Dishrack Rollers and Axles - Kit of 8 Specifications
If you are having trouble rolling your dish rack in and out, there could be an issue with the rollers or axles. Check the existing rollers and axles for any visible physical damage. Replace the parts if the rollers or their axles are damaged. These rollers attach to the dish rack allowing the rack to roll in and out with ease. This pack includes 8 gray rollers measuring at approximately 1.75 inches L x 0.75 inches W x 1.75 inches H. Each roller comes with an axle.
How Buying OEM Parts Can Save You Time and Money
Troubleshooting
This part fixes the following symptoms:
Not cleaning dishes properly | Noisy | Door won’t close | Door latch failure
Keep searches simple. Use keywords, e.g. "leaking", "pump", "broken" or "fit".
Sorry, we couldn't find any existing reviews that matched. Try using some different or simpler keywords.
★★★★★
★★★★★
Todd E - December 14, 2023
Verified Purchase
Great parts, very easy to install
Replaced all wheels. Old ones dried out and a couple were broken. News ones are perfect. Easy to install
★★★★★
★★★★★
Ruth D - November 10, 2023
Verified Purchase
Dishwasher rack roller works fine
The part worked great. My only concern is the part I was replacing was two rollers held together by a separate part which was not even listed as an avalarte so I worried this single roller might not work. Just a note in the description would have helped. But I’m completely satisfied with the part and the fast delivery.
★★★★★
★★★★★
Catherine J - September 7, 2023
Verified Purchase
Dishwasher parts
We received our order very quickly and the parts fit perfectly
★★★★★
★★★★★
Joseph F - May 10, 2023
Verified Purchase
Perfect fit
The part came before promised and was easy to install. Very satisfied.
★★★★★
★★★★★
John S - November 3, 2022
Verified Purchase
Replacing Dishwasher Rollers
Parts received very quickly. Rollers were well made and attached very easily.
★★★★★
★★★★★
George K - September 24, 2022
Verified Purchase
Perfect
Fit perfect
★★★★★
★★★★★
NABIL M - August 20, 2022
Verified Purchase
Dish rack rollers
Exactly what I needed to fix the dish rack
★★★★★
★★★★★
Dennis D - July 29, 2022
Verified Purchase
Worked perfect.
Upgraded design works much better than original design.
★★★★★
★★★★★
Steven D F - April 3, 2022
Verified Purchase
A big improvement over the original design.
Better than expected. Installed easily, within minutes, & will very likely outlast the lifetime of the dishwasher on which they were installed.
★★★★★
★★★★★
Dawn Y - March 5, 2022
Verified Purchase
Easy to install new dish rack rollers
Part was perfect and works exactly as I hoped!
< Prev
1
2
3
Next >
Customer Repair Stories
Average Repair Rating: 4.8 / 5.0, 182 reviews.
What's this?
Sort by:
< Prev
1
2
3
Next >
Search filter:
Clear Filter
Your search term must have 3 or more characters.
Keep searches simple. Use keywords, e.g. "leaking", "pump", "broken" or "fit".
Sorry, we couldn't find any existing installation instruction that matched.
Wheels on lower rack failed
Install the axel in wheel then push onto rack
Wayne from DUMFRIES, VA
Difficulty Level:
Really Easy
Total Repair Time:
Less than 15 mins
6 of 10 peoplefound this instruction helpful.
Was this instruction helpful to you?
Thank you for voting!
Wheels and axles on bottom dishwasher rack broke.
Put them on and snapped them in. No problem!!!!
Joan from FREEPORT, ME
Difficulty Level:
Really Easy
Total Repair Time:
Less than 15 mins
6 of 10 peoplefound this instruction helpful.
Was this instruction helpful to you?
Thank you for voting!
one old roller broke
pulled off all old rollers and axiies and snapped on new ones
Barry from FISHKILL, NY
Difficulty Level:
Really Easy
Total Repair Time:
Less than 15 mins
5 of 9 peoplefound this instruction helpful.
Was this instruction helpful to you?
Thank you for voting!
Wheels kept coming off
Wheels and axles come separately and no instructions were included. After a few minutes of looking at the parts, I realized you have to put the axles on the wheels and then snap it on the dish rack. Once I did the first one, the others were easy. Made my dishwasher feel like it was new. Obviously the design of the original wheels was faul
... Read morety as these were a different design.
