Keep searches simple. Use keywords, e.g. "leaking", "pump", "broken" or "fit".
Sorry, we couldn't find any existing answers that matched.Try using some different or simpler keywords, or submit your new question by using the "Ask a Question" button above!
January 15, 2019
The heating element in my washer isn’t working. There seems to be no voltage coming from the control board to the element. Is there anything else I should check before ordering the control board?
For model number 66515113K216
Hello Garrett, Thank you for the question. I suggest testing the High Limit Thermostat, PartSelect Number PS11743423. This part acts as as safety mechanism that keeps the dryer from overheating. Once the dryer temperature reaches a certain point, this part will shut down power to the heating element. You can test it with a multimeter to see if it has continuity. I would also double check the wiring going to the heating element for any visible damage. Hope this helps!
Our dishwasher does not complete it's wash cycle. It will run about half way and then stop with the button flashing. If I hit the wash button again it will finish washing the dishes. Do I need to replace the control circuit board? It works fine when I use the one hour cycle.
For model number 665-15119k215
Hi Robert, as best as we can guess it does seem like a control board issue. Thank you for your question and good luck with your repair!