Keep searches simple. Use keywords, e.g. "leaking", "pump", "broken" or "fit".
Sorry, we couldn't find any existing reviews that matched. Try using some different or simpler keywords.
★★★★★
★★★★★
David C - August 12, 2022
Verified Purchase
Very easy repair. Fixed the problem.
Our 20-year-old fridge suddenly started getting hot around the edges and top. The condenser was very hot, and it was clear that the fan was running anemically to not at all. The repair took 5-10 minutes, and the old fridge is working correctly again.
★★★★★
★★★★★
MIKE H - June 22, 2021
Verified Purchase
Received as ordered, easy installation
The part was exactly as I had ordered and was shipped and received in a very acceptable time frame. Easy installation and worked great.
★★★★★
★★★★★
Carole S - April 28, 2019
Verified Purchase
simple fan repair
We got the part in 2 days, put it on, cleaned out all the dust and the fridge is working fine! Your website is easy to use and the video was excellent! Thank you!
★★★★★
★★★★★
Tim C - April 15, 2019
Verified Purchase
Replace condenser motor
Work great would recommend
★★★★★
★★★★★
Pamela B - April 8, 2019
Verified Purchase
Part as stated, easy repair
The part was perfect and now my Fridge is cold. Easy peasy install.
★★★★★
★★★★★
Mai H - August 14, 2018
Verified Purchase
Excellent customer service.
Good packaging, work well after installed. I also need the refund for the part has been returned.
★★★★★
★★★★★
Mark P - August 9, 2018
Verified Purchase
Perfect fit - works great!
Fast delivery. Part fit as expected. Refrigerator running cool now.
< Prev
1
Next >
Customer Repair Stories
Average Repair Rating: 4.0 / 5.0, 7 reviews.
What's this?
Sort by:
< Prev
1
Next >
Search filter:
Clear Filter
Your search term must have 3 or more characters.
Keep searches simple. Use keywords, e.g. "leaking", "pump", "broken" or "fit".
Sorry, we couldn't find any existing installation instruction that matched.
Motor Bearings Locking Up
Removed the back panel on the refrigerator--unplugged the condenser fan motor--removed the motor--placed a small fan to cool the condenser--called parts select--ordered the motor--the motor arrived less than 24 hours after I ordered it--replaced the motor and rear panel on the refrigerator--probably saved more than $200. 00--Very happy wi
... Read moreth parts select service--plus I had a misunderstanding with my credit card and john at parts select was very helpful --not their fault--excellent company
Read less
Joseph from North Palm Beach, FL
Difficulty Level:
Easy
Total Repair Time:
30 - 60 mins
Tools:
Nutdriver
7 of 8 peoplefound this instruction helpful.
Was this instruction helpful to you?
Thank you for voting!
The fan wouldn't run as needed. The top of the refrigerator was really hot.
My husband took the old motor out by taking the screws out. Then, he unplugged the fan. We searched your site for the part. With the pictures on the site, we were able to match the motor exactly. The delivery was really fast. When we received the part, he installed the fan and plugged in the power connector. We have replaced refrigerator
... Read morefans before but anyone can do this with no experience. Just follow the instructions and you're all set.
Read less
Teresa from Moneta, VA
Difficulty Level:
Really Easy
Total Repair Time:
Less than 15 mins
Tools:
Nutdriver, Screw drivers
12 of 15 peoplefound this instruction helpful.
Was this instruction helpful to you?
Thank you for voting!
The after market 4 yr old motor was making a wierd noise.
Removed back panel and removed the motor put new quick disconnect on and tapped the mounting holes. Removed and cleaned fan blade from old motor and put on the new motor. Mounted motor plugged it in and replaced panel.
Marcus from St Petersburg, FL
Difficulty Level:
A Bit Difficult
Total Repair Time:
30 - 60 mins
Tools:
Nutdriver, Screw drivers
9 of 13 peoplefound this instruction helpful.
Was this instruction helpful to you?
