Keep searches simple. Use keywords, e.g. "leaking", "pump", "broken" or "fit".
Sorry, we couldn't find any existing answers that matched.Try using some different or simpler keywords, or submit your new question by using the "Ask a Question" button above!
April 23, 2018
My dishwasher is flashing F2E2 what dose it mean. Will not start
For model number ADB1700ADB1
Thank you for your question. The F2E2 error code means that your electronic control board is having a communication error. Something that you can do is cut the power to your appliance for about 5 minutes. If after you plug it back in, you still get the problem, you may have to replace the board. I hope that helps. Good luck with your repair.
Was this helpful?
Thank you for voting!
December 17, 2019
The start button quit working on my dishwasher, all the there lights and buttons are on except the start. I’m wondering if part ps11703328 is what i need? Thank you!
For model number 66513222N4
Hello Jan and thanks for writing.
Unlock your Kenmore dishwasher control panel by pressing and holding the "Heated Dry" button for four seconds. Press a series of four buttons in quick succession. Press "Heated Dry," "Normal Wash," "Heated Dry" and "Normal Wash" to instruct your Kenmore dishwasher to run a short diagnostic test.
Start button # PS10062096. We hope this helps. Please contact us anytime.