The idler pulley wheel is now sold with this arm. This idler pulley is for dryers.
Idler pulley maintains correct tension on the drive belt to spin the drum.
How Buying OEM Parts Can Save You Time and Money
Part Videos
Replacing your Whirlpool Dryer Idler Pulley with Bracket
Keep searches simple. Use keywords, e.g. "leaking", "pump", "broken" or "fit".
Sorry, we couldn't find any existing reviews that matched. Try using some different or simpler keywords.
★★★★★
★★★★★
Michael W - March 2, 2024
Verified Purchase
Easy Repair, Great Part.
The part was in good condition. Part was shipped fast. Dryer is back together and working.
★★★★★
★★★★★
Keith D - December 15, 2023
Verified Purchase
EASY REPAIR-PART FITS AS THE ORIGIONAL
SAME PRICE AS THE PULLY ALONE
★★★★★
★★★★★
Bob P - November 23, 2023
Verified Purchase
Easy to install
It took care of the noise from the dryer.
★★★★★
★★★★★
Ronald L - August 30, 2023
Verified Purchase
Dryer repair
My dryer was squealing, removed the back of the dryer found that the tension pulley was not working properly, purchased the replacement part and works like new again.
★★★★★
★★★★★
Mary C - July 25, 2023
Verified Purchase
Worked as expected.
All went very well installing the part. Dryer is working great!
★★★★★
★★★★★
David6011 C - July 7, 2023
Verified Purchase
EZ
EZ install, fit perfect
★★★★★
★★★★★
John L - April 27, 2023
Verified Purchase
Idler pulley and belt replacement
The part was correct and the video to install it was very useful
★★★★★
★★★★★
Peter H - April 20, 2023
Verified Purchase
Fixed the problem
Part was purchased to fix an annoying squeal. Stopped the noise, and was easy to install
★★★★★
★★★★★
Christopher R - April 6, 2022
Verified Purchase
Right solution for squeaky dryer.
Part came fast. Do it yourself repair, just watch how it’s done on YouTube.
★★★★★
★★★★★
Paul S - March 16, 2022
Verified Purchase
Screeching dryer
The idler pulley with bracket was an exact fit and has worked flawlessly.
Good delivery and good price.
Excellent!
< Prev
1
2
3
Next >
Customer Repair Stories
Average Repair Rating: 3.7 / 5.0, 15 reviews.
What's this?
Sort by:
< Prev
1
2
Next >
Search filter:
Clear Filter
Your search term must have 3 or more characters.
Keep searches simple. Use keywords, e.g. "leaking", "pump", "broken" or "fit".
Sorry, we couldn't find any existing installation instruction that matched.
Dryer was Noisy
I simply followed the video and apart from a couple of areas that were not relevant to my model, everything went exactly as illustrated. The video is excellent and made the repair so easy.
The only issue I experienced was being short two rollers, as the parts diagram did not clearly show that there were two rollers in the back
... Read moreand two in the front.
A kit, with its own part number should be prepared that would show 4 rollers and belt as the recommended required parts.
It was an easy fix, I just did half the install a second time.
Please do not buy parts from Parts Select. My order was not shipped the next day (as advertised on the web site), but instead 3 days later. I paid an extra couple of dollars for expedited shipping, which did made no difference (except for a couple of extra dollars for Parts Select to pocket).
When I emailed customer service
... Read more to complain, I never received any response. I can't believe that customer service can be so unimportant in such a competitive marketplace. And with the power of social media, you would think customer service would be a big differentiator.
I ended having to buy another part (the igniter). I found a different vendor with better prices and a commitment to satisfying customers. I got my part in 3 days for cheaper shipping than the starting point of Parts Select shipping. So I guess I should thank Parts Select for forcing me to look elsewhere because I found a better place with better prices and better shipping and better customer service!
The pulley is accessible from the back of the dryer. Disconnect the gas line. Remove all the screws. Also remove the small plate that secures the line cord. Lift the back up and out. I was able to avoid disconnecting the water line. Take a picture of the pulley so that you will have a record of the belt routing. Release the spring and rem
... Read moreove and replace the pulley and bracket. Vacuum out the lint. Plug in the dryer to make sure that it works properly before reassembly.
Read less
John from CREST HILL, IL
Difficulty Level:
Easy
Total Repair Time:
30 - 60 mins
Tools:
Nutdriver, Pliers
2 of 2 peoplefound this instruction helpful.
Was this instruction helpful to you?
Thank you for voting!
Loud squeal noise when dryer running
I took off the back panel off the dryer. The idler pulley could be accessed on the bottom. It was a bit cramped but not too tough to replace.
Joseph from Canonsburg, PA
Difficulty Level:
A Bit Difficult
Total Repair Time:
30 - 60 mins
Tools:
Screw drivers, Socket set
1 personfound this instruction helpful.
Was this instruction helpful to you?
Thank you for voting!
Loud squeaky sound at start up
Pulled the back panel off with nut driver , reached in removed belt from pulley , disconnected the spring , removed the the 1 bolt holding the bracket . Put the new one in , in reverse order . Very simple , maybe 15 minutes total . While back is off , shop vac out any lint !!