Thank you for voting!
Suspected fan failure
I pulled the refer from the wall, disconnected the power and removed the cardboard cover at the base. Using a vacuum and compressed air, I cleaned it thoroughly. I used a screwdriver to lift the locking tab on the 3-wire connector and removed it. The best way to get the three bolts off was with a 1/4" drive ratchet and go to the std
... Read more nutdriver handle when they were loose. The fan came out carefully with the blade. I removed the blade nut with flat nosed pliers, cleaned it and placed it on the new motor. I replaced the motor and installed the screws. On a do-over I would install onew screw in each hole at least halfway to get the threads started/ threaded. After that the connector slipped in and I spun the blade to check for interference. The blades can be slightly bent, but use of nut tension can also slightly adjust fan alignment as it's tight to the housing. That's it
Read less
Don from Oregon City, OR
Difficulty Level:
Really Easy
Total Repair Time:
Less than 15 mins
Tools:
Nutdriver, Screw drivers
12 of 14 peoplefound this instruction helpful.
Was this instruction helpful to you?
Thank you for voting!
Noisy and the Fan wasn't blowing like it should
I saved my Whirlpool Refrigerator (Model ET21GKXHN00) and learned a lesson. Don’t put off cleaning the refrigerant coils underneath the refrigerator. I replaced the refrigerator about 10 years ago and began to notice that the sound of this one running had changed slightly. I remembered that’s what happened to the first one just before
... Read moreit died. I removed the panel on the bottom front and saw that the refrigerant coils were covered with dust. It was really bad. I vacuumed them with the “radiator attachment” on the vacuum cleaner and plugged the refrigerator back in. It still didn’t sound right and I couldn’t feel the air blowing out like it should. So I rolled the refrigerator out and removed the back lower cover to see the compressor and the cooling fan. The fan was clogged with dust so I vacuumed that as well. But the fan wouldn’t spin freely by hand. The fan motor only had 3 screws holding it onto the plastic fan bezel and was easily removed by unsnapping the electrical connector on the motor. I removed the fan motor and tried to clean it with a few drops of WD40 on the shaft. But when I put it all back and plugged it in the fan just barely started turning. I unplugged the refrigerator and ordered the fan motor from PartSelect.Com (Item Number PS371043). The picture looked exactly like the motor that was in my refrigerator. I threw everything away in the refrigerator, cleaned it out and left it unplugged until the motor came. The motor arrived in a few days and it looked exactly like the one I had removed. It had the same electrical specifications stamped on the back and the electrical connector was the same and in the same location on the motor. I put the fan blade on the new motor and installed it exactly like the old one was. It only took 15 minutes or so and was very easy to install. When I plugged the refrigerator in the compressor started right away and so did the fan. It ran like a champ. In a few hours the refrigerator got cold and began to cycle on and off like normal and the fan blows like new. The sound is normal and the total running sound is quiet again like a new refrigerator. So for $84.67 I saved my $1300 refrigerator and learned not to neglect checking the build up of dust in the compressor fan section. I’m sure that’s what happens to most of the refrigerators people put out for trash pickup in front of their houses. The cause of the problem is when air flow is restricted across the refrigerant coils too much heat returns to the compressor and eventually causes the compressor to fail. I appreciate that we live in a time when you can order exactly what you need on the internet and make home repairs when you need to. Thanks Part Select for sending me the correct part. It’s nice to have milk and cold drinks again.
Read less
William from Centreville, VA
Difficulty Level:
Really Easy
Total Repair Time:
15 - 30 mins
Tools:
Nutdriver, Screw drivers, Socket set
35 of 36 peoplefound this instruction helpful.
Was this instruction helpful to you?
Thank you for voting!
