This water filter (Whirlpool EveryDrop Refrigerator Water Filter, Single Turn Filter) purifies water going to the water dispenser and sometimes the icemaker as well. This part should be replaced if it is causing reduced water flow or just replaced periodically per the owner manual. Replacing this water filter may fix a noisy or leaking fridge, a fridge that is not dispensing water (or reduced flow rate), and an ice maker that is not making ice at all, or not making enough ice. This filter is white, sold individually and measures 8 inches by 3 inches in diameter.
How Buying OEM Parts Can Save You Time and Money
Troubleshooting
This part fixes the following symptoms:
Not dispensing water | Ice maker not making ice | Leaking | Ice maker dispenses too little ice
We're sorry, but our Q&A experts are temporarily unavailable.
Please check back later if you still haven't found the answer you need.
77 questions answered by our experts.
< Prev
1
2
3
Next >
Sort by:
Search filter:
Clear Filter
Your search term must have 3 or more characters.
Keep searches simple. Use keywords, e.g. "leaking", "pump", "broken" or "fit".
Sorry, we couldn't find any existing answers that matched.Try using some different or simpler keywords, or submit your new question by using the "Ask a Question" button above!
Brian
July 20, 2017
I changed the water filter in my fridge because the order and replace light went from green to red. Now that its been replaced how do I make the light go back to green? Will it reboot on its own?
Hi Brian, after replacing the filter you can hold the reset filter pad for 3 seconds. This should turn the light off. Best of luck with this repair.
49 people found this helpful.
Was this helpful?
Thank you for voting!
Jones
July 20, 2017
My icemaker just stopped making ice and I know I need to replace the water filter ive just been dragging my feet about it. Is the icemaker cut off now because I need to replace my filter or is there another reason for it stopping now?
Hello Jones, we recommend replacing the water filter every 6 months, depending on how often you use it. Replacing or not replacing the filter would only affect the water dispenser, not the icemaker. The most common reason an icemaker does not get water would be a defective water valve WPW10270395. I hope this helps.
34 people found this helpful.
Was this helpful?
Thank you for voting!
Ivan
February 18, 2018
I just replaced my water filter on my Whirlpool gold however its making ice but its not dispensing water or ice. What van i do?
For model number G15SVAXVL01
Hi Ivan,
Thank you for your question. If there is no water or ice being dispensed, I would check the switch in the dispenser with a multimeter to see if it is working correctly. I hope this helps. Thank you and have a great day!
21 people found this helpful.
Was this helpful?
Thank you for voting!
Richard
December 2, 2017
How do you remove water filter?
For model number wrx735sdbm00
Hello Richard,
Thanks for your question. Open up the fridge section, and the filter will be in the back corner of the compartment. Open up the plastic covering. You will need to twist the filter counterclockwise, then remove it.
I hope this helps.
18 people found this helpful.
Was this helpful?
Thank you for voting!
Steve
December 7, 2017
Our fridge section is too cold. Adjusting the digital thermostat does not seem to help much.Water filter replacement comes up as the #1 solution.How does the water filter function affect fridge temp? Does seem to make sense. Thanks.
For model number GZ25FSRXYY0
Hi Steve, Thank you for the question, The suggestions are based on previous customers and what reason they gave for replacing a part. A customer replacing the filter may have clicked the wrong option in error. I suggest checking to make sure the Damper Control Assembly is not stuck open and allowing too much cold air through from the freezer. You can check to see if the flapper has froze open or if there is something blocking the flapper not allowing it to close.Hope this helps!
15 people found this helpful.
Was this helpful?
Thank you for voting!
Jauna
July 20, 2017
I didn't know I had to replace my water filter in my fridge. How often do you recommend we replace them?
Hi Jauna, we recommend replacing the water filter every 6 months to guarantee impurities are properly removed from your water, and there is a consistent flow rate. Please let us know if you have any further questions.
13 people found this helpful.
Was this helpful?
Thank you for voting!
