Quick Question!

Have you ever purchased from PartSelect.com before?

11723180-1-S-Whirlpool-W10823377-Ice Door Kit
11723180-1-S-Whirlpool-W10823377-Ice Door Kit 11723180-2-S-Whirlpool-W10823377-Ice Door Kit 11723180-3-S-Whirlpool-W10823377-Ice Door Kit https://www.partselect.com/Schematics/Maytag/MWAJKNP1.gif

Ice Door Kit

Your Price

$53.91
Get this part fast. Average delivery time via standard shipping: 1.8 days.

PartSelect Number PS11723180
Manufacturer Part Number W10823377
Manufactured by Whirlpool

In this kit you will find the support, the ice door, spring, and delay. The heater ribbon is no longer needed and therefore will not be included with this part. This kit works in the dispenser chute to let ice through when it is being dispensed. If you have the following symptoms such as: door sweating, difficulty opening or closing door, frost buildup, warm freezer section, or problems with ice dispensing, then this is a solution. The tools needed for this repair are a putty knife, needle nose pliers, and 1/4 inch nut driver. Wear work gloves to protect your hands when performing this repair.

This part works with the following brands: Whirlpool, Kenmore, KitchenAid, Roper, Estate, Crosley, Maytag, Inglis, Amana, Dacor.

This part works with the following products: Refrigerator, Range.

This part fixes the following symptoms:

  • Ice maker won’t dispense ice.
  • Door Sweating.
  • Leaking.
  • Door won’t open or close.
  • Ice maker not making ice.
  • Freezer section too warm.
  • Frost buildup.

Videos For installing this part.

Questions & Answers

Ask our experts a question on this part and we'll respond as soon as we can.

Most Helpful

Question:

Where can I find the video showing how to replace this part- the ice door repair kit? I have the kit but need the instructions on how to replace it.

Ann Collier
Answer:

Hi Ann, Thank you for the question, Please see below for a link to the video. https://youtu.be/2UVP9vBbxGQ Hope this helps!

5 people found this helpful.

Most Recent

Question:

We recently had a power outage. When the power came back on, my ice maker works fine, but it seems like the motor that makes the ice come out of the door isn't working. At first i thought maybe because the ice got a little bit watery something might be frozen, but there isn't an ice buildup. Would it make sense that this is the part that i would replace? Thanks in advance for any help.

Julie for model number gs5shaxnl00
Answer:

Hi Julie, Thank you for your question. This part could be the problem however you may also want to check your ice dispenser motor as well. I hope this helps. Good luck with your repair.

Installation Instructions Provided by PartSelect customers like you.

Average Repair Rating: 3.2 / 5.0, 33 reviews What's this?
 

6 of 10 people found this instruction helpful

Parts Used:
  • Ice Door Kit
Level of Difficulty: A Bit Difficult
Time to do repair: 1- 2 hours
Tools: Screw drivers
Customer: Daisy from MIAMI, FL

Ice tray and door funnel woulf freeze

took apart panel from door and removed old part and installed new part.It's difficult if you have big hands. Best if you have someone hold up wire panel while you are installing.

It was great repaired the problem for under $60

Help other customers find the most helpful instructions.

Were these instructions helpful?   

8 of 16 people found this instruction helpful

Parts Used:
  • Ice Door Kit
Level of Difficulty: Easy
Time to do repair: 30 - 60 mins
Tools: Pliers, Screw drivers
Customer: Tony from Lake Forest Park, WA

The door shoot plastic had cracked allowing air to get into the freezer compartment.

I unplugged the fridge, removed the face plate on the front, disconnected the power feeds, unscrewed the electrical panel and moved it out of the way.
I then dismantled and removed the broken part and installed the new part. I was able to use the rest of the existing parts to get the job done.
I put everything back together, and voila! it works great.

Help other customers find the most helpful instructions.

Were these instructions helpful?   

5 of 8 people found this instruction helpful

Parts Used:
Level of Difficulty: Really Easy
Time to do repair: Less than 15 mins
Tools: Screw drivers
Customer: Darin from MADERA, CA

Ice door broken front cover replacement

Un snap the front cover panel removed two screws removed one more screw removed broken part replaced with new parts replaced screws snapped on new front panel and was done now no more ice build up in ice shoot from out side air. my 17 year old son could have done it. very easy repair.

Help other customers find the most helpful instructions.

Were these instructions helpful?   

