11721506-1-M-GE-WD35X21035-Wheel and Stud
Part Location Diagram of WD35X21035 GE Wheel and Stud
See part 700 in the diagram
( Grid squares measure 1x1 inch )
11721506-1-S-GE-WD35X21035-Wheel and Stud 11721506-2-S-GE-WD35X21035-Wheel and Stud 11721506-3-S-GE-WD35X21035-Wheel and Stud Part Location Diagram of WD35X21035 GE Wheel and Stud
Customer Service Representative

Get in touch, we're here to help!

Daily 8am - 9pm EST

customerservice@partselect.com

Wheel and Stud WD35X21035

Rated by 5 customers 

Really Easy 

Less than 15 mins 

Ratings submitted by customers like you who bought this part.

$ 47.15
  In Stock
Get FREE EconoShip on orders over $100! T&C apply

Get this part fast! Average delivery time for in-stock parts via standard shipping: 1.8 days.

PartSelect Number PS11721506
Manufacturer Part Number WD35X21035
Manufactured by GE
Product Description

Wheel and Stud Specifications

Includes 4 rollers.
How Buying OEM Parts Can Save You Time and Money

How Buying OEM Parts Can Save You Time and Money

Troubleshooting
This part works with the following products:
Dishwasher.
This part works with the following products:
General Electric, Hotpoint.
Part# WD35X21035 replaces these:
WD12X10202, WD12X10329
Back to Top
Customer Repair Stories
 Average Repair Rating: 4.6 / 5.0, 5 reviews. What's this?
Sort by:
  • 1
Search filter:
Clear Filter
Your search term must have 3 or more characters.
Keep searches simple. Use keywords, e.g. "leaking", "pump", "broken" or "fit".
Sorry, we couldn't find any existing installation instruction that matched.
Upper tray rollers broke
Three of the four roller of my upper shelf of my dishwasher had broken...I went on line and in ten minutes ordered my rollers....a few days later rollers came and within fifteen minutes my dishwasher was up and running.....thank you so much....I will absolutely use this site again for future repairs....Thanks again. Marlene Martin
  • Marlene from Hopwood, PA
  • Difficulty Level:
    Really Easy
  • Total Repair Time:
    Less than 15 mins
  • Tools:
    Screw drivers
3 of 4 people found this instruction helpful.
Was this instruction helpful to you?
Thank you for voting!
Upper tray very difficult to pull out and push in
Using a screwdriver removed upper tray slide end caps.
Removed upper tray.

Removed and replaced upper tray rollers.

Using screwdriver removed track rollers and Track.

Assembled track with rear stops.
Installed lower track rollers.
Holding track in place installed upper track rollers. Installed upper tray and and front track stops.
Read less
Other Parts Used:
RACK SLIDE END CAP Wheel and Stud Upper Rack Slide Upper Track Roller Kit
  • ROBERT from YOUNGSTOWN, OH
  • Difficulty Level:
    Easy
  • Total Repair Time:
    30 - 60 mins
  • Tools:
    Screw drivers
6 of 9 people found this instruction helpful.
Was this instruction helpful to you?
Thank you for voting!
The wheels on the upper basket had broken
I removed the plastic end caps by gently pushing and twisting them. Once the end caps were off the basket slid out. The old wheels were removed and the new ones clipped in very easily. I then slid the basket back into place and replaced the end caps. The most difficult part was removing the end caps. I was afraid that I would break them, but by being careful and not forcing the piece they easily came off.
Read less
  • LELAH from LANSING, MI
  • Difficulty Level:
    Really Easy
  • Total Repair Time:
    Less than 15 mins
2 of 4 people found this instruction helpful.
Was this instruction helpful to you?
Thank you for voting!
Broken Upper Rack Wheel and Stud Assembly
I removed top dishwasher rack, popped off broken studs, and removed wheels from the tracks. I replaced studs on rack by popping them into place, and I slid new wheels back into wheel tracks. I place new studs into wheel assembly, slid rack back into dishwasher and replaced stoppers at the front of the tracks.
  • Irma from Smyrna, GA
  • Difficulty Level:
    Really Easy
  • Total Repair Time:
    Less than 15 mins
  • Tools:
    Screw drivers
2 of 2 people found this instruction helpful.
Was this instruction helpful to you?
Thank you for voting!
Broken original part
Took 5 minutes. Snap the old part off and replace with the new part. No problem.
  • Stan from Westminster, CO
  • Difficulty Level:
    Really Easy
  • Total Repair Time:
    Less than 15 mins
  • Tools:
    Screw drivers
4 of 4 people found this instruction helpful.
Was this instruction helpful to you?
Thank you for voting!
  • 1
Back to Top
Questions and Answers

Be the first to ask our experts a question about this part!

Back to Top
You May Also Need ?
RACK SLIDE END CAP
$12.63
$12.63
  In Stock
Back to Top
Model Cross Reference
This part works with the following models:
PartSelect Number: PS11721506
Manufacturer Part Number: WD35X21035
Brand
Model Number
Description
General Electric
4070100
Dishwasher
General Electric
4070110
Dishwasher
General Electric
4070500
Dishwasher
General Electric
4070510
General Electric
4070600
Dishwasher
General Electric
4070610
Dishwasher
General Electric
4070800
Dishwasher
General Electric
4070810
General Electric
EDW5000L00BB
Dishwasher
General Electric
EDW5000L00CC
Dishwasher
General Electric
EDW5000L00WW
Dishwasher
General Electric
EDW5000L15BB
Dishwasher
General Electric
EDW5000L15CC
Dishwasher
General Electric
EDW5000L15WW
Dishwasher
General Electric
EDW5060L00SS
Dishwasher
General Electric
EDW5060L15SS
Dishwasher
General Electric
GHD4309L15BB
Dishwasher
General Electric
GHD4309L15CS
Dishwasher
General Electric
GHD4309L15WW
Dishwasher
General Electric
GHD4309L20BB
Dishwasher
General Electric
GHD4309L20CS
Dishwasher
General Electric
GHD4309L20WW
Dishwasher
General Electric
GHD4309N10BB
Dishwasher
General Electric
GHD4309N10CS
Dishwasher
General Electric
GHD4309N10WW
Dishwasher
General Electric
GHD5711L15BB
Dishwasher
General Electric
GHD5711L15SS
Dishwasher
General Electric
GHD5711L15WW
Dishwasher
General Electric
GHD5711L20BB
Dishwasher
General Electric
GHD5711L20SS
Dishwasher
Back to Top
Customer Service Representative

Get in touch, we're here to help!

Daily 8am - 9pm EST

Contact Customer Service
Wheel and Stud
$ 47.15
  In Stock
✖
Stock Status
 In Stock

Item is in stock and will ship today if your order is placed before 4:00 PM Eastern Standard Time.

If your order is placed after 4:00 PM EST, the in stock items will ship on the next business day.

 On Order

Item is not in stock and usually ships 3-5 business days from the time you place your order.

 Special Order

Item is not in stock and usually ships 10-15 business days from the time you place your order.

 NLA - No Longer Available

This item is no longer being made by the manufacturer, and cannot be added to your shopping cart.