Walter Henderson
July 22, 2017
My refrigerator is leaking water into the freezer. My model has the freezer on the bottom. Which part do you think i need
For model number gz25fsrxyy0
Hello Walter,
Thank you for the great question. Checking the symptom list something to check would be the water filter, If it needs to be replaced it might leak or if it is loose.You can also check to see if the reservoir tank at the back of the appliance has no leaks or the lines going to the tank.
I hope this helps!
11 people found this helpful.
Was this helpful?
Thank you for voting!
Greg
December 18, 2017
The water filter cover keeps on opening and the filter keeps dropping down. The little plastic clip is not holding the door in place. I can't seem to find the part anywhere for my kitchen aide refrigerator. I am using a soda bottle to hold the filter in place.
For model number kfis27cxwh3
Hello Greg, Thank you for your inquiry. The latch or clip for the filter cover is part# WP2223877. Hope this helps!
7 people found this helpful.
Was this helpful?
Thank you for voting!
Charles
November 19, 2018
The install video does not show shutting the water. Is it not necessary to shut off the water?
For model number MFI2269FRW00
Hi Charles,
Thank you for your question. No, you will not need to turn the water off to perform this repair. I hope this helps. Thank you and have a great day!
6 people found this helpful.
Was this helpful?
Thank you for voting!
Wayne
June 24, 2019
When I opened the filter cover the filter did not drop down like it did in the video. It is lodged in the compartment. How do I release it?
For model number MF12269FRZ02
Hello Wayne, Thank you for the question. If the filter is stuck, you may need to remove the Filter bracket, Part #: PS2069868 and cover Part #: PS11743682 to remove the filter. I also suggest checking them for any damage causing the filter to get stuck. Hope this helps!
Repair Tip: You will find the water filter in the back corner of the refrigerator. Open the plastic covering, unscrew the old filter and replace it with the new one.
Replacing your Maytag Refrigerator Water Filter
How to Troubleshoot a Refrigerator That Doesn't Make Ice
How to Troubleshoot a Refrigerator That Doesn't Make Ice
Customer Repair Stories
Average Repair Rating: 4.4 / 5.0, 40 reviews.
What's this?
< Prev
1
2
3
Next >
Sort by:
Search filter:
Clear Filter
Your search term must have 3 or more characters.
Keep searches simple. Use keywords, e.g. "leaking", "pump", "broken" or "fit".
Sorry, we couldn't find any existing installation instruction that matched.
light on to order water filter
Pressed in the end of the filter cover, lowered it down part way. Twisted the old filter 1/4 turn and removed it. Set in the sink to drain. Inserted new filter and twisted it to lock. closed cover. Done. Total time @ 1 Minute.
Douglas from Byron, NY
Difficulty Level:
Really Easy
Total Repair Time:
Less than 15 mins
884 of 981 peoplefound this instruction helpful.
Was this instruction helpful to you?
Thank you for voting!
Ice maker leaking at first then quit making ice all together
unplugged refrigerator and shut off water, removed one screw and loosened two more, after removing one side of the ice bucket rail, unplugged electrical from old ice maker. Then I removed the bail and out on new one, reinstalled ice maker in reverse order from taking it out.
The crisper drawer was broken on the slides and kept falling out. Also the filter needed changing as the red light was on.
By sliding the drawer out and lifting it up at the end, the drawer will come right out. By installing the new drawer in the same sequence, the job is completed. As for the filter, it is located inside the refrigerator compartment on the upper right side.Simply remove any items from the top shelf that may be in the way, and then push in on the tab that extends out from the filter housing. The filter and connector will swivel down at that point,simply hold the connector in one hand to stablize and with the other hand, twist the filter counter-clockwise to remove the filter. To reinstall the new filter, remove all protective covering from filter. Plase filter against filter connector and turn until tight (1/4-1/2 turn).Raise complete assemble upwads until tab snaps back into place. Installation is now complete, next purge the air out from water supply by placing a pitcher or other large container under the dispenser and activate.Run water for a minute or so until all air is removed.
