The tub seal is manufactured to create a watertight seal between the tub and the inner spin basket. Your seal will wear over time causing the rubber to dry out and crack, breaking the seal in your washer. You may need to replace this part if you notice leaking in your appliance. This part is about 2.75 inches in diameter, is made of rubber, and is black in color.
How Buying OEM Parts Can Save You Time and Money
Troubleshooting
This part fixes the following symptoms:
Leaking
This part works with the following products:
Washer Dryer Combo, Washer, Dryer.
This part works with the following products:
General Electric, Kenmore.
Part# WH08X24594 replaces these:
AP5986402, WH08X10063
Customer Reviews
Average Rating:
★★★★★
★★★★★
2 Reviews
5.0
Filter By Rating:
5 Stars
2
4 Stars
0
3 Stars
0
2 Stars
0
1 Star
0
Sort by:
< Prev
1
Next >
Search filter:
Clear Filter
Your search term must have 3 or more characters.
Keep searches simple. Use keywords, e.g. "leaking", "pump", "broken" or "fit".
Sorry, we couldn't find any existing reviews that matched. Try using some different or simpler keywords.
★★★★★
★★★★★
Spencer C - April 5, 2019
Verified Purchase
washer main seal & stabilizer replacement
for the most part strait forward job, replace seal & main bearing together to reduce noise. fast shipping & easy to navigate parts inventory 2 thumbs up
★★★★★
★★★★★
Pamela L - November 7, 2018
Verified Purchase
washermachine parts
Parts I ordered were just what we needed. Shipping was fast and no
problems. Ordering was easy and would order on this website again.
A satisfied customer
< Prev
1
Next >
Questions and Answers
Ask our experts a question about this part and we'll get back to you as soon as possible!
9 questions answered by our experts.
Sort by:
< Prev
1
Next >
Search filter:
Clear Filter
Your search term must have 3 or more characters.
Keep searches simple. Use keywords, e.g. "leaking", "pump", "broken" or "fit".
Sorry, we couldn't find any existing answers that matched.Try using some different or simpler keywords, or submit your new question by using the "Ask a Question" button above!
Angelica
March 6, 2019
My washer/dryer combo is leaking. Repairman looked at it and said the main bearing is rusted. Someone else said the main bearing affects the tub and i'd need a new tub installed. Is this True and what part would i purchase? Is it a difficult fix? Thank you.
For model number GTUP270EM1WW
Hello Angelica, thank you for your question. The bearing is part of the outer tub itself so you would have to replace the PartSelect Number PS10055836. Its not a difficult repair, but time consuming. It is also recommended you replace the tub seal PartSelect Number: PS11726907. The tub seal is manufactured to create a watertight seal between the tub and the inner spin basket. Your seal will wear over time causing the rubber to dry out and crack, breaking the seal in your washer. I hope this helps!
6 people found this helpful.
Was this helpful?
Thank you for voting!
Chi
February 13, 2020
Hi do you have the video or any images to show me how to replaced the tub seal. Thank you.
For model number GTUP240EM6WW
Hi Chi, thank you for your inquiry. We do not have an exact video for your model, but we do have an installation video on how to replace a tub seal. Here you are: https://youtu.be/rwhgUmZ15eY. Good luck with your repair.
1 person found this helpful.
Was this helpful?
Thank you for voting!
Daniel
November 23, 2022
Hi, I have the GTUN275EM2WW and I noticed a have leak coming from Part# WH13X27314 on the cold water side. Would replacing the whole valve fix my problem?
Hello Daniel, thank you for reaching out. If the leak is coming from the water inlet valve, it indicates that it is damaged and needs to be replaced. The part number for the water inlet valve is PS12343369. If you require assistance to place an order, please contact customer service. We hope that helps!
How do I install the seal under the inner tub? Do you have video that shows how to change the seal on this washer?
For model number GTUN275GM1WW
Hi Dwayne,
Thank you for your inquiry. We do not have an exact video for your model, but we do have an installation video on how to replace a tub seal. Here you are: https://youtu.be/rwhgUmZ15eY . I hope that helps. Good luck.
1 person found this helpful.
Was this helpful?
Thank you for voting!
Wago
September 23, 2017
Will this tub seal be the right item i need to replace> part 304 looks right in diagram. However i want to be sure that this model (combo unit ) model gtup270gm1ww serial az012871c is comparable... thx
For model number model gtup270gm1ww serial az012871c
Hello Wago, thank you for contacting us. This is the correct tub seal for the model number provided. Good luck with the repair!
1 person found this helpful.
Was this helpful?
Thank you for voting!
Youngsook
September 29, 2017
How can I take out the inner tub from the washer?
For model number GTUP270EM1WW
Hello Youngsook, Thank you for the question.To remove the inner tub, First remove the cover assembly. Next remove the agitator. You will then need to disconnect 4 dampening straps from the tub cover.Next lift the inner tub and pull each front suspension rod out of the slot.Hope this helps!
1 person found this helpful.
Was this helpful?
Thank you for voting!
Cordale
August 7, 2018
My washer makes a roaring noise while spinning and leaks while washing (agitating). Is it just the tub seal or do i need another part? Model number is gtup270em3ww. Thanks
For model number gtup270em3ww
Hello Cordale, thank you for your question. The tub seal should fix the leaking issue you're having, but i would suggest replacing the following two parts, as they can cause that loud noise when in the spin cycles. The parts are as follows: WASHER HUB Part Number: PS3501415 Hub Nut Part Number: PS3501416. Good luck with your repair!
1 person found this helpful.
Was this helpful?
Thank you for voting!
Dennis
February 2, 2023
What’s the correct tub seal and bearing #’s Thanks
For model number 2661532210
Hello Dennis, Thank you for contacting us. We have researched the model you have provided and have found the part you are looking for is PartSelect #: PS11726907 for the Tub Seal. The Bearing is only sold as part of the Outer Tub Assembly. We hope this helps!
My GE washer dryer combo was leaking so I purchased the tub seal. After some difficulty I got the tub nut off but the basket will not separate from the tub assembly. the shaft/inside of the basket looks a bit different from what i've seen on videos and I wonder if I am missing something. I could really use some help!
For model number GTUP270EM4WW
Hi Jason, thank you for reaching out. According to our research, before pulling up the basket check that you have removed the suspension straps of the basket. Use the 5/16th nut driver to remove the screws. Then, remove the basket cover and pull the basket out. Good luck with your repair!
Was this helpful?
Thank you for voting!
< Prev
1
Next >
✖
Ask a Question
Ask our experts a question on this part and we'll respond as soon as we can.
