See part 28 in the diagram

Get in touch, we're here to help!

Open until 10PM EST

customerservice@partselect.com

Ice Bucket Auger

★★★★★

10 Reviews

$ 171.91

In Stock

Get this part fast. Average delivery time via standard shipping: 1.8 days.

PartSelect Number PS11723175

Manufacturer Part Number W10822606

Manufactured by Whirlpool

Product Description
Troubleshooting
Questions and Answers
Customer Repair Stories
Customer Reviews
Model Cross Reference

Product Description

Ice Bucket Auger Specifications

This auger motor is for refrigerators. Auger motor turns the auger that pushes the ice cubes through the dispenser chute. Safely store any food that could deteriorate while the power is off. Unplug the refrigerator before installing this part. Wear work gloves to protect your hands.

How Buying OEM Parts Can Save You Time and Money

Troubleshooting

This part fixes the following symptoms:

Ice maker won’t dispense ice

This part works with the following products:

Refrigerator.

This part works with the following products:

Whirlpool, Kenmore, KitchenAid, Maytag.

Part# W10822606 replaces these:

AP5985114, 2322580, 2326873, W10215646, W10271506, W11185741, W11298175

Questions and Answers

We're sorry, but our Q&A experts are temporarily unavailable.
Please check back later if you still haven't found the answer you need.

8 questions answered by our experts.

Sort by:

Frank

November 14, 2017

Is there any way to test the motor? Is it possible for the motor to have simply frozen and just needs to thaw out and be reinstalled?

Hi Frank, Thank you for the question.I suggest removing the motor to tray and unthaw it first.Here are a few things to check that might cause the motor to freeze up.Check for an air leak or gap in the door gasket. You can also check the dispenser door for an air leak, and the ice dispenser flapper door for proper closure and seal. Make sure the freezer compartment isn't too cold, the average temperature should be 0 to 5 degrees. Hope this helps!

10 people found this helpful.

Was this helpful?

Thank you for voting!

LELAND

December 14, 2018

The motor that turns the auger and crushes the ice cubes is broken. Everything else within the ice cube maker seems to be working. I just can not activate the motor to crush or dispence the ice cubes. Is this the correct part for replacement? Looking at that portion of the ice maker, it appears there are just two or three hex nuts to remove and then lift out the assembly. Am i correct? The new motor would be replace there and then reassemble? We can dispense water but not ice cubes. Thank you!

For model number ED5FHAXVS

Hello Leland, Thank you for your inquiry. Yes, this would be the correct part number for the motor to activate the auger and blades. We have found the following installation instructions: remove access panel and disconnect the wire. Remove the 4 screws that hold the motor in place. Place rubber washer (that is supplied with new motor) onto shaft. Replace new motor and connect wire then install access panel. Hope this helps!

10 people found this helpful.

Was this helpful?

Thank you for voting!

Kevin

December 7, 2017

Freezer stopped working and the ice maker. Motor was running and making loud noise. Finally stopped making noises. Checked motor and it was hot while still plugged in. Do I need to replace the motor only.

For model number Kfis29bbms00

Hi Kevin, Thank you for the question. Unless there is visible damage to the wire harness, you should be able to replace just the motor assembly.Hope this helps!

2 people found this helpful.

Was this helpful?

Thank you for voting!

Ken

February 3, 2020

While trying to dispense ice cubes, switching over to crushed ice, ice stopped dispensing and will not dispense either crushed or cube. Water dispenser still works, as well as making ice. Emptied the ice bin to check auger (was not stuck), but still no dispensing. Immediately after the stoppage occured could smell electrical/electronic burn/melt odor. Everything else within the ice cube maker seems to be working (making ice cubes, dispensing water). Did an inspection of the control panels circuit board, nothing visually burnt/melted. Is the motor the correct part for replacement? Or should i be looking at sensors, switches, etc. Thank you!

For model number Kenmore 10645423800

Hello, Thank you for your question. I would look into the motor, because it if it not allowing any ice through then that could be why if the motor is not turning. We hope this helps.

2 people found this helpful.

Was this helpful?

Thank you for voting!

Phil

January 28, 2019

Kitchen aid side by side fridge , model number KSF22C4CYY00, ice machine auger in freezer door does not work, is there a switch that operates motor. Auger part number w10822606. Should I just replace motor?

For model number KSF22C4CYY00

Hello Phil, Thank you for the question. If there is no damage or wear tot he shaft or washers, it is recommended to replace the motor. Thank you for your inquiry, good luck with this repair!

1 person found this helpful.

Was this helpful?

Thank you for voting!

Annette

December 30, 2019

Motor (w10215646) is out, i found it on your site. The main question i have is the ice maker stops making ice for a few weeks and i put bag ice in the bucket. (that’s what broke the motor. Ice too hard). Then after a time it starts making ice again. Have you run across this problem with one stoping then after a few days start back to making ice again?

For model number BFT2673BEW10

Hello Annette and thank you for writing. Actually we have, it turned out to be the water inlet valve being faulty. The model number you provided is not recognized. Please verify the number you provided us. If it is correct, we recommend contacting the manufacturer and seeing if they could provide you with a part number, and then you are always welcome to check back to see if we carry the part! We hope this helps. Please contact us anytime if you require further assistance.

1 person found this helpful.

Was this helpful?

Thank you for voting!

Thomas

November 16, 2018

Motor does not turn to deliver ice through the door

For model number Ksrv22fvms02

Hi Thomas, thank you for your question. It is likely then that you will have to replace your motor. However you may want to take a look at your auger shaft and make sure it has not stripped. You could also take a look at the micro switch on your dispenser area as well. I hope that helps. Good luck with your repair.

Was this helpful?

Thank you for voting!

Phil

January 28, 2019

Auger motor in door does not spin , probably bad motor, but is there a switch or micro switch?

Hello Phil, thank you for contacting us, In order for us to locate the correct parts and repair information we will require the model number of the unit. Once you have located the model number please feel free to resubmit the question and we will be happy to help you. Look forward to hearing from you!

Was this helpful?

Thank you for voting!

Customer Repair Stories

Average Repair Rating: 3.7 / 5.0, 7 reviews. What's this?

Sort by:

Ice dispenser motor burnt out, water got inside.

Purchased new motor from Partselect.com. When it arrived it came with a new rubber washer that fitted on top of new motor that was not on old motor, that how water got into old motor. However, the instruction sheet did not give info on how to access the proper way to the motor that is the door. Not wanting to damage the freezer door assy. called in a tech who made it look easy, but even he had a little problem locating access panel that was directly under the motor in the freezer side of the door. After that it was a piece of cake.

Blye from Victoria, VA
Difficulty Level:
Really Easy
Total Repair Time:
1- 2 hours
Tools:
Nutdriver, Screw drivers
Parts Used:
W10822606