The lower dishrack connectors on the original roller axle parts had loosened so the rollers kept falling off
1. assemble each of the new rollers and axles by inserting the axle through the roller from the back side; push until the two parts snap together; 2. remove the cutlery basket, take the lower dishrack out of the dishwasher and turn it upside
... Read moredown; 3. remove the old rollers from the dishrack and send them for recycling; 4. push each roller on the corresponding wire shaft of the dishrack, with the axle connector arm against the vertical part of the shaft, pushing the roller assembly against the shaft until it snaps together. NOTE: the new rollers are wider than the originals and fit snugly on the tracks; no wobbling; the connector snaps are an improved design that should last as long as the dishwasher.
Read less
DONALD from PORTLAND, ME
Difficulty Level:
Really Easy
Total Repair Time:
Less than 15 mins
6 of 10 peoplefound this instruction helpful.
Was this instruction helpful to you?
Thank you for voting!
The rollers on the bottom rack of my GE Monogram Dishwasher all broke and melted so opening and closing the rack was extremely difficult!
It couldn't have been easier. I installed the new wheels in seconds and the rack glides as perfectly as the day it was installed 11 years ago! Perfection! Your stellar website made it so easy to find the correct parts. BRAVO!!!!! I laughed! I cried! I am so ECSTATIC!!!!!
Lisa from CHARLOTTE, NC
Difficulty Level:
Very Easy
Total Repair Time:
Less than 15 mins
5 of 9 peoplefound this instruction helpful.
Was this instruction helpful to you?
Thank you for voting!
Dishwasher not cleaning properly
The kit came with the anchors and the riollers for the bottom shelf. They clipped right on! Dishwasher cleans great now!
Melissa from WARNER ROBINS, GA
Difficulty Level:
Very Easy
Total Repair Time:
Less than 15 mins
5 of 9 peoplefound this instruction helpful.
Was this instruction helpful to you?
Thank you for voting!
Bottom dish rack would not roll in and out because several wheels were off because of broken axles. It had to be lifted to get in and out which resulted in many chipped and broken dishes.
I removed the bottom rack from dishwasher. Took off the wheels with the broken axles. Put the new axles on the new wheels and slipped them on the rack. They fit perfectly and rack now glides in and out smoothly. Easy as pie, and took less than 10 minutes. Parts arrived in just two days. Thanks for the great service.
Darrell from WAHPETON, ND
Difficulty Level:
Very Easy
Total Repair Time:
Less than 15 mins
6 of 10 peoplefound this instruction helpful.
Was this instruction helpful to you?
Thank you for voting!
lower rack wheels kept falling off
delivery of part was very quick, and my husband was able to remove the old part and install the new in about 10 minutes. No service call; no new rack; just a washer that is easy to use again.
REVERIE from HAMPTON, VA
Difficulty Level:
Very Easy
Total Repair Time:
Less than 15 mins
5 of 9 peoplefound this instruction helpful.
Was this instruction helpful to you?
Thank you for voting!
Needed to replace rollers on bottom dishwasher rack
Pulled off old rollers and snapped on new ones. Never easier!
Marilyn from CALDWELL, ID
Difficulty Level:
Really Easy
Total Repair Time:
Less than 15 mins
5 of 9 peoplefound this instruction helpful.
Was this instruction helpful to you?
Thank you for voting!
< Prev
1
2
3
Next >
Questions and Answers
We're sorry, but our Q&A experts are temporarily unavailable.
Please check back later if you still haven't found the answer you need.
23 questions answered by our experts.
Sort by:
< Prev
1
2
3
Next >
Search filter:
Clear Filter
Your search term must have 3 or more characters.
Keep searches simple. Use keywords, e.g. "leaking", "pump", "broken" or "fit".
Sorry, we couldn't find any existing answers that matched.Try using some different or simpler keywords, or submit your new question by using the "Ask a Question" button above!
Ron
December 2, 2017
My lower rack wheel is falling off the axle due to the wheel retainer is broken. It is a separate part that is inserted into the wheel. The lower rack blowup does not show this part, only the wheel. I bought two new wheels and they do not include these inserts. How do i get replacements for these?
