Whirlpool/Whirlpool_Thumb/SNBNEJXS.gif
See part 27 in the diagram

Get in touch, we're here to help!

Open until 10PM EST

customerservice@partselect.com

SENSOR

$51.10   In Stock

Get this part fast. Average delivery time via standard shipping: 1.8 days.

PartSelect Number PS11723108
Manufacturer Part Number W10816105
Manufactured by Whirlpool
Troubleshooting
This part works with the following products:
Dryer.
This part works with the following products:
Whirlpool, Kenmore, KitchenAid, Maytag.
Part# W10816105 replaces these:
3976479
Questions and Answers

We're sorry, but our Q&A experts are temporarily unavailable.
Please check back later if you still haven't found the answer you need.

8 questions answered by our experts.
    Sort by:
    Sorry, we couldn't find any existing answers that matched.Try using some different or simpler keywords, or submit your new question by using the "Ask a Question" button above!
    Dennis
    September 9, 2017
    How do i replace the moisture sensor. The dryer is not sensing the clothes are dry, just keeps running and if i don't remember to check after a set time clothes get very hot. Part no. In diagram is 27
    For model number LEQ8800JQ1
    Hi Dennis, Thank you for your inquiry. I have found a video on our website that you may reference on how to install the moisture sensor. You will find the video under part number PS11741408. I hope this helps. Thank you and have a great day!

    3 people found this helpful.

    Was this helpful?
    Thank you for voting!
    Related Parts:
    Carl
    March 19, 2018
    The dryer shuts off before the cloths are dry. Exhaust tube and interior of dryer have been cleaned. If dryer vent screen is scrubbed with tooth brush after each cycle dryer will dry cloths correctly. Dryer only has a timer and no moisture sensor cycle. What is causing the the problem?
    For model number 11069622800
    Hi Carl, Thank you for your question. There are a few parts that you can check. I would suggest checking all of your thermostats and your thermal fuses. According to your model number, your appliance actually does have a moisture sensor, it is the part that you have questioned underneath. So you should check that as well. I would also suggest taking a look at your exhaust hose and make sure you don't have a build up of lint inside of the hose that goes to the outside. Sometimes that will make your appliance over heat and so your thermostats and thermal fuses will shut down the appliance. I hope that helps. Good luck with your repair.

    1 person found this helpful.

    Was this helpful?
    Thank you for voting!
    Rich
    May 3, 2018
    I've thoroughly cleaned the exhaust vent and replaced the thermal fuse and internal bias thermostat. When i use the "more dry / less dry" setting, the dryer does not heat at all and i smell natural gas. When i use the "timed dry" setting, the heat kicks in. But near the end of the cycle i can smell gas again. Thanks for any suggestions.
    For model number 11074922200
    Hi Rich, Thank you for your question. There are a few other parts that you can take a look at for no heat. You should take a look at your radiant flame sensor, your igniter itself, and your door switch. You should be able to test all of those parts with a multi meter to see if any of them are malfunctioning. I hope that helps. Good luck with your repair.

    1 person found this helpful.

    Was this helpful?
    Thank you for voting!
    John F.
    November 17, 2019
    A piece of the dryer got tangled up and ripped off of the bulkhead. I think it is part 24 however i remember it had a wire also attached to the part which is not shown on the parts diagram. What is the name of part 24?
    For model number WGD5900SW0
    Hello John, thank you for your question. That is the Moisture Sensor, part number PS11723108 for your model dryer. The Jumper Wire is part number PS11741634. I hope this helps!

    1 person found this helpful.

    Was this helpful?
    Thank you for voting!
    Thomas
    December 30, 2019
    Can you use the dryer when the inside sensor number 25 has fallen off
    For model number WED5000DW2
    Hello Thomas, Thank you for the question. In most cases the dryer will not dry the clothes properly without the sensor. Hope this helps!

    1 person found this helpful.

    Was this helpful?
    Thank you for voting!
    Melissa
    March 29, 2019
    Mfg # w10816105 moisture sensor fell out of the dryer. While looking at the replacement part it looks just like what i have that will not stay in place. Is there another part that will keep it in place. The bottom slot on the dryer is way bigger than the top slot.
    For model number LEQ9508PW0
    Hi Melissa, Thank you for your question. There is a video on our website that you may reference on how to install the moisture sensor. You will find the video under part number PS11741408. I hope this helps. Thank you and have a great day!

    Was this helpful?
    Thank you for voting!
    Matt
    March 13, 2020
    When using accudry sensor function, dryer does not always heat. It still heats on timed dry and other settings, just not always in the sensor position.
    For model number WED5000DW2
    Hello Matt, Thank you for your question. Our sources suggest replacing the timer under part PS11749833 for your model to fix the sensor cycle issues. We hope this helps.

    Was this helpful?
    Thank you for voting!
    Related Parts:
    Larry
    May 6, 2018
    Dryer will not start. Belt is good and door switch appears to turn light and timer on and off but barrel will not turn. What else could be the problem other than the motor?
    For model number LEQ7030KQ1
    Hi Larry, Thank you for your question. You should probably take a look at your thermal fuse, your push to start switch, and your thermostats. Those would be the most likely parts that could cause the issue. You should be able to test them with a multi meter. I hope that helps. Good luck with your repair.

    Was this helpful?
    Thank you for voting!
      Model Cross Reference
      This part works with the following models:
      PartSelect Number: PS11723108
      Manufacturer Part Number: W10816105
      Brand
      Model Number
      Description
      Kenmore
      11060812990
      Dryer
      Kenmore
      11060814990
      Dryer
      Kenmore
      11060817990
      Dryer
      Kenmore
      11061202010
      Dryer
      Kenmore
      11061202011
      Dryer
      Kenmore
      11061252010
      Dryer
      Kenmore
      11061252011
      Dryer
      Kenmore
      11061802000
      Dryer
      Kenmore
      11061804000
      Dryer
      Kenmore
      11061812000
      Dryer
      Kenmore
      11061814000
      Dryer
      Kenmore
      11062802100
      Dryer
      Kenmore
      11062802101
      Dryer
      Kenmore
      11062802102
      Dryer
      Kenmore
      11062812100
      Dryer
      Kenmore
      11062812101
      Dryer
      Kenmore
      11062822100
      Dryer
      Kenmore
      11062822101
      Dryer
      Kenmore
      11062822102
      Dryer
      Kenmore
      11062824100
      Dryer
      Kenmore
      11062824101
      Dryer
      Kenmore
      11062824102
      Dryer
      Kenmore
      11062832100
      Dryer
      Kenmore
      11062832101
      Dryer
      Kenmore
      11062842100
      Dryer
      Kenmore
      11062852100
      Dryer
      Kenmore
      11062852101
      Dryer
      Kenmore
      11062854100
      Dryer
      Kenmore
      11062854101
      Dryer
      Kenmore
      11062872100
      Dryer

      Get in touch, we're here to help!

      Open until 10PM EST

      Contact Customer Service