Range Surface Element Control Switch Specifications
The control switch turns the surface element on and off and controls how much heat the element produces.
How Buying OEM Parts Can Save You Time and Money
Troubleshooting
This part fixes the following symptoms:
Element will not heat | Oven is too hot
This part works with the following products:
Range.
Part# WB24X25013 replaces these:
AP5999509
Customer Reviews
Average Rating:
★★★★★
★★★★★
47 Reviews
5.0
Filter By Rating:
5 Stars
47
4 Stars
0
3 Stars
0
2 Stars
0
1 Star
0
Sort by:
< Prev
1
2
3
Next >
Search filter:
Clear Filter
Your search term must have 3 or more characters.
Keep searches simple. Use keywords, e.g. "leaking", "pump", "broken" or "fit".
Sorry, we couldn't find any existing reviews that matched. Try using some different or simpler keywords.
★★★★★
★★★★★
Steven F - January 22, 2023
Verified Purchase
Quality, Service, and Delivery
The exact part I needed. Ready for shipment the next day. Received before the estimated time. Swap-out was a breeze. Range top works perfectly again.
★★★★★
★★★★★
Gaynel H - March 5, 2022
Verified Purchase
Best thing I did was buy the part and repair my stove without labor charge
I'm not mechanical at all, lucking my brother is a retired electrician. He told me where to look for the model number and encouraged me to look it up on PartSelect's website. I was easily able to figure out what part I needed, by reading the question-and-answer section. Located part and number on the diagram and ordered it. It was delivered quickly, and my brother had no problem installing it, took about 5 minutes. Best part saved me the cost of a new stove, labor and the up charge on part costs, not to mention the frustration of waiting for a repair man to show up.
★★★★★
★★★★★
Jack T - November 27, 2018
Verified Purchase
The Switch was the right one and eay to install. Verry good
I hade no trouble with repair very easy to install.
★★★★★
★★★★★
Debbie P - June 19, 2021
Verified Purchase
We are Back Up and Working!!!!
Called GE and they sent me a much more expensive part which did nothing to fix the problem. I was thinking about buying a new stove and this one is only a little over 2 years old! When you turned the burner on it went straight to high and wouldn't going to any other heat setting. PartSelect sent me this part to control the heating temperature and everything is up and running like it should. It's very easy to install. I received the part in a very timely manner and things are good here.
★★★★★
★★★★★
John H - August 9, 2024
Verified Purchase
Excellent OEM part
Reasonable price for the OEM part. Very easily installed.
The repair took less than 15 minutes.
★★★★★
★★★★★
Nancy B - November 18, 2024
Verified Purchase
Easy repair
The parts were in excellent condition and the repair was a success.
★★★★★
★★★★★
Kim B - December 22, 2024
Verified Purchase
Easy to change out
I am a58 year old woman and it was easy to replace with the help of YouTube I so glad I found parts select I tell every about it
★★★★★
★★★★★
TODD F - September 23, 2022
Verified Purchase
Worked Perfectly
Fast Shipping, item was a perfect match.
★★★★★
★★★★★
William T - November 16, 2022
Verified Purchase
Easy repair
Correct parts the first time, received in a timely manner.
★★★★★
★★★★★
Brisa V - April 24, 2018
Verified Purchase
Great place to buy parts
Great place to buy parts, it arrived on time
< Prev
1
2
3
Next >
Customer Repair Stories
Average Repair Rating: 4.3 / 5.0, 17 reviews.
What's this?
Sort by:
< Prev
1
2
Next >
Search filter:
Clear Filter
Your search term must have 3 or more characters.
Keep searches simple. Use keywords, e.g. "leaking", "pump", "broken" or "fit".
Sorry, we couldn't find any existing installation instruction that matched.
Left front dual burner only runs on highest heat
Pull oven away from the wall. Unplug from 220VAC outlet. Remove six (6) black screws from the upper back panel. Remove two (2) screws and washers from top of upper back panel. Rotate panel down and pull away from the back.
