This OEM gray Dishwasher Lower Dishrack Wheel Assembly is a plastic kit that allows the rack to slide in and out of the dishwasher easily. If it breaks or becomes damaged. sliding will feel difficult. This can happen due to normal wear and tear, and the part should be replaced if this occurs. Check your model number and user manual to make sure this part is correct. It attaches directly to the dishrack. To repair, open the dishwasher door and pull out the lower dishrack. Next, push the tab from both sides and it should pop out. To install the new wheel assembly, place it on the rack and make sure the caps overlap the wire from the inside before you clip it in place by pushing the wheel. It measures roughly 3x6 inches.
How Buying OEM Parts Can Save You Time and Money
Troubleshooting
This part fixes the following symptoms:
Not cleaning dishes properly | Door won’t close | Noisy | Door latch failure
This part works with the following products:
Dishwasher.
This part works with the following products:
KitchenAid, Whirlpool, Maytag, Kenmore.
Part# W10195416V replaces these:
AP5983730, W10195416, W10195416VP
Questions and Answers
We're sorry, but our Q&A experts are temporarily unavailable.
Please check back later if you still haven't found the answer you need.
82 questions answered by our experts.
< Prev
1
2
3
Next >
Sort by:
Search filter:
Clear Filter
Your search term must have 3 or more characters.
Keep searches simple. Use keywords, e.g. "leaking", "pump", "broken" or "fit".
Sorry, we couldn't find any existing answers that matched.Try using some different or simpler keywords, or submit your new question by using the "Ask a Question" button above!
Marcel
July 20, 2017
Both wheel assemblies on both sides of my lower dishrack are flimsy and not staying put. They’re basically falling off and I think they’re missing the pin thing. Do I need to order this whole assembly? And if this is happening on both sides do I need to order two of them?
Hi Marcel, to fix your lower dishrack and keep it from falling off you will have to order this assembly, as it is not sold separately. If you are replacing both sides you will need to order two of W10195416V. Please let us know if you have any further questions.
131 people found this helpful.
Was this helpful?
Thank you for voting!
Marsha Johnson
February 1, 2018
I only need the wheels for this model is it possible to just order the wheels only??
For model number 66513299K111
Hi Marsha,
Thank you for your question. The wheels for the lower dishrack assembly listed under your model number are sold in an assembly where each assembly has 2 wheels. The wheels are not sold separately. I hope this helps. Thank you and have a great day!
91 people found this helpful.
Was this helpful?
Thank you for voting!
Susan
March 9, 2018
The plastic pin that holds the wheel in place on the lower dish rack keeps popping out of the wheel, so it comes off. I'm hesitant to replace it with something that looks just as flimsy. Is it possible that a new wheel assembly would have wheel pins that lock in place more securely?
For model number KUDS35FXSS3
Hello Susan, thank you for your question. The wheel assembly part number W10195416V is the OEM replacement part for your unit. I don't believe they've made any changes to the part, however, we offer a 1 year warranty on all of our parts. If the part breaks within a year, we will replace it for you! I hope this information helps!
70 people found this helpful.
Was this helpful?
Thank you for voting!
David
September 5, 2017
Does this kit on line have 4 units with wheels or just 1 unit .
For model number W10195416V
Hi David,
Thank you for the question. They are sold individually, so you will receive one bracket/mount with 2 wheels attached.
Hope this helps!
68 people found this helpful.
Was this helpful?
Thank you for voting!
Craig
January 8, 2018
I need the wheels themselves not the whole lower dishrack wheel assembly, the racks are fine but the wheels, and the small post that connects it to the wheel assembly. These wheels keep coming off and breaking eventually. Can i get some of the wheels and posts only?
For model number KUDE60FXSS3
Hi Craig,
Thank you for your question. The wheels for the lower dishrack can be purchased separately. The part
number for the lower dishrack wheel assembly is PS11722152. I hope this helps. Thank you and have a great day!
