This replacement inlet drain hose connects your washer's water pump to its tub. This hose is seven and a half inches in length and only two inches wide.
How Buying OEM Parts Can Save You Time and Money
Part Videos
Replacing your General Electric Washer Pump to Tub Inlet Drain Hose
Keep searches simple. Use keywords, e.g. "leaking", "pump", "broken" or "fit".
Sorry, we couldn't find any existing reviews that matched. Try using some different or simpler keywords.
★★★★★
★★★★★
Amanda T - October 6, 2023
Verified Purchase
easy repair
great fit
★★★★★
★★★★★
Olga D - March 27, 2021
Verified Purchase
Pump
This part came in perfect condition, and was extremely easy to install.
Thank you !!! his is the second time I have purchased from this company and will continue to do so.
★★★★★
★★★★★
Denise M - June 13, 2020
Verified Purchase
Perfect!
Perfect!
★★★★★
★★★★★
Kristy P - December 29, 2019
Verified Purchase
Great part
This part was exactly what I needed. Washer is working as it was before.
★★★★★
★★★★★
Nikija L - May 3, 2019
Verified Purchase
Easy Peasy Fix
My washer machine is LG but this worked fine. I recently purchased a used washer that I quickly found out had a leak. Did a little investigating and found that the pump to drain tube was worn. Part was a little bigger width wise compared to my original LG part..... So I brought a clamp that you can tighten for both ends and it worked just fine! I ordered this and came right away. Now I can brag that I fixed the washer all on my own! # Best DIY mom ever
★★★★★
★★★★★
Aimee L - January 29, 2019
Verified Purchase
Easy repair
Everything is working great
★★★★★
★★★★★
Juan M - November 28, 2018
Verified Purchase
Easy repair
The part that I ordered was correct, came on time and my appliance is working again
★★★★★
★★★★★
Matthew H - August 8, 2018
Verified Purchase
No More Leaking!
I had tried and tried to seal a small hole in the original part, but to no avail. I don't know why I didn't check the PartSelect website sooner!
< Prev
1
Next >
Customer Repair Stories
Average Repair Rating: 4.3 / 5.0, 26 reviews.
What's this?
Sort by:
< Prev
1
2
3
Next >
Search filter:
Clear Filter
Your search term must have 3 or more characters.
Keep searches simple. Use keywords, e.g. "leaking", "pump", "broken" or "fit".
Sorry, we couldn't find any existing installation instruction that matched.
Would not drain and hose had a hole
Removed front with putty knife to unlock hinge.removed and checked pump removed hose clamps with wrench and nut driver replaced hose reverse procedure
Clifton from WAUKEGAN, IL
Difficulty Level:
A Bit Difficult
Total Repair Time:
30 - 60 mins
Tools:
Nutdriver, Socket set, Wrench (Adjustable)
1 personfound this instruction helpful.
Was this instruction helpful to you?
Thank you for voting!
Small wire had tried spin out of drain pump. Wore pin hole in the rubber drain hose....
Unplugged...Removed back from washer...Using nut driver-cordless drill...Inspected hose-found leak....Removed hose with pliers & screw driver.....Than dried the hose...& than for temporary fix (for the wife to continue washing) used some Epoxy for rubber.....Than ordered new part. Received and reinstalled replacement. Thank you
Steven from PLAINS, MT
Difficulty Level:
Very Easy
Total Repair Time:
15 - 30 mins
Tools:
Nutdriver, Pliers, Screw drivers
2 of 2 peoplefound this instruction helpful.
Was this instruction helpful to you?
Thank you for voting!
Small leak from a tiny hole in the drain hose
Simply unclamped the lower end of the hose, then used the nut driver to release the upper clamp of the hose. Took it off, replaced it with the new hose and re-clamped both ends. It took me about 12 minutes to do this. Very easy repair!!
Kathy from Tallahassee, FL
Difficulty Level:
Really Easy
Total Repair Time:
Less than 15 mins
Tools:
Nutdriver, Pliers
1 personfound this instruction helpful.
Was this instruction helpful to you?
Thank you for voting!
had a pin hole in the drain pipe
order the part and replaced it and it works just great! May I add never before have I had such an amazing experience in dealing with your company, your company shows pictures and I ordered the part in the late afternoon and I had it the next day, the diagram you show on your site was so helpful, you told us that the part now is replaced w
... Read moreith a different #. Once again KUDOS!! to your co.
Pulled front panel of washing machine, removed hose, installed new hose, and wipped up water.Simple!!!
Steve from Ogema, WI
Difficulty Level:
Really Easy
Total Repair Time:
Less than 15 mins
Tools:
Pliers, Screw drivers
3 of 4 peoplefound this instruction helpful.
Was this instruction helpful to you?
Thank you for voting!
Washing Machine Leaky Hose
I replaced the hose between the tub and the pump. The only difficulty came with the accessibility of the problem area. I just pulled off the front panel of the machine and used a screwdriver and pliers to loosen the attachments and put the new hose in place.
Kiel from Laughlin AFB, TX
Difficulty Level:
Really Easy
Total Repair Time:
Less than 15 mins
Tools:
Pliers, Screw drivers
3 of 3 peoplefound this instruction helpful.
Was this instruction helpful to you?
Thank you for voting!
1)pump leak damage,2) water over fill and leak water out the top
First I disconnect the power and then I pull the front cover and replace the water pump, drain hose, and the inlet hose this was fixed and straight easy job.My second problem was the overfill problem witch I took the knobs cover and I replace the water level switch.This job was also easy but did not fix my problem.
Hose had developed a slit in the seam nearest to the tub and was pouring out the water flooding the basement where the washer is located.
Lay the drain pipe lower than the tub to remove any excess water in the tub and lines. Loosened clamp on the tub side with a screwdriver then removed hose from the tub. I used pliers to pinch clamp and remove hose from pump. To install hose put clamps on hose then mount to the pump and the tub then tighten clamps.
Jack from Hazard, KY
Difficulty Level:
Really Easy
Total Repair Time:
Less than 15 mins
Tools:
Pliers, Screw drivers
1 of 2 peoplefound this instruction helpful.
Was this instruction helpful to you?
Thank you for voting!
< Prev
1
2
3
Next >
Questions and Answers
Ask our experts a question about this part and we'll get back to you as soon as possible!
2 questions answered by our experts.
Sort by:
< Prev
1
Next >
Search filter:
Clear Filter
Your search term must have 3 or more characters.
Keep searches simple. Use keywords, e.g. "leaking", "pump", "broken" or "fit".
Sorry, we couldn't find any existing answers that matched.Try using some different or simpler keywords, or submit your new question by using the "Ask a Question" button above!
Vigdor Sofer
March 28, 2018
Is part wh41x22935 for my washer ? If yes it is for outside use ?
For model number GTWN4250M1WS
Hello Vigdor, thank you for your question. Yes, part number Pump to Tub Inlet Drain Hose WH41X22935 is compatible for your appliance. This is the hose that runs from the outer tub to the drain pump. It is about 7 inches long and corrugated in the middle. The ends are round smooth ends to go over the port on the outer tub, and the drain pump and are attached with clamps. I hope this helps!
2 people found this helpful.
Was this helpful?
Thank you for voting!
Larry
November 15, 2019
Water will not drain.
For model number HSWP1000MWW
Hi Larry, most likely cause is Drain Pump and Motor Assembly part PS8768445 for model HTWP1000M0WW. Thank you for your question and good luck with your repair!
