Whirlpool/Whirlpool_Thumb/W1FWVXJF.gif
See part 41 in the diagram
( Grid squares measure 1x1 inch )

Get in touch, we're here to help!

Open until 10PM EST

customerservice@partselect.com

Dryer Lint Filter and Cover

★★★★★
★★★★★
27 Reviews
$ 46.17   In Stock

Get this part fast. Average delivery time via standard shipping: 1.8 days.

PartSelect Number PS11726200
Manufacturer Part Number W10828351
Manufactured by Whirlpool
Product Description

Dryer Lint Filter and Cover Specifications

Cover and filter as an assembly. It is used in dryer, If the lint filter cover is damaged or cracked, it should be replaced.

How Buying OEM Parts Can Save You Time and Money

Troubleshooting
This part fixes the following symptoms:
Takes too long to dry | No heat or not enough heat | Noisy
This part works with the following products:
Dryer, Washer Dryer Combo.
This part works with the following products:
Kenmore, Whirlpool, KitchenAid, Roper.
Part# W10828351 replaces these:
AP5985829, 348399, 348400, 685273, 8531964, 8531967, W10812395, W10828351VP
Questions and Answers

We're sorry, but our Q&A experts are temporarily unavailable.
Please check back later if you still haven't found the answer you need.

8 questions answered by our experts.
    Sort by:
    Sorry, we couldn't find any existing answers that matched.Try using some different or simpler keywords, or submit your new question by using the "Ask a Question" button above!
    Daniel
    August 26, 2017
    Why does the lint filter cover keep falling out of the hole? I've tried bending the four clips so that it stays in the vent hole, but then the filter flops around. I also tried bending two clips to hold the filter, and two to hold the filter/cover assembly in the vent hole, but that did not work. Thanks, dan
    For model number 11088419800
    Hello Daniel, thank you for contacting us. According to the how to video on our site, the clips should be tight and have no play at all, over time heat could of caused it to warp and you may need to replace the lint filter and cover. Hope this helps!

    10 people found this helpful.

    Was this helpful?
    Thank you for voting!
    Judith
    June 26, 2019
    My dryer is older and i need a new lint filter that is oval and fits in the hole in the back of the dryer. I have numbers lea4930xkno=serial number m20410081-stock number lea493k. Please e-mail if i can order this
    Hello Judith, thank you for your question! The lint filter for this unit is PartSelect Number: PS11726200. Please enter the part number into the site for current price and availability. Good luck with your repair!

    3 people found this helpful.

    Was this helpful?
    Thank you for voting!
    Beverley
    November 26, 2017
    I am trying to replace the lint filter p/n 8531984
    For model number 11084722401
    Hello Beverley,Thank you for contacting us. I have researched the model you have provided and have found the part you’re looking for is Part Number: PS11726200. Good luck with the repair!

    Was this helpful?
    Thank you for voting!
    Judy
    December 12, 2018
    Lint escapes from this filter and builds up behind the wire screen on the back side of the dryer. Suction from a vacuum cleaner is not strong enough to remove it from this area. I do not see any way to remove the screen so that this lint can be removed. How can the lint buildup be removed??
    For model number LTE5243DQ4
    Hello Judy, Thank you for the question. You will need to remove the back panel on the appliance and remove the Air ducks to access the screen. Hope this helps, good luck with this repair!

    Was this helpful?
    Thank you for voting!
    GIANNI PESENTI
    March 13, 2019
    Hello i have to replace the filter and its cover ( which p/n is 8531967) of the dryer. I found how to order the filter but i am not sure it this comes with the cover as well. If not, how can i order the cover as well?Thanks
    For model number Whirlpool mod. LTE5243DQB
    Hello Gianni, thank you for contacting us. Part PS11726200 is the Lint Filter and the Cover for it. They are compatible to your model.

    Was this helpful?
    Thank you for voting!
    William
    March 27, 2019
    What is the lint filter and cover I need to order for this model dryer?
    For model number LTG5243DQ9
    Hello William, thank you for your question. Lint Filter and Cover part PS11726200 is correct for your model.