Noticed fridge not cooling as it should
Removed the lower back panel (10 small screws)Found the condenser motor froze up and not moving air across the cooling coils.So I got a small table fan and set it behind the fridge and it kept the fridge cooling for 3 days till the new fan motor arrived. Removed 3 small screws holding the fan motor in the bracket and unpluged the wiring h
... Read morearness.Removed the fan from old motor and used it on the new motor.Replaced the fan in the bracket and plugged the wiring harness back in. Worked great. Very easy.Did not have to empty fridge because table fan kept coils cool. Ordering part was easy and shipping fast.Great job guys!!
Read less
Robert from Franklin, TX
Difficulty Level:
Really Easy
Total Repair Time:
Less than 15 mins
Tools:
Nutdriver
21 of 21 peoplefound this instruction helpful.
Was this instruction helpful to you?
Thank you for voting!
Believed the condensor motor was defective and causing strange odor
First disconnected the quick release electrical connection. Then loosened the three screws that were holding the motor in the bracket. However, space is limited and even with small hands it was rather difficult as the screws were in there very tight. There are a few sharp edges on the bracket and in the surrounding area of the motor ar
... Read moreea, and nicked myself a couple of times. Removed the fan blade from the old motor and attached it the new motor with the old flat washer/screw. Reconnected the electrical connection and that was that. All-in-all an easy repair.
Read less
Nicholas from Frankfort, IN
Difficulty Level:
Easy
Total Repair Time:
30 - 60 mins
Tools:
Nutdriver, Pliers, Socket set
45 of 51 peoplefound this instruction helpful.
Was this instruction helpful to you?
Thank you for voting!
< Prev
1
Next >
Questions and Answers
Ask our experts a question about this part and we'll get back to you as soon as possible!
4 questions answered by our experts.
Sort by:
< Prev
1
Next >
Search filter:
Clear Filter
Your search term must have 3 or more characters.
Keep searches simple. Use keywords, e.g. "leaking", "pump", "broken" or "fit".
Sorry, we couldn't find any existing answers that matched.Try using some different or simpler keywords, or submit your new question by using the "Ask a Question" button above!
Cassandra
July 19, 2019
The instructional video and the customers who installed this condenser fan motor do not say anything about using a self tapping screw to make new threads on the motor. But on the order page it mentions needing one. Do i need one or not?
For model number ED20TQXFW01
Hello Cassandra, thank you for your question. This replacement Condenser Fan Motor for your model does require self tapping screws. Screws are included. Good luck with your repair!
8 people found this helpful.
Was this helpful?
Thank you for voting!
Douglas
June 29, 2021
I have a Kenmore 10677297790. The motor looks right but the wiring harness on the refrigerator has 2 green wires, 2 red wires and 2 white wires whereas the replacement harness has 1 of each. Do I cut off the fan motor connector and attach the single red, green white wires to the combined 2 into one red, green and white and use the old connector?
For model number 10677297790
Hello Douglas, Thank you for the question. The part has been updated by the manufacture. The 2 pin would connect to the red wire on the condenser fan motor and the 2 white will go to the white wire on the condenser motor. The green wire will go to ground. We hope this helps!
4 people found this helpful.
Was this helpful?
Thank you for voting!
Chris
March 9, 2023
The fan I need to replace is in freezer, behind a panel. Works but noisy. Your video shows the man replacing a fan in back near comp. Is this the fan I need? Thank you
For model number 1069750383
Hi Chris, thank you for reaching out. According to our research, the part you may need to replace to fix the issue is the evaporator fan blade, part number PS11738954. We hope this helps, good luck with the repair!
Hello I have replaced the condenser fan before. The doors were very hot, fixed the issue 6years ago. Now the problem I'm having is that the fan doesn't even start when plugged in should I replace the motor again or should I start shopping for a new spare fridge. Thanks
For model number Rt18dkxhw00
Hi Dean, thank you for the question. Based on our research, if the condenser fan motor, part number PS11723170, does not start, then it is most likely faulty and may need to be replaced. We hope this solves your problem!
Was this helpful?
Thank you for voting!
< Prev
1
Next >
✖
Ask a Question
Ask our experts a question on this part and we'll respond as soon as we can.
