Ask our experts a question about this part and we'll get back to you as soon as possible!
5 questions answered by our experts.
< Prev
1
Next >
Sort by:
Search filter:
Clear Filter
Your search term must have 3 or more characters.
Keep searches simple. Use keywords, e.g. "leaking", "pump", "broken" or "fit".
Sorry, we couldn't find any existing answers that matched.Try using some different or simpler keywords, or submit your new question by using the "Ask a Question" button above!
William
February 2, 2018
Does this cover the holes in the frame that the screws use to mount it in the cabinet? If so, how many come in an order?
For model number KDTE104ESS1
Hi William,
Thank you for your question. Yes this part covers the holes along the front tub frame. They are sold individually. I hope that helps. Good luck with your repair.
6 people found this helpful.
Was this helpful?
Thank you for voting!
Mike
May 3, 2018
Thank you for your previous reply. May i ask a follow up question? The dish washer door becomes a bit ajar in the middle of the wash cycle and the dish washer shuts off at that moment. When i then push both sides on the top part of the door, the wash restarts and finishes and all is well. Might this description help you to determine which of the parts that you previously mentioned might be the shut off problem part and should be checked/replaced first? Thank you
For model number KUDP01FLSS6
Hello Mike, thank you for your question. If the unit is shutting off sporadically and pushing on the top parts of the door activates the washer again, the issue is with the door latch and switches. You would want to replace both switches, part number Door Switch PartSelect Number: PS11745501. Good luck with your repair!
2 people found this helpful.
Was this helpful?
Thank you for voting!
Mike
May 2, 2018
The door is opening while the dishwasher is running and this is causing a shutoff of the dishwasher. I noticed that one of the tub cap points (part ps11703426) is cracked and somewhat bent. The other tub cap seems fine. Can this be the cause for the door to open? Thank you.
For model number KUDP01FLSS6
Hi Mike,
Thank you for your question. The tub cap is just one part that you will have to check. There are some parts that you will need to check to see which ones are causing the issue. You will need to check the door balance link kit, the strike plate, the door latch, the door balance spring, the detergent and rinse aid dispenser and the door hinges. I hope this helps. Thank you and have a great day!
1 person found this helpful.
Was this helpful?
Thank you for voting!
Gary
November 10, 2022
There is an inlet that lets water into the dishwasher on the left side I believe ther was some kind of cover that may have been broke of because it really shoots water out of there and causes it to shoot out the door.
For model number 66515751791
Hi Gary, thank you for reaching out. Based on the trouble you are experiencing, the Water Inlet Valve appears to be faulty and you may need to replace it with part number PS11730996. If you need help placing an order, customer service is available 7 days a week. Glad to be of help!
Will this cover the side hole after placing the side mount screw to a cabinet?
For model number MDB4949SKZ1
Hello John, thank you for your inquiry. Yes. These Caps cover screw holes along the edge of the dishwasher tub. Sold individually. Good luck with this repair.
Was this helpful?
Thank you for voting!
< Prev
1
Next >
✖
Ask a Question
Ask our experts a question on this part and we'll respond as soon as we can.
Something went wrong. Please try again later.
Your Question Has Been Submitted!
Our experts will send you an email as soon as your question has been answered.
Customer Repair Stories
Average Repair Rating: 3.8 / 5.0, 1 reviews.
What's this?
< Prev
1
Next >
Sort by:
Search filter:
Clear Filter
Your search term must have 3 or more characters.
Keep searches simple. Use keywords, e.g. "leaking", "pump", "broken" or "fit".
Sorry, we couldn't find any existing installation instruction that matched.
Dish rack slide arms losing ball bearings
Unscrewed mounting screws, pulled dishwasher out halfway, replaced arms, 4 screws each side .....very simple 30 min tops. Parts perfect and quick delivery!
Keep searches simple. Use keywords, e.g. "leaking", "pump", "broken" or "fit".
Sorry, we couldn't find any existing reviews that matched. Try using some different or simpler keywords.
★★★★★
★★★★★
John F - August 14, 2018
Verified Purchase
Didn’t fit
I believed this part may have been a “fix” to the door opening during the wash cycle based on comments I read online with the same issue. What I found out was two things, first it was the wrong part , but more importantly it has nothing to do with keeping the door closed. This is a plug that covers the hole to allow the side mounting screws into the cabinet. If you read what I did someone clearly didn’t understand the purpose of these plugs
With the Fix app, you can quickly and easily find information on your appliance, along with videos and articles to help you fix it.
"Like magic. I took a picture of the model number on my refrigerator, and the app identified it right away … Very convenient. I'm impressed." ★★★★★ - Clever Jeff
★★★★★
You added 1 item to your cart
✖
$
Qty:
Total item(s) in cart:
Order Subtotal
$
*Taxes and shipping will be applied during checkout
Your Subscriptions
Same-day Shipping
Ships from USA
1 Year Warranty
365 Day Returns