Removing the existing filter by rotating as directed and then dislodging from 'docking' station proved difficult. Turns out, the old filter is under a bit of vacuum pressure and getting the unit to separate or release was a challenge.
I removed the drop-down outer housing by gently prying the sides of the two pivot pins at the rear. This gave me move 'room' to grip and slightly rotate then pull the old filter forward and away from the tight suction connection. I was concerned that I would be too forceful for the plastic assemblies and would break something; deliberate motions and a steady thought process on the problem helped disengage the darned old filter!
Jake from Novato, CA
Difficulty Level:
Easy
Total Repair Time:
Less than 15 mins
209 of 317 peoplefound this instruction helpful.
Was this instruction helpful to you?
Thank you for voting!
Needed to change water filter in refrigerator
The switch-out of the water filter was simple with good instructions on the box. The part was delivered very, very quickly!
Marilyn from Lilburn, GA
Difficulty Level:
Really Easy
Total Repair Time:
Less than 15 mins
160 of 246 peoplefound this instruction helpful.
Was this instruction helpful to you?
Thank you for voting!
water filter needed replacing
I unscrewed the old one and replaced it with the new one. The real benefit was I got the exact part I needed w/o a 30 minute drive and sales people that ignored me. I had gone to the local store the day before and come home with the wrong part because i could not get assistance and the part # I had did not match what was labled on the package. I used the same part # on the website and got exactly what was needed, less that 48 hrs after I ordered it. thanks for the prompt service. we will be a repeat customer
Kathryn from Cedar Springs, MI
Difficulty Level:
Really Easy
Total Repair Time:
Less than 15 mins
111 of 123 peoplefound this instruction helpful.
Was this instruction helpful to you?
Thank you for voting!
easy and quick
unscrewed to removed old and screwed in new
alvin from irmo, SC
Difficulty Level:
Really Easy
Total Repair Time:
Less than 15 mins
87 of 163 peoplefound this instruction helpful.
Was this instruction helpful to you?
Thank you for voting!
The crisper drawers had cracked runners
Crisper drawers: 1. Removed crisper drawers from refrigerator. 2. Removed drawer front decoration panels. 3. Unpacked, inspected and rinsed out new drawers. 4. Attached drawer front decoration panels. 5. Transfered vegetables and fruit from old drawers to new drawers. 6. Installed new drawers in refrigerator. 7. Closed refrigerator door. 8. Total time about 15 minutes, no tools required.
Ice & Water filter 1. Opened filter compartment cover 2. Removed old filter, drained into sink and placed in the trash. 3. Installed new filter 4. Bled the water line with ice water tap button (be aware when the air in the line exits the spigot, it create a lot of spray and you may need to cleanup the water that splash out of the bottom of the container used to capture the water during the bleeding process.) 5. Close the filter cover and refrigerator door. 6. Total time about 10 minutes and no tools required.
Nutdriver, Pliers, Screw drivers, Socket set, Wrench set
48 of 119 peoplefound this instruction helpful.
Was this instruction helpful to you?
Thank you for voting!
Front Ice Maker Display Flashing and Ice Maker Door Flapping Open and Closed
I firts pulled the refrigerator away from the wall. Un plugged it and removed a metal cover off of the back of the fridge. A clear plastic container was behind the metal pael. Removed the connectors and snapped the pld board out, Put in the new one and reinstalled the cover. Had to get the code number from theinside of the frifge and entered it into the front key pad. This step took a bit of figuring to advance the numbers using the key pad but with some trial and error...Repair done.
The Fix App makes it easy to manage all your stuff in one place. Just snap a photo and we'll find and store your user manuals, receipts, and product information in one easy-to-find place!
"Like magic. I took a picture of the model number on my refrigerator, and the app identified it right away … Very convenient. I'm impressed." ★★★★★ - Clever Jeff
