The function of the Refrigerator Water Filter is to filter the water supply to reduce and remove contaminants in your water supply for a certain period of time. The filter is meant to be easily accessible. You should be able to access it through the front, bottom panel of your fridge. This filter should regularly be replaced. It is recommended that the water filter be replaced every six months or every 200 gallons of water to ensure proper removal of impurities and to ensure best flow rates. If your filter isn't functioning properly, you will either get a buildup of impurities or impure water. A buildup of impurities will hinder the water flow to your refrigerator water dispenser and ice maker. If the water is still flowing but it has been more than 6 months since you changed the filter, impurities may be entering your water supply. This model is plastic, white, and measures 12 inches long and 2 inches in diameter. It is sold individually.
How Buying OEM Parts Can Save You Time and Money
Troubleshooting
This part fixes the following symptoms:
Ice maker not making ice | Not dispensing water | Leaking | Ice maker won’t dispense ice
We're sorry, but our Q&A experts are temporarily unavailable.
Please check back later if you still haven't found the answer you need.
81 questions answered by our experts.
< Prev
1
2
3
Next >
Sort by:
Search filter:
Clear Filter
Your search term must have 3 or more characters.
Keep searches simple. Use keywords, e.g. "leaking", "pump", "broken" or "fit".
Sorry, we couldn't find any existing answers that matched.Try using some different or simpler keywords, or submit your new question by using the "Ask a Question" button above!
Camille
December 3, 2018
Does this work with my model?
For model number KSRS25RVMK03
Hello Camille, Thank you for contacting us. I have researched the model you have provided and have found the part you’re looking for is PartSelect Number: PS11722128. Thank you for your inquiry, good luck with this repair!
37 people found this helpful.
Was this helpful?
Thank you for voting!
Rose
September 21, 2017
I just replaced my water filter and about to order more but noticed when I put the filter model number in the new one comes up white and my old one is black. Did they change the color.
For model number 4396841
Hi Rose,Thank you for the question. Yes the part number 4396841 was replaced with EDR3RXD1.This is a manufacturer substitution. Part may differ in appearance but is a functional equivalent to prior parts including. Hope this helps!
28 people found this helpful.
Was this helpful?
Thank you for voting!
Danny
July 20, 2017
I change my water filter at least once a year and I always use the same one. When I pushed this one into place it wouldn’t click like it normally does and then water starts leaking. I don’t understand why this isn’t working. Was the filter changed or is there a problem with my fridge?
Hi Danny, this sounds like a problem with your filter housing. It should be replaced. I hope this helps.
19 people found this helpful.
Was this helpful?
Thank you for voting!
Ronald
July 22, 2017
Cap is missing can't get the filter out
For model number 10658422700
Hi Ronald,
Thank you for contacting us. Sorry to hear you are missing the cap. They have a White Cap part number PS11739972 and a Black Cap part number PS11739970 listed. They booth show in stock and ready to ship online. If you need the filter removed before you can order the cap you should be able to use a pair of pliers to hold onto the end of the filter and push in a bit and it should pop out.
Hope this helps!
16 people found this helpful.
Was this helpful?
Thank you for voting!
Bob
September 9, 2017
When changing the water filter, do i need to turn the water off and if so how do i do it?
For model number ED5FHAXSB02
Hello Bob, thank you for contacting us. Yes you do want to shut off the water to the fridge. It would be the water supply in your home, wherever you have that located just turn it off there, then you can replace the water filter. Good luck with the repair!
16 people found this helpful.
Was this helpful?
Thank you for voting!
Marty
July 20, 2017
Can’t get my water filter out. On this model I have a push button and it should just pop out and I jiggle it the rest of the way but the button seems jammed and doesn’t work and I can’t tug it or rock it out. I don’t want to hurt the housing so what should I try next.
Hi Marty, unfortunately if the button is stuck, and the filter is stuck inside of the housing, the whole filter assembly will need to be replaced. I hope this helps.
8 people found this helpful.
Was this helpful?
Thank you for voting!
Barb
November 29, 2018
I put my new water filter in and it clicked on the button popped back out but i am not getting the light to reset in the refrigerator us saying that it’s got a new filter how do i reset the filter light
For model number Jf42nxfxdw01
Hello Barb, thank you for your question. To Reset The Filter Display Message (For Models With An Internal Water Dispenser): Press and hold both the "Fridge/ Power Cool" button for 3 seconds, or until the display resets. If done correctly, the Filter Display Message should be reset. I hope this helps!
7 people found this helpful.
Was this helpful?