41 people found this helpful.
Was this helpful?
Thank you for voting!
Ken
March 7, 2019
I need to replace the wheels on the bottom rack, both sides. What part should i order?
For model number KUDE48FXWH
Hello Ken, thank you for your question. The bottom rack wheels are Part Number: PS11722152. You would want to order 4 of these parts. I hope this helps!
29 people found this helpful.
Was this helpful?
Thank you for voting!
John
January 2, 2018
So, please clarify this for me. I will receive one plastic wheel replacement for $20? A pair for $40? And $80 to replace all 4 on the bottom rack? How long will these last with normal wear and tear?
For model number kudc10fxss5
Hi John,
Thank you for your question. Yes, those would be the costs to replace the parts. The parts should last along time if they are used as they are supposed to. I hope this helps. Thank you and have a great day!
17 people found this helpful.
Was this helpful?
Thank you for voting!
Kayla
July 20, 2017
If I’m having trouble rolling my lower dishrack this is what I need correct? Is this the whole assembly… I know it says assembly in the name but is this all I need?
Hi Kayla, this wheel assembly W10195416V is all you will need to fix your lower dishrack. I hope this helps!
15 people found this helpful.
Was this helpful?
Thank you for voting!
Robin
March 6, 2018
I need to replace one wheel assembly on my dishwasher so my husband thought we should replace all 4 since one is broken. Mine appears to have a different wheel assembly on the back, and the one shown is located on the front sides of the dishwasher. Do you sell the different one for the back?
For model number KUDS30SXSS0
Hi Robin, Thank you for the question. Checking the model number, it shows the front and rear wheels are the same, Part Number: PS11722152. Hope this helps!
13 people found this helpful.
Was this helpful?
Thank you for voting!
Cherie
July 20, 2017
Im having trouble removing the old wheel assembly, tips?
Hello Cherie, looking at the lower dishrack wheel assembly W10195416V, release the clips and twist outwards to lift the assembly off. You can then simply snap the new one in its place. Best of luck with this repair!
Plastic pieces had broken on both the top and bottom racks
The parts select site had an excellent breakdown of what I needed to replace. When I got the pieces, however, it wasn't so apparent how to do it. I actually used YouTube video to show the process.
The trickiest part was actually uninstalling the broken pieces. I had to work backwards through the YouTube video.
The other tricky bit is having a sense of how hard you can push to snap plastic pieces in and out.
Also, watch the whole video! I didn't, and I ran out for a tool (a star driver, I think that's what it's called) that was actually in the bag of screws that came with the assembly.
It seems like Kitchen Aid realizes they have a problem with plastic fatigue, because they have replaced some of the plastic parts with metal.
If you take your time and stay organized this is a very doable repair.
Very, Very easy - watched the Installation Video highlighted on web page and the entire process took less than 5 minutes!
Linda from TRES PINOS, CA
Difficulty Level:
Very Easy
Total Repair Time:
Less than 15 mins
1 personfound this instruction helpful.
Was this instruction helpful to you?
Thank you for voting!
Wheels fell off
These wheel assembly that came on the lower rack of my dishwasher were junk! They started falling off within 6 months. I put them back on to the point that the pin in the center of the wheels would no long stay in place, thus the frustrating situation of the wheels falling off often.
Assembly was easy peasy!
Jan B. from BEAVER, OK
Difficulty Level:
Really Easy
Total Repair Time:
Less than 15 mins
1 personfound this instruction helpful.
Was this instruction helpful to you?
Thank you for voting!
wheel broke off the lower rack on my dishwasher.
Just snapped in the wheel assembly very easy.
Marvin from WANTAGH, NY
Difficulty Level:
Really Easy
Total Repair Time:
Less than 15 mins
1 personfound this instruction helpful.
Was this instruction helpful to you?
Thank you for voting!