Remove burner control knob. Remove two (2) screws from burner control. Pull burner control backward throug
... Read moreh the open back. Disconnect upper and lower cable bundles.
Connect lower and upper cable bundles. Push control knob post through the front on the range. Install two (2) screws to hold the burner control. Install burner control knob and turn to the off position.
Reinstall upper back panel. Secure with two (2) silver screws with washers. Install six (6) black screws.
Plug in range 220VAC cable. Slide oven back into place.
Tested burner on high small burner, low small burner, high large burner, low large burner. All tested fine, burner cycled on/off cycles as expected.
Read less
Steve from SCITUATE, MA
Difficulty Level:
Really Easy
Total Repair Time:
30 - 60 mins
Tools:
Screw drivers
3 of 3 peoplefound this instruction helpful.
Was this instruction helpful to you?
Thank you for voting!
The double burner would not regulate, stuck on high
Unplug range, pull out to access back panel. Remove enough screws to access the burner switch. Remove knob, 2 screws hold the switch, remove them. You can now pull the switch out the back. It had 2 electrical plugs remove them. Install on new switch and put back together. The switch I got was exact replacement, thanks partselect
daniel from ANN ARBOR, MI
Difficulty Level:
Really Easy
Total Repair Time:
15 - 30 mins
Tools:
Nutdriver, Screw drivers
12 of 12 peoplefound this instruction helpful.
Was this instruction helpful to you?
Thank you for voting!
Burner would run on high at all settings
Remove cover on back remove two screws for switch and take picture of wire placement install new switch put all back together U. Plug stove first . Was really easy to do now have room do a other burner
Chris from ARANSAS PASS, TX
Difficulty Level:
Very Easy
Total Repair Time:
Less than 15 mins
Tools:
Socket set
5 of 5 peoplefound this instruction helpful.
Was this instruction helpful to you?
Thank you for voting!
One of the burners on my glass top range stopped working
After the volunteer experts at partselect told us which part we would likely need, once it came we found a diagram of the back of the stove and a video showing us how to do it. We turned off the circuit breaker, unscrewed the top of the back and replaced the part.
Brigid from JERSEY CITY, NJ
Difficulty Level:
Really Easy
Total Repair Time:
15 - 30 mins
Tools:
Screw drivers, Wrench set
4 of 4 peoplefound this instruction helpful.
Was this instruction helpful to you?
Thank you for voting!
Heating element always went high, even when controller was set low.
Unplug the range, remove the screws on the top third of the rear cover, remove two screws from the controller on the front side of the range, hold the rear cover open and pull the controller out of the back of the range, then unplug the two connectors from old controller. Plug the connectors into new controller, secure controller with scr
... Read moreews on the front of the range, replace the screws on the rear cover, plug the range in.
Read less
M from DOUGLAS, MA
Difficulty Level:
Easy
Total Repair Time:
15 - 30 mins
Tools:
Screw drivers, Socket set
7 of 7 peoplefound this instruction helpful.
Was this instruction helpful to you?
Thank you for voting!
Improper control of heating element
Disconnected power supply, removed control panel mounting screws with 1/4 inch nut driver, removed small phillips screws under control panel, pulled off control knob, then removed two phillips screws holding control switch to control panel. Verified replacement switch was identical to malfunctioning switch. Removed wires attached to old s
... Read morewitch, one at a time, and attached to new switch as each removed. Wires don’t appear to be labeled or color coded so be sure to relocate wires one at a time. Reassembly was reverse of disassembly.
Read less
John from WESTHAMPTON, MA
Difficulty Level:
Really Easy
Total Repair Time:
15 - 30 mins
Tools:
Nutdriver, Screw drivers
2 of 2 peoplefound this instruction helpful.
Was this instruction helpful to you?
Thank you for voting!
The right side Large/Small burner control failed.
