      Sorry, we couldn't find any existing reviews that matched. Try using some different or simpler keywords.
      Related Parts
      Model Cross Reference
      This part works with the following models:
      PartSelect Number: PS11730996
      Manufacturer Part Number: W10844024
      Brand
      Model Number
      Description
      Kenmore
      110723120
      Dishwasher
      Kenmore
      110773811
      Dishwasher
      Kenmore
      110773812
      Dishwasher
      Kenmore
      110773813
      Dishwasher
      Kenmore
      110773881
      Dishwasher
      Kenmore
      110773882
      Dishwasher
      Kenmore
      110773883
      Dishwasher
      Kenmore
      65715755791
      Dishwasher - Kenmore Dishwasher Model 657.15755791 (65715755791, 657 15755791) Parts
      Kenmore
      66513206K902
      Dishwasher
      Kenmore
      66513402K900
      Dishwasher
      Kenmore
      66513402K901
      Dishwasher
      Kenmore
      66513409K900
      Dishwasher
      Kenmore
      66513409K901
      Dishwasher
      Kenmore
      66513442K900
      Dishwasher
      Kenmore
      66513442K901
      Dishwasher
      Kenmore
      66513443K900
      Dishwasher
      Kenmore
      66513443K901
      Dishwasher
      Kenmore
      66513444K900
      Dishwasher
      Kenmore
      66513444K901
      Dishwasher
      Kenmore
      66513449K900
      Dishwasher
      Kenmore
      66513449K901
      Dishwasher
      Kenmore
      66513492K600
      Dishwasher
      Kenmore
      66513499K600
      Dishwasher
      Kenmore
      66513592K600
      Dishwasher
      Kenmore
      66513593K600
      Dishwasher
      Kenmore
      66513594K600
      Dishwasher
      Kenmore
      66513599K600
      Dishwasher
      Kenmore
      66513692K600
      Dishwasher
      Kenmore
      66513699K600
      Dishwasher
      Kenmore
      66513922K010
      Dishwasher - Kenmore Dishwasher Model 665.13922K010 (66513922K010, 665 13922K010) Parts

      Get in touch, we're here to help!

      Open until 1am EST

      Contact Customer Service