Ask our experts a question about this part and we'll get back to you as soon as possible!
3 questions answered by our experts.
Sort by:
< Prev
1
Next >
Search filter:
Clear Filter
Your search term must have 3 or more characters.
Keep searches simple. Use keywords, e.g. "leaking", "pump", "broken" or "fit".
Sorry, we couldn't find any existing answers that matched.Try using some different or simpler keywords, or submit your new question by using the "Ask a Question" button above!
Gregory
December 2, 2019
When the dryer start button is pressed, it does nothing. But when the washer is pressed it runs normal
For model number FFLE4033QT
Hello Gregory and thanks for writing.
It is possible it is the board but more likely and worthwhile checking it is the thermal limiter # PS419402 or the terminal block # PS419369. We hope this helps. Please contact us anytime.
My dryer keeps beeping. Just single beeps once every second or so, pausing for a bit here and there. Have to cut the power to shut it up.
Doesn’t matter if door is open or closed, or if dryer has been run recently or hasn’t been run in days, so shouldn’t be thermal limiter.
Dryer also won’t stay on. Beeps and shuts off anywhere from 2 seconds after starting up to half an hour after starting.
Tech came out and said likely is whatever part is behind the dryer’s dial. Tightening everything down and vacuuming out any lint didn’t help.
Would this be the part the tech mentioned?
For model number FFLE40C3QT0
Hi Lacey, thank you for the question. Based on the description that you have provided, we would recommend replacing the control board, part number PS11703854, to solve the problem. We hope that helps!
Was this helpful?
Thank you for voting!
Roel
April 12, 2024
After the cycles, when ready to take out the laundry, I notice that the clothes are still wet (too wet to be put into the dryer). What can be the problem?
I have recently replaced the control board, but still have the same issue.
Washer Motor Control Board 808653801
For model number FFLE4033QT0
Hi Roel, thank you for getting in touch. Based on our understanding of the issue, we would suggest replacing the drain pump, part number PS16218540, to solve the problem. Glad to be of assistance!