The burner remained on high regardless of the position of the control. 1. Unplug the range. 2. From the back of the range control panel, remove the top-plate that covers the controls. (4 screws) 3. Remove the two screws that hold the control knob in place. 4. Move ONE WIRE AT A TIME from the old control knob to the new gripping the connec
... Read moretor only (do NOT pull the wire). 5. Remount the controller and reassemble the back cover with four screws. 6. reconnect the range and test.
Read less
JAMES from ORMOND BEACH, FL
Difficulty Level:
Really Easy
Total Repair Time:
30 - 60 mins
Tools:
Screw drivers
3 of 3 peoplefound this instruction helpful.
Was this instruction helpful to you?
Thank you for voting!
One burner would not go on low.
I looked everywhere for this part before I came upo9n this site. I found the part from their very well done website. Even had a picture so you could compare to what you have. It was an easy repair. I had been quoted over $200 to repair by a local repair place. Instead it was around $25 and 15 minutes to repair. This is the right site for
... Read moreany part you may need. I have a magnetic card they sent so in the future, if I need anything (and I will !) I can go right to the right place . Thanks also for a very prompt delivery.
Read less
Lee from POLSON, MT
Difficulty Level:
Really Easy
Total Repair Time:
15 - 30 mins
Tools:
Nutdriver, Screw drivers
5 of 5 peoplefound this instruction helpful.
Was this instruction helpful to you?
Thank you for voting!
Burner stayed on high even when set on low.
Replaced infinity switch: unplugged stove;. Removed upper back panel (4 small screws using socket wrench. Appropriate size box wrench would be fine, too); pulled off burner control dial. Removed 2 small screws with phillips screwdriver. From back of stove noted position of infinity switch . Replaced wires, 1 at a time, onto new switc
... Read moreh. Pushed new switch into same position as old switch. Secured with the previously removed screws. Replaced the control dial. Replaced upper back panel of stove.
Read less
Linda from RAPID CITY, SD
Difficulty Level:
Really Easy
Total Repair Time:
15 - 30 mins
Tools:
Screw drivers, Socket set
5 of 5 peoplefound this instruction helpful.
Was this instruction helpful to you?
Thank you for voting!
Only one Burner was heating
Disconnect plug from outlet from stove.Remove nob from control switch rem 2 small screws to release switch.Go to the back and proceed to rem back panel with 1/4 nut driver.Pull out switch and replace one lead a time.
David from RIVERVIEW, FL
Difficulty Level:
Really Easy
Total Repair Time:
15 - 30 mins
Tools:
Nutdriver, Screw drivers
1 personfound this instruction helpful.
Was this instruction helpful to you?
Thank you for voting!
< Prev
1
2
Next >
Questions and Answers
Ask our experts a question about this part and we'll get back to you as soon as possible!
14 questions answered by our experts.
Sort by:
< Prev
1
2
Next >
Search filter:
Clear Filter
Your search term must have 3 or more characters.
Keep searches simple. Use keywords, e.g. "leaking", "pump", "broken" or "fit".
Sorry, we couldn't find any existing answers that matched.Try using some different or simpler keywords, or submit your new question by using the "Ask a Question" button above!
Mary
February 4, 2019
Hi, would this be the right part to order if the front right burner only comes on high no matter where i set it?
For model number JB645RK2SS
Hello Mary, Thank you for contacting us. I suggest checking the following parts: PS11729102 SWITCH INFINITE CONTROL, and PS11729126 ELEMENT RADIANT 9' DUAL. Good luck with your repair!
21 people found this helpful.
Was this helpful?
Thank you for voting!
James
February 11, 2019
My front right large double burner only is working on high heat, is this ps11729102 all i need?
For model number JBG55EK1ES
Hi James, thank you for your question. There are a couple of parts that could cause this issue specifically. You will need a multi meter to be able to test the parts. The first part you will want to check is your radiant element. It should be reading between 0 - 120 ohms to be working correctly. The other part to check would be your infinite (or surface burner) switch. When you remove that part from the appliance, connect each probe from your multi meter to the prongs and then turn the switch to an on position. If you get no continuity then the switch is the issue. I hope that helps. Good luck with your repair.