Lower rack's wheels broke, all 4 pairs
With a little pressure, I was able to push off the broken wheel pieces with my thumbs. I was able to snap on the new wheel pieces really easily. This job took less than 15 minutes to replace all 4 wheel pieces.
Carrie from SAN TAN VLY, AZ
Difficulty Level:
Really Easy
Total Repair Time:
Less than 15 mins
1 personfound this instruction helpful.
Was this instruction helpful to you?
Thank you for voting!
Replaced wheels on lower rack
My husband did the repair. It was very easy. He basically just popped off the old wheels and popped on the new ones.
Jane from JOLIET, IL
Difficulty Level:
Very Easy
Total Repair Time:
Less than 15 mins
Tools:
Screw drivers
1 personfound this instruction helpful.
Was this instruction helpful to you?
Thank you for voting!
The wheel fell from the lower dish rack--the front left hand side.
We snapped the old one off --it did not break. We positioned the new one in the right place making sure that the slot in the middle matched up with the longitudinal wire of the rack and snapped it in place. EASY!
Lana R from THE HILLS, TX
Difficulty Level:
Very Easy
Total Repair Time:
15 - 30 mins
1 personfound this instruction helpful.
Was this instruction helpful to you?
Thank you for voting!
< Prev
1
2
3
Next >
Customer Reviews
Average Rating:
★★★★★
★★★★★
321 Reviews
4.8
Filter By Rating:
5 Stars
283
4 Stars
25
3 Stars
6
2 Stars
2
1 Star
5
< Prev
1
2
3
Next >
Sort by:
Search filter:
Clear Filter
Your search term must have 3 or more characters.
Keep searches simple. Use keywords, e.g. "leaking", "pump", "broken" or "fit".
Sorry, we couldn't find any existing reviews that matched. Try using some different or simpler keywords.
★★★★★
★★★★★
Debra K - August 16, 2023
Verified Purchase
As order
Works and fits!
★★★★★
★★★★★
Anthony G - August 9, 2023
Verified Purchase
Easy to install. Works as good as original.
Took me 1 minute to repair my dishwasher
★★★★★
★★★★★
Michael B - August 5, 2023
Verified Purchase
Easy repair & great service!
Just like the original part. I replaced all 4 wheel sets in about five minutes. Now its just like new....very easy. Fast shipping and great service by PartSelect. I ordered 1 set thinking that would do all 4 sides but I had to order 3 more to finish the job. PartSelect sent the other 3 sets quickly and didn't charge for shipping even though the mistake was mine. Thanks!
★★★★★
★★★★★
Mark B - July 30, 2023
Verified Purchase
Exact replacement part!!
Very prompt delivery, exact part ordered and needed, very easy installation!!
★★★★★
★★★★★
Joan K - July 20, 2023
Verified Purchase
Easy to replace part.
Part was exactly what I needed. Dishwasher is still working well with it. Thanks for the self- confidence you gave me by making such a quality item.
★★★★★
★★★★★
CHARLES D - July 9, 2023
Verified Purchase
Easy Repair
The replacement parts are well worth the money.
Great buy
★★★★★
★★★★★
Kristen S L - July 7, 2023
Verified Purchase
Good replacement
This part came quickly and was very easy to install!
Needed to replace 2 broken Lower Dishrack Wheel Assemblies on my Whirlpool Dishwasher.
PartSelect website was easy to navigate through entire purchase process. Parts ordered were exact replacement Lower Dishrack Wheel Assemblies & were easy install. I will use PartSelect
again for all my Household Appliances Replacement Parts.
★★★★★
★★★★★
Lynn S - July 1, 2023
Verified Purchase
good part
Although expensive, the part was in good condition and easily installed. Works great.
★★★★★
★★★★★
Carol S - June 16, 2023
Verified Purchase
Dishwasher lower rack wheel assembly
Easy to install. It works!
< Prev
1
2
3
Next >
Model Cross Reference
This part works with the following models:
PartSelect Number: PS11722152
Manufacturer Part Number: W10195416V
