Quick Question!

Have you ever purchased from PartSelect.com before?

11730901-1-S-Whirlpool-W10823511-Water Tube Kit
11730901-1-S-Whirlpool-W10823511-Water Tube Kit 11730901-2-S-Whirlpool-W10823511-Water Tube Kit https://partselectcom.azureedge.net/Schematics/Maytag/11781.gif

Water Tube Kit

Your Price

Order within the next 11 hrs and your part ships today!
Get this part fast. Average delivery time via standard shipping: 1.8 days.

PartSelect Number PS11730901
Manufacturer Part Number W10823511
Manufactured by Whirlpool

This tubing is 1/4'' in diameter and comes with 2 inserts. This tubing may be longer than the original, and may have to be cut.

This part works with the following brands: Kenmore, Whirlpool, KitchenAid, Amana, Maytag, Roper, Estate, Crosley, Inglis, Jenn-Air, General Electric, Gaggenau, Gibson, International, Thermador.

This part works with the following products: Refrigerator, Ice Maker, Freezer, Dryer.

This part fixes the following symptoms:

  • Leaking.
  • Ice maker not making ice.
  • Not dispensing water.

Videos For installing this part.

Questions & Answers

Ask our experts a question on this part and we'll respond as soon as we can.

Most Helpful


I need the plastic water line that connects the main water line to the water filter housing,the small tapered end to the housing has a small hole and is leaking.I have replaced the housing.

Rickey for model number MSF25D2EAB00

Hello Rickey, Thank you for your inquiry. The part number to the water filter inlet tube is WPW10281289, which brings the water into the water filter. Hope this helps!

2 people found this helpful.

Water leaking from back of freezer under the cold air outlet sheet of ice in freezer

Michael for model number WRT771REYW00

Hi Michael, Thank you for your question. There could be a couple of parts that would cause that issue. I would suggest looking at your ice maker and looking at the fill tube to the ice maker. It is possible that leaking is being caused because your fill tube is clogged with ice. Good luck with your repair.

1 person found this helpful.

Most Recent


Unit runs and it makes ice, but it does not make large ice cubes and I have noticed that the it does not keep the tank full of water and the pump is making a sloppy sound like it is starving for water.

Walt for model number KUIS18NNJB5

Hi Walt, Thank you for the question. Sounds like you might have a defective water inlet valve. Replacing the water valve should fix the issue. Good luck with the repair!

Related Parts: Water Inlet Valve

Does this have a reducer on the end to go into the valve control?


Hi Joe, Thank you for your inquiry. No, this part is just your water line. Good luck with your repair.

Installation Instructions Provided by PartSelect customers like you.

Average Repair Rating: 3.4 / 5.0, 5 reviews What's this?
1-5 of 5

58 of 88 people found this instruction helpful

Parts Used:
Level of Difficulty: Really Easy
Time to do repair: 15 - 30 mins
Tools: Nutdriver, Screw drivers
Customer: Trent from Tacoma, WA

Water dispenser started leaking

i wasn't sure it was the inlet valve unit because the leak was at the water dispenser in the freezer door. after some research it looked like the water inlet valve located in the back lower part of the refrigerator was the problem. to replace, take off the cardboard cover, about 6 screws, you have access to the water inlet valve, disconnect the hoses (i think it goes without saying that you should have turned off the water to the frig) replace the inlet valve, connect hoses, turn water back on and you'll be back in business. very easy repair.

Help other customers find the most helpful instructions.

Were these instructions helpful?   

16 of 24 people found this instruction helpful

Parts Used:
  • Water Tube Kit
Level of Difficulty: Really Easy
Time to do repair: 30 - 60 mins
Tools: Nutdriver, Pliers, Screw drivers
Customer: jesse from hacienda heights, CA

Water began to leak under the refrigerator. Source looked like it was coming from control valve suppling water to ice maker and water dispenser.

Followed instructions supplied. It was relatively easy and the parts fit exactly right. Sears wanted twice as much for the part and service would have charged me another $100 to come to my home. I saved over $100 doing the project myself.

Help other customers find the most helpful instructions.

Were these instructions helpful?   

17 of 35 people found this instruction helpful

Parts Used:
Level of Difficulty: Easy
Time to do repair: 1- 2 hours
Tools: Screw drivers
Customer: Jerry from Boulder, CO

The ice maker would not work.