DANIEL from FOND DU LAC, WI
Difficulty Level:
Very Easy
Total Repair Time:
Less than 15 mins
Tools:
Nutdriver, Socket set
1 personfound this instruction helpful.
Was this instruction helpful to you?
Thank you for voting!
Pulley wheel worn out spring was broken
Pulled the old bracket and put the new one in less that 30 minutes
I removed the bottom access panel, with 2 hands i reached in behind the blower, i released the belt, i used a screwdriver to pop the retainer from the pully spindle, i removed and replaced the pully, i snapped the retainer back on and replaced the belt. I made sure the belt was on track and all was good. I put the bottom panel back on, it
... Read more took all of 5 minutes. The hardest part was the retainer clip faces the rear of the dryer so you have to feel it. Also , the space is tight, use a smaller flathead screwdriver to get behind the clip, it will pop right off.
Read less
Anthony from SAINT CLOUD, FL
Difficulty Level:
Really Easy
Total Repair Time:
Less than 15 mins
Tools:
Screw drivers
4 of 5 peoplefound this instruction helpful.
Was this instruction helpful to you?
Thank you for voting!
Dryer was very loud and sounded like it was scraping
Took the back and top off of my front loader. I had checked on you tube for the problem and how to fix it and ordered the part. Just followed the directions on how to remove the old idle pulley and installing the new one. Dryer runs like new!
Annde from JEFFERSON CTY, TN
Difficulty Level:
Really Easy
Total Repair Time:
15 - 30 mins
Tools:
Pliers, Screw drivers, Wrench (Adjustable)
3 of 3 peoplefound this instruction helpful.
Was this instruction helpful to you?
Thank you for voting!
Dryer starts with loud squeak initially. Eventually there was a loud clank and dryer stopped.
Rather than remove the front panels, door, control panel and drum, I noticed 1/4" metal screws on the back panel. There were approximately 6 holding the back panel in place. I did have to remove the top panel as well before removing the back. Once removed I had complete access to the broken idler pulley assembly. I immediately saw the b
... Read moreroken pulley. I installed the new one with very little effort. Reset the belt according to instructions from the video. Reassembled, plugged in, hit start and enjoyed the sweet sounds of success. All told it took me about 20 minutes from start to finish.
Take pictures along the way. 1. Remove lower front panel using screwdriver to lift up on tabs on top of panel. 2. remove door 3. unplug moisture sensor plugs 4. remove lint trap 5. on back of dryer, remove screws holding upper lid 6. slid up lid forward just a small amount, its hooked in towards the front of
... Read morethe upper lid. you will need to do this so you can can remove two screws under the lid holding the front panel of the dryer on 7. remove the front panel screws mentioned in step 6. 8. Remove lower front panel screws 9. remove front panel 10. reach into dryer at the bottom and release tension from belt pulley, sliding the belt off. (make a note of how the belt is routed around the drive and idler pulleys) 11. slide out tumbling drum 12. with drum removed, use socket wrench and socket to remove old idler pulley. 13. install new idler pulley 14. reinstall tumbling drum 15. slide belt back around tumbling drum, looping belt around drive pulley and around idler pulley. 16. When belt is installed, rotate drum a few revolutions to ensure belt rides correctly. 17. Reinstall front panel 18 slide top panel back into place and secure with screws from back 19. reinstall door 20. reattach moisture sensor plugs 21. reinstall lower panel
Ask our experts a question about this part and we'll get back to you as soon as possible!
2 questions answered by our experts.
Sort by:
< Prev
1
Next >
Search filter:
Clear Filter
Your search term must have 3 or more characters.
Keep searches simple. Use keywords, e.g. "leaking", "pump", "broken" or "fit".
Sorry, we couldn't find any existing answers that matched.Try using some different or simpler keywords, or submit your new question by using the "Ask a Question" button above!
Dan
February 18, 2023
My dryer wouldn't or would barely tumble. I took the back panel off and had a look at the motor and belts ect. With the dryer on, I could hear the motor running, but nothing was moving/spinning. I pulled the tension arm, increasing the tension, and when I released it, everything started working as it should... for about a week. Took it apart again and the same deal. What's worn out? What parts do I need?
For model number Wed94hexw1
Hello Dan, thank you for your inquiry. Based on the information provided, we recommend replacing several items that can be found in the Dryer Repair Kit PS373088. This dryer repair kit contains a multi rib dryer belt, 4 drum support rollers, 1 idler assembly, 9 tri rings, and 1 washer. We also have a video for your view for installation information. We hope to hear from you soon.
As a temporary fix, will wd40 stop a squealing idler?
For model number Ymede250xl0
Hi Larry, thank you for the great question. WD-40 only protects metal from rust and corrosion, penetrates stuck parts, displaces moisture, and lubricates almost anything, so it may provide a temporary solution. For squealing sounds, it is advised to look for any wear on the idler pulley. If you come across scoring marks, then it is one of the signs of a bad idler pulley. We recommend you replace the idler pulley, part number PS334244, since a worn-out idler pulley may damage the drive belt if used for longer durations. We hope this information helps!
