Washing Machine Upper Agitator W10836692

Hello Paola, Thank you for the question. Yes, the agitator and base are separate. Hope this helps!

Hello Roberta, Thank you for contacting us. I have researched the model you have provided and have found the part you are looking for is PartSelect Number PS11727882 for the Washing Machine Upper Agitator and PartSelect Number PS10067065 for the Bolt. The PartSelect Number PS12349205 Dispenser can be reused if not damaged. Hope this helps!

Hi Debbie, thank you for your follow up. I have linked that part down below for you. I hope that helps. Good luck with your repair.

Hi Nathalie, thank you for your question. I have linked the two parts that make up your agitator below. Good luck with your repair.

Hello Robert, thank you for writing. There is only one Bolt for the Agitator on your model. Agitator Bolt part number PS11748116. Good luck with your repair!

Hello Debbie, thank you for writing. The Fabric Softener Dispenser is sold separate. We will need the model number for your washer to locate the correct replacement. We look forward to hearing back from you.

Hello Todd, thank you for contacting us, In order for us to locate the correct parts and repair information we will require the model number of the unit. Once you have located the model number please feel free to resubmit the question and we will be happy to help you. Look forward to hearing from you!

Hello Jack, thank you for your question. The agitator bolt is Agitator Bolt Part #: PS11748116. Unfortunately, we do not have the specifications of the bolt. Various makes and models differ in how the agitator is removed. In some newer models, the agitator just lifts straight up and out. However, in most models you will have to do some combination of the following steps. First remove the fabric softener dispenser, if any. It should either lift or screw off. Next remove the cap. It may lift off, screw off or failing that, it may need to be pried off. Beneath the cap some agitators are secured in place by a bolt. Use a socket wrench with an extension to remove that bolt. Some Maytag's may have a screw near to the bottom of the agitator post that must be removed. Now try to lift the agitator straight up, possibly with a little back and forth rocking motion. Use caution when pulling, the agitator may come loose suddenly and hit you in the face or send you flying backward. If you need help placing an order, customer service is open 7 days a week. Please feel free to give us a call. We look forward to hearing from you.

Hello Barbara, Thank you for contacting us. We have researched the model you have provided and have found the part you are looking for is Fix Number: FIX11770078 for the Washplate base and Fix Number: FIX11727882 for the Upper Agitator. If you need help placing an order, customer service is open 7 days a week. Please feel free to give us a call. We look forward to hearing from you!

Hello Karen, Thank you for the question. You will need to use a flat head screw driver to pop off the cap on the top of the agitator. Once removed you will need a 7/16 Socket to remove the bolt from the agitator. Once the bolt is removed, just pull the Upper Agitator up and off. We hope this helps!