    Was this helpful?
    Thank you for voting!
    Melodie
    May 23, 2019
    We need a dryer lint trap assembly kit. The clips/springs that the lint trap adhere to are broken/missing. It is a washer/dryer combo that is 20 plus years old. When plugged in the model number it did not come up.
    For model number YLTE5243DQ1
    Hello Melodie, thank you for your question. This is the compatible filter for your unit, PartSelect Number: PS11726200. I was able to find your model in another source. I hope this helps!

    Was this helpful?
    Thank you for voting!
    Sian
    June 18, 2019
    Hello! My Whirlpool dryer is telling me that the lint screen part number is 691471, would this be equivalent to the above lint screen? Thanking you in advance, siân.
    For model number Ldr3822hq1
    Hello Sian, thank you for writing. This Lint Filter and Cover is the replacement part for your model.

    Was this helpful?
    Thank you for voting!
      Part Videos

      Replacing your Kenmore Dryer Dryer Lint Filter and Cover

      Customer Repair Stories
       Average Repair Rating: 4.5 / 5.0, 14 reviews. What's this?
      Sort by:
      Sorry, we couldn't find any existing installation instruction that matched.
      lint filter screen was broken
      replace lint filter with new part. Great service and quick delivery! Thanks!
      • Kevin from Seattle, WA
      • Difficulty Level:
        Really Easy
      • Total Repair Time:
        Less than 15 mins
      • Tools:
      • Parts Used:
        W10828351
      59 of 67 people found this instruction helpful.
      Was this instruction helpful to you?
      Thank you for voting!
      In the middle of changing loads there was snapping and sound and drum stopped turning.
      I was hopeful it was the belt. But, I had no idea how to get to it. I used the model no. and looked on line for pats and schematics. That gave me a sense of what to do. I started at the rear and removed the back panel. It was like peeling an onion because then, I wasn't sure what to remove next. So I just kept removing nut head screws until eventually I had loosened the sides, removed the top and discovered the front lifted up and off (no screwed attachment.) There's grounding wire that must be detached. Don't forget to re-attach. Without proper grounding you could be electocuted! I was careful to remember how it was attached. To get to the pulley, which is on the front, I had to remove the drum. I found the snapped belt. The pulley is held in place by tension from the belt so, once the belt goes the pulley detaches. I tried to find the belt locally the following week but was unsuccessful. I found the part on-line and had it in four days. It was tricky getting the belt and pulley in place. I persevered.
      The parts ( I replaced the fliter that needed replacement for years too) came with installation instructions. Its possible I did not have to disassemble as much as I did. Oh well! Although I'm fairly mechanical, I'm still pretty proud to have been able to do it and save the cost of a repairman.
      • William from Glen Burnie, MD
      • Difficulty Level:
        A Bit Difficult
      • Total Repair Time:
        1- 2 hours
      • Tools:
        Socket set
      • Parts Used:
        W10828351, 3394652
      17 of 24 people found this instruction helpful.
      Was this instruction helpful to you?
      Thank you for voting!
      lint coming out duct outside
      one of ears that holds filter was broken leaving a small gap so lint went into duct work so i replaced the cover and filter is now held in place letting the filter do its job trapping the lint
      • john from hamlet, NC
      • Difficulty Level:
        Really Easy
      • Total Repair Time:
        Less than 15 mins
      • Tools:
      • Parts Used:
        W10828351
      14 of 20 people found this instruction helpful.
      Was this instruction helpful to you?
      Thank you for voting!
      Belt broke & renter tried to fix without my knowledge
      When the belt broke my renter tried to fix it with duct tape and in the process the idler pulley either broke or somehow got lost. When I began to fix the dryer with a new belt,I discovered the idler was gone. SO, not knowing what it looked like was a problem. Going to the PartSelect web site I was able to see the exploded views of the whole dryer and pick out the right repair items. Really worked slick. Thanks. Allan W. Rutter
      • ALLAN W from CYRUS, MN
      • Difficulty Level:
        Easy
      • Total Repair Time:
        30 - 60 mins
      • Tools:
        Nutdriver
      • Parts Used:
        W10828351, WP691366