For model number PDW8400J03CC
Hello Ron, Thank you for your inquiry. We show that this kit does have the axles that insert into the wheels and clip to the dishrack with it. Hope this helps!
25 people found this helpful.
Was this helpful?
Thank you for voting!
Shelly
November 30, 2017
Part says wheels with axles but shows photo only of wheel. Does the snap in axle included?
For model number PDW8480J01SS
Hi Shelly,
Thank you for your question. Yes, the axles are included in the kit. I hope this helps. Thank you and have a great day!
13 people found this helpful.
Was this helpful?
Thank you for voting!
Gail
December 10, 2017
The wheels you have do they fit my lower rack?
For model number 66513293K112
Hi Gail,
Thank you for your question. I have listed the correct wheels for your appliance lower rack down below for you. Good luck with your repair.
Will these rollers fit or work with the LG dishwasher shown above?
For model number LDF8874ST
Hi Susan, Thank you for the question. These rollers are not listed for the model number provided. The top rack rollers are part of the guide, PartSelect Number PS7785249. The lower rack rollers are Part Number: PS3523051 and the Cutlery Rack rollers are Part Number: PS3523050. Good luck with the repair!
5 people found this helpful.
Was this helpful?
Thank you for voting!
Carlene
November 15, 2018
I have lost 3 wheels on bottom dishwasher basket. Do these work on a KitchenAid
For model number KDFE104DBL0
Hello Carlene, Thank you for contacting us. I have researched the model you have provided and have found the part you’re looking for is Part Number: PS11750057. Hope this helps, good luck with this repair!
Hello James, thank you for your question. The lower rack assembly is part number W10315890. Please enter the part number into the site for current price and availability. Good luck with your repair!
3 people found this helpful.
Was this helpful?
Thank you for voting!
Rose
March 4, 2019
KitchenAid 582 2 , f50906401, Wheels on the bottom rack have come off. where can we get them?
For model number KDTE204DSS1
Hello Rose, Thank you for contacting us. I have researched the model you have provided and have found the part you are looking for is Part Number: PS11750057. Thank you for your inquiry, good luck with this repair!
I need a wheel for bottom rack in dish washer but says my model cant befound. I have double checked and this is model number
For model number W10297953B
Hi Jennifer,
Thank you for your question. This a not a model number for a dishwasher. Here is a link from our website that you may reference on where to find the model number on your appliance, https://www.partselect.com/Model-Number-Locator+4+repair.htm. I hope this helps. Thank you and have a great day!
2 people found this helpful.
Was this helpful?
Thank you for voting!
Neil
January 2, 2020
I need the 8 lower rack wheels for my dishwasher. A search of your site says this model cannot be found. I have re-confirmed this is the model number. Thanks Neil
For model number GLDA696P0SS
Hi Neil,
Thank you for your question. The part number listed under your model number for the lower rack wheel and stud is PS1481883. We hope this helps. Thank you and have a great day!
2 people found this helpful.
Was this helpful?
Thank you for voting!
Lindi
February 13, 2020
Will these rollers work with my Kenmore elite model listed above?
For model number 665.12763K311
Hi Lindi, thank you for your question. It would not, the correct lower dishrack rollers for your appliance are: PS11750057. Good luck with your repair.
Item is in stock and will ship today if your order is placed before 4:00 PM Eastern Standard Time.
If your order is placed after 4:00 PM EST, the in stock items will ship on the next business day.
On Order
Item is not in stock and usually ships 3-5 business days from the time you place your order.
Special Order
Item is not in stock and usually ships 10-15 business days from the time you place your order.
NLA - No Longer Available
This item is no longer being made by the manufacturer, and cannot be added to your shopping cart.
[{"position":0,"name":"Home","title":"Home","url":"/"},{"position":1,"name":"Dishwasher","title":"Dishwasher","url":"/Dishwasher-Parts.htm"},{"position":2,"name":"Wheel or Roller","title":"Wheel or Roller","url":"/Dishwasher-Wheels-and-Rollers.htm"},{"position":3,"name":"WD35X21041","title":"WD35X21041","url":""}]
You added 1 item to your cart
✖
$
Qty:
Total item(s) in cart:
Order Subtotal
$
*Taxes and shipping will be applied during checkout