3 of 3 people found this instruction helpful

Parts Used:
Level of Difficulty: Really Easy
Time to do repair: 30 - 60 mins
Tools: Screw drivers
Customer: Mauricia from SAN ANTONIO, TX

Was not dispensing ice

PLEASE UNPLUG REFRIGERATOR FIRST. Through You Tube, removed the ice door parts and carefully replaced all the components with use of a screw driver. Cover detaches from the bottom and move upward when loose. May have silicone around cover. Once complete attach cover back on. The inside of the freezer door right under the ice container you need to remove the guard and looking up under it you will see the cover with 2 screws, remove and ice auger drive motor will be exposed. carefully drop down and unplug electrical feed band and replace with the new one and push up again, screw back cover and done. IT IS WORKING BEAUTIFULLY!!

Help other customers find the most helpful instructions.

Were these instructions helpful?   

2 of 2 people found this instruction helpful

Parts Used:
  • Ice Door Kit
Level of Difficulty: Easy
Time to do repair: 1- 2 hours
Tools: Nutdriver, Pliers, Screw drivers
Customer: Robert C from Omaha, NE

Right hinge broken broken on housing of ice dispenser door flap. Had to make a mini hinge part to hold rod which holds flapper spring in place

After fabricating a new part to hold the spring rod in place, so the dispenser flap would close tightly in place. Every thing else to reassemble was very easy.

Help other customers find the most helpful instructions.

Were these instructions helpful?   

5 of 11 people found this instruction helpful

Parts Used:
  • Ice Door Kit
Level of Difficulty: Easy
Time to do repair: 30 - 60 mins
Tools: Nutdriver, Pliers, Screw drivers
Customer: Bill from Mesquite, TX

Ice dispenser was freezing up due to the broken door

The repair went pretty easy. You must remove the cover and lift up the electronics to gain access. The instructions were a little vague since the new door/chute didn't have the electric heater wire. I eventually realized that it wasn't needed and replaced the door without further incident.

With a new valve in the back, I now have water and ice at the door after a couple year hiatus!

Thanks.

Help other customers find the most helpful instructions.

Were these instructions helpful?   

18 of 50 people found this instruction helpful

Parts Used:
Level of Difficulty: Easy
Time to do repair: 1- 2 hours
Tools: Nutdriver, Screw drivers
Customer: Hoyt A Sulvin Sr from Irwindale, CA

Ice make would not dispense out the front door.

Unpluged the unit and removed the front trim ring.
removed the old parts and installed the new parts.
in reverse order. it took about 12 hour but the dispenser to work but seems to work fine now.

Help other customers find the most helpful instructions.

Were these instructions helpful?   

4 of 9 people found this instruction helpful

Parts Used:
Level of Difficulty: Easy
Time to do repair: 15 - 30 mins
Tools: Screw drivers
Customer: Jerry from Hephzibah, GA

Will not make ice

turned off the machine. removed the ice maker door. removed the wiring harness cover. press on locking clips, removed ice maker. disconnect wiring harness. removed three screws from cover and installed on new ice maker. installed in reverse order of removable.

Help other customers find the most helpful instructions.

Were these instructions helpful?   

4 of 9 people found this instruction helpful

Parts Used:
  • Ice Door Kit
Level of Difficulty: A Bit Difficult
Time to do repair: 30 - 60 mins
Tools: Screw drivers
Customer: Stacey from Kingman, KS

The ice door chute was not closing tightly, so there was a freeze/thaw problem which was slugging up the ice auger.

I killed the power to the fridge on my breaker box before I started the repair job. I popped the dispenser panel off by slipping two screwdrivers(one in each slot on the bottom of the panel). Then I removed two screws on the wire panel beneath in order to get to the ice door chute. (Take a mental note of how all the parts are positioned that you must replace.) I had to remove the pin in the ice door lever, then I replaced the spring and the ice door(flapper) with the new ice door support (timed release closure). The new ice door support doesn't require the white shroud that existed on the previous part. The most difficult part of this repair was having the patience to deal with the wire panel dangling in the way, and trying to contort myself in awkward positions to be able to see what I was doing. My hands are large, so it was difficult to maneuver them in order to make everything fit back together. If you have someone to hold the panel up out of the way while you are working, it would be much easier. If you have a short mechanic's creeper chair, it would be helpful!

Help other customers find the most helpful instructions.

Were these instructions helpful?   

1 of 1 people found this instruction helpful

Parts Used:
  • Ice Door Kit
Level of Difficulty: Really Easy
Time to do repair: 15 - 30 mins
Tools: Screw drivers
Customer: Donald from PONTIAC, IL

Ice door kit

Followed your instruction video

Help other customers find the most helpful instructions.

Were these instructions helpful?   