      7 of 7 people found this instruction helpful.
      Was this instruction helpful to you?
      Thank you for voting!
      lint filter an cover was stolen by tenant
      easy three prong push-in,...
      • Michael from WEST WARWICK, RI
      • Difficulty Level:
        Really Easy
      • Total Repair Time:
        Less than 15 mins
      • Tools:
      • Parts Used:
        W10828351
      4 of 5 people found this instruction helpful.
      Was this instruction helpful to you?
      Thank you for voting!
      lod and heat caused cracks
      replace basket with new one snapped in
      • Lawrence from Hull, MA
      • Difficulty Level:
        Really Easy
      • Total Repair Time:
        Less than 15 mins
      • Tools:
      • Parts Used:
        W10828351
      4 of 5 people found this instruction helpful.
      Was this instruction helpful to you?
      Thank you for voting!
      Old lent trap replaced with new...
      Popped out the old lent trap & popped in the new one..and walla perfect repair..
      • Michael from MORGANTOWN, WV
      • Difficulty Level:
        Easy
      • Total Repair Time:
        Less than 15 mins
      • Tools:
      • Parts Used:
        W10828351
      2 of 2 people found this instruction helpful.
      Was this instruction helpful to you?
      Thank you for voting!
      Old filter and cover had rusted retaining clips and rusted out sections
      Removed old assemblies manually and replaced with new. Very easy and the parts fit perfectly!
      • david from HAYWARD, CA
      • Difficulty Level:
        Very Easy
      • Total Repair Time:
        Less than 15 mins
      • Tools:
      • Parts Used:
        W10828351
      2 of 2 people found this instruction helpful.
      Was this instruction helpful to you?
      Thank you for voting!
      original lint filter frame broke in several places
      Simply put it in the exhaust hole.
      • Jane from Buckeye, NV
      • Difficulty Level:
        Really Easy
      • Total Repair Time:
        Less than 15 mins
      • Tools:
      • Parts Used:
        W10828351
      2 of 5 people found this instruction helpful.
      Was this instruction helpful to you?
      Thank you for voting!
      Was too old
      I just changed for the new one! 2 seconds.
      • HELOISA from BOCA RATON, FL
      • Difficulty Level:
        Really Easy
      • Total Repair Time:
        Less than 15 mins
      • Tools:
      • Parts Used:
        W10828351
      2 of 6 people found this instruction helpful.
      Was this instruction helpful to you?
      Thank you for voting!
      Customer Reviews
      Average Rating:
      ★★★★★
      ★★★★★
      27 Reviews
      5.0
      Filter By Rating:
      • 5 Stars
        26
      • 4 Stars
        1
      • 3 Stars
        0
      • 2 Stars
        0
      • 1 Star
        0
      Sort by:
      Sorry, we couldn't find any existing reviews that matched. Try using some different or simpler keywords.
      Model Cross Reference
      This part works with the following models:
      PartSelect Number: PS11726200
      Manufacturer Part Number: W10828351
      Brand
      Model Number
      Description
      Kenmore
      10688419100
      Dryer
      Kenmore
      10688419300
      Dryer
      Kenmore
      110088732791
      Washer Dryer Combo
      Kenmore
      1101820299
      Washer Dryer Combo - WASHER DRYER LAUNDRY SYSTEM
      Kenmore
      11078411100
      Dryer
      Kenmore
      11078411110
      Dryer
      Kenmore
      11078411200
      Dryer
      Kenmore
      11078411210
      Dryer
      Kenmore
      11078411400
      Dryer
      Kenmore
      11078411410
      Dryer
      Kenmore
      11078411600
      Dryer
      Kenmore
      11078411610
      Dryer
      Kenmore
      11078412100
      Dryer
      Kenmore
      11078412200
      Dryer
      Kenmore
      11078412400
      Dryer
      Kenmore
      11078412600
      Dryer
      Kenmore
      11078413100
      Dryer
      Kenmore
      11078413200
      Dryer
      Kenmore
      11078413400
      Dryer
      Kenmore
      11078413600
      Dryer
      Kenmore
      11078413800
      Dryer
      Kenmore
      11078414100
      Dryer
      Kenmore
      11078414200
      Dryer
      Kenmore
      11078414400
      Dryer
      Kenmore
      11078414600
      Dryer
      Kenmore
      11078414800
      Dryer
      Kenmore
      11078415100
      Dryer
      Kenmore
      11078415110
      Dryer
      Kenmore
      11078415120
      Dryer
      Kenmore
      11078415200
      Dryer

      Get in touch, we're here to help!

      Open until 10PM EST

      Contact Customer Service