Thank you for voting!
Gio
July 20, 2017
So for some reason my filter wont go in my fridge. I use the same brand and have never had a problem. Ive tried three times and nothing works and I don’t want to break anything. The kicker is that my old one is sliding in and out with no problem, what do you suggest? Thanks
Hi Gio, if the filter is not going in, then the filter is the problem. You could try to put a few drops of vegetable oil on the seal to see if it helps slide the filter into place. Best of luck with this repair!
6 people found this helpful.
Was this helpful?
Thank you for voting!
Maga
August 28, 2017
Today i went to get the water filter and its being discontinued. Where can i buy it
For model number 106.56532400
Hello Maga, thank you for contacting us. We have that part in stock, part number PS11722128. Hope this helps!
5 people found this helpful.
Was this helpful?
Thank you for voting!
Vicki
November 4, 2017
I changed my water filter and now there is no water to the dispenser or the ice maker, what do I do?
For model number 10656532400
Hello Vicki,
Thanks for your question. It would be a good idea to check the water inlet valve, part number PS3497634, and to test it with a multi-meter for continuity if it does not have 20 psi. If it does not have continuity, replace it. Be sure to also check the water supply going to the water inlet valve.
I hope this helps.
Repair Tip: This part has been updated by the manufacturer, it may look different but will still function the same. Shut off the water supply to your refrigerator before replacing the filter.
Replacing your Kenmore Refrigerator Refrigerator Water Filter
How to Troubleshoot a Refrigerator That Doesn't Make Ice
Customer Repair Stories
Average Repair Rating: 4.6 / 5.0, 33 reviews.
What's this?
< Prev
1
2
3
Next >
Sort by:
Search filter:
Clear Filter
Your search term must have 3 or more characters.
Keep searches simple. Use keywords, e.g. "leaking", "pump", "broken" or "fit".
Sorry, we couldn't find any existing installation instruction that matched.
there were directions
We didn't know where the product went and it was very difficult to install.
Kate from Jacksonville, FL
Difficulty Level:
Very Difficult
Total Repair Time:
30 - 60 mins
748 of 1260 peoplefound this instruction helpful.
Was this instruction helpful to you?
Thank you for voting!
six months the light turns red. time to replace filter
First I shut the water off to the refrigerator.then i pushed the big button in the middle of the grille below the refrigerator door. pulled out the old filter, took the front cap off the old filter put it on the new filter. took the two red caps off the new filter. pushed the filter in till it locked in place. all done! Turned the back on.
Leroy from Perkiomenville, PA
Difficulty Level:
Really Easy
Total Repair Time:
Less than 15 mins
304 of 382 peoplefound this instruction helpful.
Was this instruction helpful to you?
Thank you for voting!
Water filter replacement
It's simple enough in theory: read the side of the box and follow the instructions. BUT you need to really push the knob in pretty hard (I am a girl, and my hand strength isn't that good). If you don't, when you turn the knob, the filter won't come out, then it's tougher. So: make sure the knob pops before you turn!
Victoria from Beaverton, OR
Difficulty Level:
Easy
Total Repair Time:
Less than 15 mins
140 of 182 peoplefound this instruction helpful.
Was this instruction helpful to you?
Thank you for voting!
change the water filter light was on.
It was ridiculously easy. Push the button on the filter canister holder at the base of the refrigerator and the spring-loaded mechanism came out smoothly. I unplugged the old filter, took the cap off the new on and plugged it in. After reinserting the filter canister holder and locking it in place, I heard the whoosh of water once again moving through the filter. Very satisfying and very easy to do.
Kenneth from SAn Francisco, CA
Difficulty Level:
Really Easy
Total Repair Time:
Less than 15 mins
101 of 125 peoplefound this instruction helpful.
Was this instruction helpful to you?
Thank you for voting!
Change Out Filter
It turn one turn on the filter holder, pull out and put new filter in done
Baerbel from Jacksonville, FL
Difficulty Level:
Really Easy
Total Repair Time:
Less than 15 mins
62 of 95 peoplefound this instruction helpful.
Was this instruction helpful to you?
Thank you for voting!