We rolled the refrigerator out away from the wall and it was obvious where the break was located. We took out the old water spout for the ice maker and replaced the tube and the tubing from the solenoid. We turned it on and soon we had water dripping everywhere. We unloaded and defrosted the freezer which got all of the remaining ice that was stuck in there. We put everything back together. I read in some instructions in the manual that it might take 24 hours for the ice maker to reprogram itself and start producing ice. I was only about 12 hours and we had ice again and everything worked well. You really do not have to disconnect the water from the main line, the solinoid controls that part of operation and turns the water off until the ice trays are free and clear.


Help other customers find the most helpful instructions.

Were these instructions helpful?   

4 of 6 people found this instruction helpful

Parts Used:
  • Water Tube Kit
Level of Difficulty: Really Easy
Time to do repair: 30 - 60 mins
Tools: Nutdriver, Pliers, Screw drivers
Customer: Monica from EDMOND, OK

Water leaked when the paddel was pushed

Followed the video on parts page. I was worried I would brake the cover but learned from the video the right way to remove the front plate. I found the video very informing. Thank you for saving me a service call and the part cost was minimal compared to a new refrigerator .

Help other customers find the most helpful instructions.

Were these instructions helpful?   

1 of 1 people found this instruction helpful

Parts Used:
Level of Difficulty: A Bit Difficult
Time to do repair: 30 - 60 mins
Tools: Nutdriver
Customer: Jason from CHAMPAIGN, IL

Ice maker leaking water, and not making ice

Remove the cardboard back cover and the vertical metal strip, all the screws are the same on the back. Remove the front bottom cover, those screws are all the same but longer. The tubing is bad because they tucked it in on the side and it rubbed and wore a hole in it. Remove the tubing nut. You may notice that there is an insert in the tubing, but the new tubing has no insert because it is thicker walled and does not the insert because it is stronger. The nut and compression ring are one piece. Open the front door and pull the tube out of the metal plate to the left, and cut the tube off at the end to remove the metal ring, and to make it easier to pull it out. Pull the tube out from the back, but first carefully remove the sticky gray putty, and put it aside. You might also bend the copper line to the right a little if it is putting pressure on the tube at the top of the unit. Now pull the tubing out, and use it to make the new tube the proper length, You might also want to first tape the new tube to the old tube to fish it through. I did not. It was tricky fishing the tube in from the back of the unit to the resevoir. If you do it my way, then aim it to the right. I got it on the second try and felt lucky. Once you get the tube in there, put the metal ring back on the new tube, and press it into the metal plate to the right. You can feel the groove and hole in the metal plate. I think the metal ring goes under the plate, but honestly I don't think you need the ring on the new tube because it has a thicker wall and is stiffer, so it won't pop out. Make sure you put the putty back in once you have completely installed the tubing. I think this is important to keep the tubing from sweating and to help keep the ice bin cold, like insulation. Do not put the tubing back along the left side of the unit, or you will be replacing it again, but maybe not with the thicker walled tubing. When you are all done, check to make sure your sump pump works by pouring water into the ice tub, if it is plugged in and you do not hear the pump, or the water backs up, then your pump may be bad. I also pulled a piece of white plastic out of the clear tubing just above the pump and never did find where that came from, but it would have been from the ice bin. I then ran a cleaning cycle and the instructions say if there was water still in the resevoir, then do another cleaning. My resevoir was full, so I did another cleaning. IF YOUR RESEVOIR IS FULL, THEN YOU NEED A NEW UPPER PUMP! Mine is on order. Mine was full after both cleanings, and after trying to make ice, I realized what the problem was. It could be that it is very clogged, but they don't appear to be serviceable, and I never heard it try to run. I did hear the lower pump, compressor, and fan all run previously, so I hope that when the new pump is installed, the unit is not low on refrigerant or anything like that. Fingers crossed, and good luck.

Help other customers find the most helpful instructions.

Were these instructions helpful?   

1-5 of 5

Model Cross Reference

This part works with the following models:

PartSelect Number: PS11730901
Manufacturer Part Number: W10823511
Brand Model Number Description
Kenmore1064689482991Ice Maker
Kenmore10650029213Refrigerator - REFRIGERATOR