1 of 1 people found this instruction helpful

Parts Used:
  • Ice Door Kit
Level of Difficulty: Really Easy
Time to do repair: 30 - 60 mins
Tools: Nutdriver, Pliers
Customer: Ramstack from SAN ANTONIO, TX

Attaching ice door to hinge assembly-only works one way

My model is not exactly as described in you video (a: the power assembly is snapped in, not bolted on; b) the door hinge is snapped into place, not pushed through a hole in the bracket). One mistake I made was snapping the hinge assembly on the new ice door upside down. I quickly realized my mistake when the door would not close when installed. It may be obvious, but you may want to point this out in the next version of installation video. Regards.

Help other customers find the most helpful instructions.

Were these instructions helpful?   

1 of 1 people found this instruction helpful

Parts Used:
Level of Difficulty: Very Easy
Time to do repair: 30 - 60 mins
Tools: Screw drivers
Customer: Donald from PINEVILLE, LA

Ice dispenser lever did not work

I followed the video on your website.

Help other customers find the most helpful instructions.

Were these instructions helpful?   

1 of 1 people found this instruction helpful

Parts Used:
  • Ice Door Kit
Level of Difficulty: A Bit Difficult
Time to do repair: 30 - 60 mins
Tools: Nutdriver, Pliers, Screw drivers
Customer: Ed from HINGHAM, MA

Frost and ice build up in freezer; could get only crushed ice-no cubes

I followed the video provided with the email confirmation for my order. There was one difference with my installation. The video said to remove the pin by pushing to the left. In my case, the right end of the pin had a head on it and pushing it to the left was not possible. I had to remove a "keeper" on the left end of the pin and remove it to the right. Also, the chute/dispenser arm did not remove easily, so I left it in place. Finally, I did not reinstall the heating element as directed by the video since the website said this was no longer necessary. Overall, the repair fixed the problem and I am very happy with my experience with this site

Help other customers find the most helpful instructions.

Were these instructions helpful?   

1 of 1 people found this instruction helpful

Parts Used:
  • Ice Door Kit
Level of Difficulty: Easy
Time to do repair: 30 - 60 mins
Tools: Screw drivers, Socket set
Customer: Joan from HYDE PARK, NY

Original plastic brackets holding ice door kit were broken.

Door gap occurred, creating a flow of warm air into the ice bin, the ice constantly melted and refroze into one block. This rendered the unit unusable.The paper instructions that come with the kit show very poor photos. I followed the instructions on the video noted below. The only problem with the repair kit is that it does not contain the tinnerman clip that secures the pin in the brackets. However, it seems to be holding without it. And in any case if something goes wrong, I'll check that part first. Joan. Fortunately, this video was available online: Refrigerator Ice Dispenser Chute Door (part #WP2180353)-

Help other customers find the most helpful instructions.

Were these instructions helpful?   

6 of 17 people found this instruction helpful

Parts Used:
  • Ice Door Kit
Level of Difficulty: A Bit Difficult
Time to do repair: More than 2 hours
Tools: Screw drivers
Customer: John from Palmdale, CA

Ice flap in door was not closing causing excess frost

replaced ice flap unit

Help other customers find the most helpful instructions.

Were these instructions helpful?   

Model Cross Reference

This part works with the following models:

PartSelect Number: PS11723180
Manufacturer Part Number: W10823377
Brand Model Number Description
Kenmore10641522500Refrigerator
Kenmore10641523500Refrigerator
Kenmore10641524500Refrigerator
Kenmore10641529500Refrigerator
Kenmore10644022600Refrigerator
Kenmore10644022601Refrigerator
Kenmore10644022602Refrigerator
Kenmore10644022603Refrigerator
Kenmore10644023600Refrigerator
Kenmore10644023601Refrigerator
Kenmore10644023602Refrigerator
Kenmore10644023603Refrigerator
Kenmore10644024600Refrigerator
Kenmore10644029600Refrigerator
Kenmore10644029601Refrigerator
Kenmore10644029602Refrigerator
Kenmore10644029603Refrigerator
Kenmore10644032600Refrigerator
Kenmore10644032601Refrigerator
Kenmore10644032602Refrigerator
Kenmore10644032603Refrigerator
Kenmore10644033600Refrigerator
Kenmore10644033601Refrigerator
Kenmore10644033602Refrigerator
Kenmore10644033603Refrigerator
Kenmore10644034600Refrigerator
Kenmore10644039600Refrigerator
Kenmore10644039601Refrigerator
Kenmore10644039602Refrigerator
Kenmore10644039603Refrigerator