10 people found this helpful.
Was this helpful?
Thank you for voting!
John
November 5, 2018
Is this the correct controller for both inner & outer coils of large left front burner?
For model number JB645DK3BB
Hi John, thank you for your question. Yes, this switch would control your larger burner wholly. So it would be able to activate the inner and outer coils. I hope that helps. Good luck with your repair.
4 people found this helpful.
Was this helpful?
Thank you for voting!
Jerry
January 7, 2020
My hot surface light indicator (part ps1018167) is staying on constantly.
For model number JB645DK3WW
Hello Jerry, Thank you for the question. This normally indicates the switch Part #: PS236754 for the small element or Part #: PS11729102 for the large will need to be replaced. The switch also controls the indicator light. We hope this helps!
The two front dual burners turn on high even when set at low. Will control switches PS11729102 do this and what would cause BOTH to fail? The burner(s)? The controller board? Where can I find a schematic?
For model number JB645RK1ss
Hi Tom, thank you for your inquiry. Based on the description that you have provided, the problem seems to be with the element switch and you may need to replace it, the part number is PS11729102. It turns the surface element on and off and controls how much heat the element produces. Occasionally, the surface element switch fails if the electrical contacts within the switch fuse together, resulting in continuous voltage flowing from the switch to the surface heating element. Another reason can be the control board also. We have attached the schematic diagram of the control panel parts to help you out. We hope this information is useful!
Hello. The 2 big burners of the stove overheat, the technician said that it is better to buy the hole set because the small one will do the same in the future. I don't know name of the parts. What would you recommend? I will appreciate. Thank you
For model number JB860SJ122
Hi Alicia,
Thank you for your question. The parts the technician are referring to are the surface elements. The part number listed under your model number for the 6 inch rear warming element is PS8754842. The part number listed for the 2 rear 5.5 inch elements is PS2370248. The part number listed for the left front element is PS11729126. The part number listed for the right front element is PS2321564. The elements are sold individually. If you would like to place an order for them, customer service is open 7 days a week and anyone will be happy to assist you. Please feel free to give us a call. We look forward to hearing from you!
My right front burner doesn't regulate, always on high. What part needs replacing?
For model number JB750DJ9BB
Hello Ion, thank you for your query. Your range may be facing this issue because the element control switch may be faulty. We would recommend checking the switch, part number PS11729102, to fix the issue. If this does not solve the problem, then you may have to replace the surface element, part number PS2321564. We hope this helps, good luck with this repair!
Is the correct switch for a dual burner large and small in one? Small only works on high. Large burner works fine.
For model number JB700DJ1WW
Hello Terry, thank you for your question. For the two small elements at the Rear left and right, the Infinite Switch is PS236754. The Dual ( Front Left ) Infinite switch is PS11729102. Good luck with your question.
double burner (front) not working good and making sparks from back the switch. also small front burner has problem. I guess I need to replace both switches. Are switches same for both or if i need 2 different type of switches? Tnx
For model number JBS60DK1WW
Hello Shawn, thank you for getting in touch. The control switches for both the elements are different. The control switch, part number PS11729102, controls the front large burner. The control switch, part number PS236754, controls the small front burner. We hope this information is useful!
Both of the front big burners overheat. Even when they’re on low. Is this the part I would need for BOTH front big burners?
Thank you
For model number JB655EK3ES
Hi Zendy, thank you for reaching out. Yes, the issue is most probably with the infinite control switch, part number PS11729102. It is for both the front burners, but it is sold individually. It turns the surface element on and off and controls how much heat the element produces. We would recommend replacing it to fix the issue. We hope that helps!
Was this helpful?
Thank you for voting!
< Prev
1
2
Next >
✖
Ask a Question
Ask our experts a question on this part and we'll respond as soon as we can.