Washing poorly, leaving particles of food on top of the dishes, not draining completely, ceiling spray arm not spinning (bent up to the ceiling)
The lower spray arm unscrews. From inside the dishwahser, put a screwdriver through the tab slots and unscrew the tower from the floor. It's pretty tight for plastic. The upper spray arm has screws on the top of the dishwasher. You must slide the dishwasher out from underneath the countertop to get to the screws. Normally that's just the two screws above the door that screw into the countertop. Pull the insulation back and unscrew the arm from the top of the dishwasher. Reverse to reinstall. Piston and nut assembly for check valve: Inside the dishwasher at the back there are 2 screws that hold a screen down. Remove the screen. Take out the check valve and replace it. It was still functional in mine, it looked like food gunk had built up on it and impeded the check valve action. The flapper chec is a rubber flap in the drain tube that connects to your sink drain. You have to pull the dishwasher out from under the sink to get to the end of the drain tube that connects to the dishwasher. Take the hose clamp loose and remove the drain tube from the dishwasher. Then unscrew the plastic fitting that you just took the drain tube off of. The flapper chec is there. It had turned brittle and didn't flap anymore. It is a similar setup to the rubber seal at the end of your garden hose.
It was SOOO easy, I turned and popped out the old filter and turned and snapped in the new one....I don't even think it took a whole minute to replace!!
Leslie from Nipomo, CA
Difficulty Level:
Really Easy
Total Repair Time:
Less than 15 mins
31 of 43 peoplefound this instruction helpful.
Was this instruction helpful to you?
Thank you for voting!
Refrigerator indicated that water filter needed replacement
It took less than 5 minutes to remove the old filter and install the new one. Push a button and the old one pops out, stick in the new one, and you're done.
Roy from The Villages, FL
Difficulty Level:
Really Easy
Total Repair Time:
Less than 15 mins
29 of 41 peoplefound this instruction helpful.
Was this instruction helpful to you?
Thank you for voting!
Ice maker stopped working.
Removed the icemaker to see if I could determine problem; motor was seized; got part numbers and ordered from you; parts arrived next day (even though overnight delivery wasnt' requested - so THANK YOU!); compared new parts to original to be sure of fit; reassembled unit; reinstalled in freezer, and waited for the sound of water filling the tray. Producing like brand new again! Cancelled the service call w/ Sears for the following week (when it was convenient for them) Loved your service!
Keep searches simple. Use keywords, e.g. "leaking", "pump", "broken" or "fit".
Sorry, we couldn't find any existing reviews that matched. Try using some different or simpler keywords.
★★★★★
★★★★★
Sandy G - April 14, 2023
Verified Purchase
Easy exchange
Part was delivered quickly
★★★★★
★★★★★
Charlotte D - March 18, 2023
Verified Purchase
easy reokacement
i have no mechanical abilities but was able to remove the old filter and replace it with the new filter. very, very easy.
★★★★★
★★★★★
Bertha G - January 30, 2023
Verified Purchase
Good quality
Very easy to install.
★★★★★
★★★★★
Glenn G - January 9, 2023
Verified Purchase
Frig water filter
5 minute replacement, perfect fit…wish it wasn’t so expensive!
★★★★★
★★★★★
Ronald K - December 26, 2022
Verified Purchase
Price
Buying direct from Whirlpool is a LOT cheaper! I won’t be ordering future filters from you.
★★★★★
★★★★★
Leah G - December 19, 2022
Verified Purchase
GOOD ON TIME SERVICE
EXCELLENT ON TIME PURCHASE.
★★★★★
★★★★★
Douglas D - December 15, 2022
Verified Purchase
Part Fit Perfectly
I was worried that the part I was ordering through the mail would not be an exact replacement part, but it fit exactly. When an individual orders a part through the mail you run a risk of it being something that does not work. You can not see it and you can not compare it with the old part. The filter for our refrigerator must be exact. There was no room for almost. It must be exact or it would not fit. Your replacement part fit perfectly. Thanks.
★★★★★
★★★★★
Marjie H - December 8, 2022
Verified Purchase
Easy installation
This part works amazingly well, and is easy to change!
★★★★★
★★★★★
Georgia G - December 1, 2022
Verified Purchase
Easy Peasy
The part was readily available. Easy to order online and day to install. The part was shipped and arrived as promised.
★★★★★
★★★★★
Jessica D - November 6, 2022
Verified Purchase
Great auto order
My filter always shows up on time and I don’t have to worry about forgetting. Very convenient!
< Prev
1
2
3
Next >
Model Cross Reference
This part works with the following models:
PartSelect Number: PS11722128
Manufacturer Part Number: EDR3RXD1
The Fix App makes it easy to manage all your stuff in one place. Just snap a photo and we'll find and store your user manuals, receipts, and product information in one easy-to-find place!
"Like magic. I took a picture of the model number on my refrigerator, and the app identified it right away … Very convenient. I'm impressed." ★★★★★ - Clever Jeff
